• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.116.1-116.1
• /
• 2017

본 연구는 PVD와 CVD를 동시에 사용한 하이브리드 공정시스템을 이용하여 Ti를 도핑한 Diamond-like carbon(DLC) 코팅 전극의 특성 분석에 대한 내용을 다루고 있다. DLC는 높은 경도, 낮은 마찰 계수, 화학적 안정성 등의 좋은 기계적 물성을 가지고 있어 주로 내마모성이 요구되는 분야에 주로 적용되어 왔다. 또한 DLC는 넓은 전위창 및 낮은 백그라운드 전류 등의 전기화학적 특성을 가지고 있어 최근 전극용으로 전도유망한 소재로 주목받고 있지만, 높은 비저항과 낮은 접착력은 여전히 극복해야할 문제로 남아있다. 본 연구에서는 Plasma enhanced chemical vapor deposition (PECVD) 법과 High power impulse magnetron sputtering (HiPIMS) 기법을 동시에 사용하여 Ti/TiC 하지층과 그 위에 Ti-DLC 막을 증착하였고, Ti 함량에 따른 DLC 박막의 특성변화를 살펴보았다. PVD/CVD 하이브리드 증착법에 의한 하지층은 DLC막과 기판사이의 밀착력을 향상시켰고, 기존 PECVD법과 비교하였을 때 하이브리드 증착법은 DLC 박막의 증착률을 크게 증가시켰다. DLC 박막에 소량의 Ti가 들어가면 C-C $sp^2$ 구조가 증가하여 전기적, 전기화학적 특성이 향상되었고, Ti의 함량이 일정 이상 증가하면 TiC의 영향을 받아 전기적, 전기화학적 특성이 나빠지는 것을 알 수 있었다. 본 연구에서는 DLC를 전극으로 활용하기 위해 전기적 및 전기화학적 특성을 향상시키는 연구에 집중하였지만, 산업에 활용하기 위해서 기계적 물성향상과 수명에 관한 추가적인 연구가 이루어 진다면 DLC 전극 분야 발전에 많은 기여를 할 수 있을 것이라 생각한다.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.183-191
• /
• 2017

In this study, surface morphology and mechanical property of TiN and DLC coated pedicle screw have been investigated by field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, vickers hardness test, axial gripping, and axial torsional gripping capacity test. From the EDS and XRD results, the composition and crystal structure of TiN and DLC coated surface were verified. The hardness value was increased by TIN and DLC coating, and the DLC coating surface has the highest value. The gripping capacity also showed higher value for TiN and DLC coated specimen than that of non-coated (Ti alloy) surface. The surface morphology of gripping tested specimen showed rougher scratched surface from Ti alloy than TiN and DLC coated layer.

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1357-1360
• /
• 2020

The low adherence of diamond-like carbon (DLC) films on titanium (Ti) alloys can be improved by using interlayer coatings. In this study, DLC (a-C:H) films were deposited using radio-frequency plasma-enhanced chemical vapor deposition (rf-PECVD), and a TiCN interlayer was applied between the extra low interstitial (ELI) grade of Ti-6Al-4V alloy and a-C:H film. The characteristics of the a-C:H-coated Ti-6Al-4V ELI alloy were investigated using field emission scanning electron microscopy, Vickers hardness, and scratch and wear tests. The DLC (a-C:H) films deposited by rf-PECVD had a thickness of 1.7 ㎛, and the TiCN interlayer had a thickness of 1.1 ㎛. Vickers hardness of the DLC (a-C:H) films were increased as a result of the influence of the TiCN interlayer. The resulting friction coefficient of the a-C:H-coated Ti-6Al-4V with the TiCN interlayer had an extremely low value of 0.07.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.368-376
• /
• 2023

Dental Ni-Ti files must ensure stability and resistance to fatigue fracture. DLC and ta-C were coated to remove defects on the surface and ensure stability, and the surface characteristics were investigated. When coated with DLC, it was black, and in case of ta-C coating, it was blue-black. Scratches, which are defects caused by mechanical processing, were formed on the surface of the un-coated Ni-Ti file from the end of the file along the direction of processing, with the Pro-file appearing in the vertical direction and the K-file appearing in the file direction. Scratches were reduced on the coated surface, and the surface roughness was greatly reduced after coating compared to before coating. The un-coated Ni-Ti file had the lowest hardness, the DLC-coated file had the highest hardness, and ta-C showed relatively high hardness. The elastic modulus of the DLC coating film was high, and the ta-C elastic modulus was low. The adhesion of the DLC coating film tended to be higher than that of ta-C, and the wear loss amount of DLC coating of taC was lower. The corrosion potential of the ta-C coating increased significantly, and the corrosion current density decreased.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.77-83
• /
• 2022

