• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.655-663
• /
• 2021

In this paper, DFT-Based channel estimation with channel response mirroring is proposed and analyzed. In General, pilot symbols for channel estimation in MIMO(Multi-Input Multi-Output) OFDM(Orthogonal Frequency-Division Multiplexing) Systems have a diamond shape in the time-frequency plane. An interpolation technique to estimate the channel response of sub-carriers between reference symbols is needed. Various interpolation techniques such as linear interpolation, low-pass filtering interpolation, cubic interpolation and DFT interpolation are employed to estimate the non-pilot sub-carriers. In this paper, we investigate the conventional DFT-based channel estimation for noise reduction and channel response interpolation. The conventional method has performance degradation by distortion called "edge effect" or "border effect". In order to mitigate the distortion, we propose an improved DFT-based channel estimation with channel response mirroring. This technique can efficiently mitigate the distortion caused by the DFT of channel response discontinuity. Simulation results show that the proposed method has better performance than the conventional DFT-based channel estimation in terms of MSE.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.556-561
• /
• 2022

Computational material science as an application of Density Functional Theory (DFT) to the discipline of material science has emerged and applied to the research and development of energy materials and electronic materials such as semiconductor. However, there are a few difficulties, such as generating input files for various types of materials in both the same calculating condition and appropriate parameters, which is essential in comparing results of DFT calculation in the right way. In this tutorial status report, we will introduce how to create crystal structures and to prepare input files automatically for the Vienna Ab initio Simulation Package (VASP) and Gaussian, the most popular DFT calculation programs. We anticipate this tutorial makes DFT calculation easier for the ones who are not experts on DFT programs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.55-65
• /
• 2004

In this paper, An efficient non-scan DFT method for datapaths described in RTL is proposed. The proposed non-scan DFT method improves testability of datapaths based on hierarchical testability analysis regardless to width of the datapath. It always guarantees higher fault efficiency and faster test pattern generation time with little hardware overhead than previous methods. The experimental result shows the superiority of the proposed method of test pattern generation time, application time, and area overhead compared to the scan method.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.48-53
• /
• 1999

This paper presents an analytic derivation of the erroneous effect when the sliding-DFT is implemented in a recursive way with the finite-bit approximation of the twiddle factors. The analysis result is obtained in a closed form equation of the noise-to-signal power ratio(NSR) employing the zero-mean white Gaussian signal as the target input of the DFT. The parameters of the wordlength used in representing the twiddle factors and the blocklength of the DFT appear in the NSR explicitly as its function variables. The derivation is based on the error dynamic equation which is derived from the recursive SDFT, and on the analytic exploration of the statistical characteristics of the approximation coefficients treating them as random variables of having spatial distributions. The analytically derived results are verified through the comparison with the data actually measured from the computer simulation experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.898-904
• /
• 2017

DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.29-32
• /
• 2000

본 논문에서는 미지의 반송파주파수를 가진 협대역 신호의 존재를 광대역에서 검출하는 문제를 고려하였다. DFT 전력 스펙트럼을 평균화하여 주파수 영역에서 Neyman-Pearson criterion을 사용하여 신호를 검출하는 방법을 사용하였다. 평균화된 DFT 스펙트럼의 통계적 특성과 검출 threshold 및 검출 확률을 분석하여 보았다.

• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.90-98
• /
• 1999

This study was conducted to select proper substrate and nutrient solution concentration for favorable growth and quality in common thyme (Thymus vulgaris L.). The growth of common thyme was better in deep flow culture (DFT) than in other substrate cultures. As the nutrient solution concentration rose, the ratio of dry matter increased, while the fresh weight and the number of lateral shoots decreased. The contents of total chlorophyll and vitamin C were higher in DFT than others. Ca, K, P were showed high contents in cocopeat, but Mg content was the highest at half-fold concentration in DFT. Common thyme showed low content of nitrate in DFT compared with that in other substrate culture. DFT was the most effective system for pronoting growth and quality of common thyme. The optimal concentration of nutrient solution in common thyme was half-fold(EC=1.2mS/cm) of herbs nutrient solution by European Vegetable R&D Center.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.775-782
• /
• 2014

The importance of including spin-orbit interactions for the correct description of structures and vibrational frequencies of haloiodomethanes is demonstrated by density functional theory calculations with spin-orbit relativistic effective core potentials (SO-DFT). The vibrational frequencies and the molecular geometries obtained by SO-DFT calculations do not match with the experimental results as well as for other cations without significant relativistic effects. In this sense, the present data can be considered as a guideline in the development of the relativistic quantum chemical methods. The influence of spin-orbit effects on the bending frequency of the cation could well be recognized by comparing the experimental and calculated results for $CH_2BrI$ and $CH_2ClI$ cations. Spin-orbit effects on the geometries and vibrational frequencies of $CH_2XI$ (X=F, Cl, Br, and I) neutral are negligible except that C-I bond lengths of haloiodomethane neutral is slightly increased by the inclusion of spin-orbit effects. The $^2A^{\prime}$ and $^2A^{{\prime}{\prime}}$ states were found in the cations of haloiodomethanes and mix due to the spin-orbit interactions and generate two $^2E_{1/2}$ fine-structure states. The geometries of $CH_2XI^+$ (X=F and Cl) from SO-DFT calculations are roughly in the middle of two cation geometries from DFT calculations since two cation states of $CH_2XI$ (X=F and Cl) from DFT calculations are energetically close enough to mix two cation states. The geometries of $CH_2XI^+$ (X=Br and I) from SO-DFT calculations are close to that of the most stable cation from DFT calculations since two cation states of $CH_2XI$(X=Br and I) from DFT calculations are energetically well separated near the fine-structure state minimum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.789-796
• /
• 2013

It is known that the detection of hopping signals without any information about hopping duration and hopping frequency is rather difficult. This paper considers the blind detection of hopping signal's information such as hopping duration and hopping frequency from the sampled wideband signals. In order to find hopping information from the wideband signals, multiple narrow-band filters are required in general, which leads to huge implementation complexity. Instead, this paper employs the polyphase DFT(discrete Fourier transform) filterbank to reduce the implementation complexity. This paper propose hopping signal detection algorithm from the polyphase DFT filterbank output. Specifically, based on the binary image processing, the proposed algorithm is developed to decrease the memory size and H/W complexity. The performance of the proposed algorithm is evaluated through the computer simulation and FPGA (field programmable gate array) implementation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.632-638
• /
• 2011

This paper presents on-chip Design-for-Testability (DFT) circuit for radio frequency System-on-Chip (SoC) applications. The proposed circuit measures functional specifications of RF integrated circuits such as input impedance, gain, noise figure, input voltage standing wave ratio (VSWRin) and output signal-to-noise ratio (SNRout) without any expensive external equipment. The RF DFT scheme is based on developed theoretical expressions that produce the actual RF device specifications by output DC voltages from the DFT chip. The proposed DFT showed deviation of less than 2% as compared to expensive external equipment measurement. It is expected that this circuit can save marginally failing chips in the production testing as well as in the RF system; hence, saving tremendous amount of revenue for unnecessary device replacements.