• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.73-78
• /
• 2008

Water resource can be examined using biological sensors. Algae has been one of the biological sensors used to evaluate and to monitor the water pollution. The monitoring system, however, has not been used to determine what kind of the toxicological substance is in the water. It needs additional expensive chemical test to figure out the cause of the water pollution. In this study, an endeavor is made to identify the toxicant in the water using the shape of the chlorophyll fluorescence induction curve(FIC) from algae using monitoring system. Fundamental curves are obtained from the experiments with specified amount of toxicant. Baysian method is utilized to determine the unknown toxicant in the water by comparing it with the fundamental curves. The results shows that the proposed method works fairly well.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.317-320
• /
• 2005

The LBS (Location-Based Services) are valuable information services combined the location of moving object with various contents such as map, POI (point of Interest), route and so on. The must general service of LBS is route determination service and its applicable parts are FMS (Fleet Management System), travel advisory system and mobile navigation system. The core function of route determination service is determination of optimal route from source to destination in various environments. The MODB (Moving Object Database) system, core part of LBS composition systems, is able to manage current or past location information of moving object and massive trajectory information stored in MODB is value-added data in CRM, ERP and data mining part. Also this past trajectory information can be helpful to determine optimal route. In this paper, we suggest methods to determine optimal route by querying past trajectory information in MODB system and verify the effectiveness of suggested method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.404-415
• /
• 2010

In this paper, using the TDR sensors, variation of soil water content changes were measured as TDR data. Then filtering technique was determined using Fourier transform. Determine the moisture content of soil and ground water level and tried to determine unsaturated zone. First, variation of water content changes were measured TDR data by indoor experiment. Then as a function of TDR data made for water content of soil. Next, through Acrylic indoor laboratory model experiments, changes in ground water levels and lateral penetration of the field conditions were reproduced in an indoor. Field applicability of the TDR sensor was demonstrated by analysis of this. TDR sensor was installed in the embankment, TDR data were measured by TDR sensor.

• Language and Information
• /
• v.15 no.1
• /
• pp.63-78
• /
• 2011

This study investigates the binding behavior of the Korean anaphor 'caki', which has been regarded thus far as a long-distance anaphor (LDA). Given that even local anaphors can be bound long-distance when they function as exempt anaphors in certain languages (Pollard and Sag 1992; Kim and Yoon 2009a, b), I investigated the binding behavior of LD-bound 'caki', in order to determine whether LD-bound 'caki' differs from LD-bound 'caki-casin' in the same contexts. In the experiment, subjects were required to rate the grammaticality of Korean sentences representing various types of LD binding of 'caki' and to determine whether the sloppy or the strict reading was more prominent in elliptical VPs containing the anaphor. The results are discussed with respect to the typology of LDAs proposed by Cole, Hermon and Huang (2001).

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.16 no.2
• /
• pp.93-97
• /
• 2010

Purpose: The first purpose of this study was to determine the effect of reciprocal inhibition that influence changes in pain when applied to patients with culf cramps. The second purpose of this study was to determine the effect of manual therapy on iliaosacral joint that influence changes number of occurrences when applied to patients with frequent nocturnal culf cramps. Methods: The first study using reciprocal inhibition techniques to 20 patients with calf cramps and saw the change in pain. The second study using manual therapy on iliaosacral joint to 2 patients with frequent nocturnal culf cramps and saw the change in number of occurrences during the week. Results: The pain and number of occurrences were significantly difference between pre-treatment and post treatment. Conclusion: Based on the results of this study, we found that reciprocal inhibition decreased pain and that manual therapy on iliaosacral joint decreased number of occurrences.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.4
• /
• pp.82-88
• /
• 2002

Copper bus-bar is made by drawing process and used in many part of industry. Ohen design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper it is analyzed to determine shrink fit value by shrink fit analysis program which is used with APDL/UIDL language in a commercial FEM package, ANSYS. The shrink fit analysis has been developed that enables optimal desist of the dies taking into account the elastic deflections. Elastic deflection is generated in shrink fitting the die inserts and that caused by the stresses generated using DEFORM software for drawing process analysis. This data can be processed as load input data fir a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.39-50
• /
• 1988

The warehousing of inventories is an enormous expense to industries worldwide, and yet there are few available that can be used to design rack storage systems while considering overall system costs. The primary objective of this paper is the development of an overall ware hous storage system costs model to aid a warehous planner in the design of automated warehouse systems. A simulation model and statistical estimation procedures are used to determine the maximum inventory levels accumulated in the receiving, storage, and shipping areas. The overall cost model is developed to determine the required total land, the initial investment fund, the number of pieces of handling equipment, and the storage rack configuration for the main storage area. A numerical example is then presented to demonstrate the application of the overall system cost model developed in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.68-71
• /
• 1998

Rectangular deep drawing process is widely used in sheet metal forming. But there are various defects such as earring, wrinkling, tearing, etc. In order to avoid the defects, an optimum blank shape is required. But it has not been generalized to determine the optimum blank shape because deep drawing processes are involved in complex process parameters. So, it is very necessary to do research systematically about determining the optimum blank shape of deep drawing process. In this study a rectangular cup drawing test has been carried out to determine the optimum blank shape for various stainless steel sheets. From the test, a new blank model, which has no earring, is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.343-346
• /
• 2004

In recent years, various forms of indentation testing have been increasingly used to determine the material properties of specimens. This technique, particularly the nano-indentation method , has been extended to the testing of coating systems in order to calculate the individual properties of the thin coatings and the substrates. However, the interpretation of the test data to achieve this is complex and continues to be a widely studied subject. Based on the finite element method of coated surfaces indented by a Berkovich diamond tip, this paper describes methods for combining FEM and experimental indentation testing to determine coating modulus and hardness independent of substrate effects. Using this proposed methodology, testing and FEM to measure coefficients of friction of sheet steel for outer panel were studied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.54-58
• /
• 1991

It is well known that metal cutting leaves a plastically deformed layer in the machined surface. This residual phenomenon affects in various forms the physical properties of machined components such as the fatigue strength, the dimensional instability, microcracks, and the stress corrosion cracking. These physical properties, so called surface integrity, are very important for designing highly stressed and critically loaded components. Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization process. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation Is to explore the effectiveness of the recrystallization technique in machining applications, and in particular, to find the effect of cutting parameters, i.e., depth of cut and rake angle on the plastic strains.