A high-hardness tool material is required to reduce extreme abrasive wear when drilling carbon fiber reinforced plastic (CFRP). Single-crystal diamond is the hardest material in the world, but it is very expensive to be used as a cutting tool. Polycrystalline diamond (PCD) is a diamond grit fused at a high temperature and pressure, and diamond-like carbon (DLC) is an amorphous carbon with high hardness. This study compares DLC coatings and PCD inserts to conventional TiAlN-coated tungsten carbide drills. In fiberglass and carbon fiber reinforced polymer drilling, the tool wear of DLC-coated carbide was approximately half that of TiAlN-coated tools, and slight tool wear occurred in the case of PCD insert end drills.

• Corrosion Science and Technology
• /
• 제6권1호
• /
• pp.18-23
• /
• 2007

DLC coatings have been deposited onto substrate of STS 316L and Ti alloy using r.f. PACVD (plasma-assisted chemical vapor deposition) with a mixture of $C_{6}H_{6}$ and $SiH_{4}$ as the process gases. Corrosion performance of DLC coatings was investigated by electrochemical techniques (potentiodynamic polarization test and electrochemical impedance spectroscopy) and surface analysis (scanning electron microscopy). The electrolyte used in this test was a 0.89% NaCl solution of pH 7.4 at temperature $37^{\circ}C$. The porosity and protective efficiency of DLC coatings were obtained using potentiodynamic polarization test. Moreover, the delamination area and volume fraction of water uptake of DLC coatings as a function of immersion time were calculated using electrochemical impedance spectroscopy. This study provides the reliable and quantitative data for assessment of the effect of substrate on corrosion performance of Si-DLC coatings. The results showed that Si-DLC coating on Ti alloy could improve corrosion resistance more than that on STS 316L in the simulated body fluid environment. This could be attributed to the formation of a dense and low-porosity coating, which impedes the penetration of water and ions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.446-446
• /
• 2014

흑연(graphite)과 티타늄(titanum; Ti) 타겟이 양쪽에 부착되어 있는 비대칭 마그네트론 스퍼터링 장치를 이용하여 Ti이 도핑되어진 다이아몬드상 탄소박막(Ti doped Diamond-like carbon, DLC:Ti)을 증착하였다. 흑연과 티타늄 타겟의 파워는 고정하고 기판에 음의 DC 바이어스를 인가하여 DC 바이어스 변화에 따른 DLC:Ti 박막을 증착하였다. 증착되어진 박막의 음의 DC 바이어스의 변화에 따라 변화되어지는 경도와 마찰계수, 표면의 거칠기, 접촉각 등의 물리적 특성들을 분석하였으며, XPS와 라만등의 분석법을 이용하여 박막의 구조적 특성을 분석하였으며, 패시베이션 층을 위한 전기적 특성등을 평가하여 이들 특성들간에 관계를 고찰하였다.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• 전기학회논문지
• /
• 제67권10호
• /
• pp.1375-1381
• /
• 2018

In this paper, we studied coatings of the DLC thin film for improving loosening torque of dental implant screw. We used a filtered arc ion plating process which can realize the most dense DLC layer by coating the DLC thin film on the surface of the dental abutment screw. It showed both hardness comparable to diamond and low friction coefficient similar to graphite, and to improve the loosening phenomenon by increasing the screw tightening force Cr/CrN, Ti/TiN or Ti/TiN/Cr/CrN buffer layers were deposited for 5 to 10 minutes to improve the adhesion of the DLC thin film to the surface of the Ti (Gr.5), and then the DLC thin film was coated for about 15 minutes. As a result, the Cr/CrN buffer layer exhibited the highest hardness of 29.7 GPa, the adhesion of 18.62N on average, and a very low coefficient of friction of less than 0.2 as a whole. And we measured loosening torque after one million times with masticatory movement simulator. As a result, the values of the coated screw loosening torque were clearly higher than those of the uncoated screw. From this, it was found that the DLC coating was effective methods improving the loosening torque. In addition, it was confirmed that the cytotoxicity test and cell adhesion test showed high biocompatibility.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.956-960
• /
• 2004

Effects of ion implantation and deposition on the tribological properties of DLC film as a function of implanted energies and process times were investigated. TiC ions were implanted and deposited on the Si-wafer substrates followed by DLC coating using ion beam deposition method. In order to study tribological properties such as friction coefficient and behavior of DLC film on the modified surface as a function of implanted energies and process times, we used a ball-on-disc type apparatus in the atmospheric environment. From results of wear test, as the implanted energy was increased, the friction coefficient was more stable below 0.1.