• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.2
• /
• pp.9-17
• /
• 2020

The ratio of the deterioration housing in rural area was 29.6%, but it was 18.3% in urban area based on a 2018 survey. In consideration of the point, this study aims to analyze the actual condition of indoor air quality in rural houses to provide basic data for improving the indoor air environment. It was investigated 15housings of Hongseong-gun, Chungchengnam-do. To investigate the correlation between indoor air quality and housing type, both the field survey of housing type and precision diagnosis of concentration of indoor air pollutants such as HCHO, TVOC, Fine dust(PM-10, PM-2.5), CO₂, Radon. The results of this study are as follows. First, according to the average value of each element of rural old housing, the construction year was distributed in 1939~2004, and 12households(80%) living in houses older than 30years have passed for about 46years. As for the housing area, more than 12houses(80%) of 60㎡ or more and 3 houses (20%) of less than 60㎡ were often living in relatively small-scale housing. Second, as a result of measuring indoor air pollutants in rural houses, substances exceeding the standard values were found in HCHO, TVOC, CO₂. Third, in the case of Fine dust and Radon, none of such factors were exceeded the standard. Fourth, there was no significant difference in indoor air quality depending on housing type in rural houses. This paper is expected to contribute to the regional development projects and effective implementation of rural policies.

• Economic and Environmental Geology
• /
• v.54 no.3
• /
• pp.311-330
• /
• 2021

The Sinseongri site contains at least eleven theropod trackways, three sauropod trackways, and one or more ornithopod walkways of dinosaur footprints. The host rock at the site is primarily siltstone and mudstone, but thermal alterations have metamorphosed it into hornfels. Except for micro cracks and exfoliations, joint systems in various directions appeared on the surface of the fossils site and showed a low share of all damage factors. The host rocks in the fossils site demonstrated relatively high physical properties as a result of ultrasonic velocity and were classified as stable. More than half of the fossils required reinforcement to control the progression of cracks if the type of conservation treatment was subdivided according to the damage type of dinosaur footprint fossils. The white paint used to visualize the footprints seems to deteriorate, allowing rock debris to spill out and causing damage to the fossil site, and alternative visualization schemes should be considered.

• Food Science of Animal Resources
• /
• v.25 no.2
• /
• pp.210-217
• /
• 2005

This study was designed to evaluate the quality comparison of emulsion-type sausages made from different Rhus verniciflua Stokes (RVS) sources. The pigs were fed a supplemented concentrate diet with a RVS supplement of $4\%$ feed for 5 weeks before slaughter. The RVS extract was prepared from 100g of RVS sawdust and 1L of distilled water for 48 hours. Emulsion-type sausages were made using lean meat or dietary RVS han1 lean $(51.07\%)$, ice water or RVS extract $(19.63\%)$, back fat $(26.60\%)$ and other additives $(2.70\%)$. The treated sausages were divided into non-dietary meat with water (T1, Control), dietary RVS meat with water (T2), non-dietary meat with RVS extract (T3), and dietary meat with RVS extract (T4). The crude fat was significantly lower (p<0.05) in dietary RVS meat-added sausages (T2, T4) than in control sausage (T1). The lightness ($L^{\ast}$) and redness ($a^{\ast}$) were significantly lower (p<0.05) in RVS extract-added sausages (T3, T4) during refrigerated storage. The $a^{\ast}$ value was higher (p<0.05) in T2 than in the other treatments. The VBN and TBARS values were significantly lower in RVS extract-added sausages (T3, T4) during refrigerated storage. The hardness, adhesiveness, gumminess, and chewiness were significantly lower (p<0.05) in T2 than in the other treatments. This results showed that feeding of RVS in diet and/or RVS extract had a significant impact on the quality of emulsion-type sausage. The RVS extract-added emulsion-type sausages (T3, T4) showed dark and reddish color although they were more effective in delaying the protein deterioration and lipid oxidation. Consequently, the sausage prepared from pigs fed $4\%$ RVS with water (T2) was more effective in increasing the $a^{\ast}$ value, textural properties, and delaying the protein deterioration, lipid oxidation than that without RVS in diet.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.136-149
• /
• 2011

Large portion of the domestic bridges are slab bridges reflecting the geographical characteristic of the country, where exists lots of inclines and small winding brooks. Many of the slab bridges are damaged and superannuated as they become obsolete. Deterioration is accelerated when the traffic density becomes large and heavy vehicles pass frequently. A strengthening method for deteriorated slab bridges was studied in this work. The examined net-type strengthening method uses both longitudinal and transverse prestressing for strengthening. In this way, the deflection at the center of the slab can be better controlled, and consequently, the slab is more efficiently strengthened. Three slab specimens were fabricated for the experimental test and subjected to three different loading conditions, and the load bearing capacities and deflections of slabs were examined. Flexural stiffness of slabs increased by 30.7~107.3%, and deflection of slabs decreased by 27.6~52.2% after net-type strengthening. The net-type prestressing is efficient to the strengthening for the center of a slab, and its efficiency is also valid under eccentric loadings. Since extra prestress forces can be added in the future, if necessary, the net-type strengthening system is advantagous for the maintenance and repair of slab bridges.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.3
• /
• pp.31-42
• /
• 2013

This study was carried out to systematically maintain and manage the trails by assessing the types of deterioration and naturalness of trails located in Mt. Toham, Mt. Nam, Mt. Danseok and in the Mt. Gumi district of the Gyeongju National Park. The route length of Mt. Toham was 2.7km, 2.3km of Mt. Nam, 1.0km of Mt. Danseok and 2.7km of Mt. Gumi district. The numbers of measuring points in Mt. Toham were 37 units, 29 units of Mt. Nam, 16 units of Mt. Danseok and 40 units of Mt. Gumi district. In characteristics of physical environments, Mt. Danseok was the widest and Mt. Gumi was the narrowest in the width of trail. In the bared width of trail, Mt. Danseok was the widest and Mt. Gumi was the narrowest. In depth of erosion, Mt. Danseok was the deepest and Mt. Gumi was the shallowest. Mt. Danseok was the steepest and Mt. Nam was the gentlest in the longitudinal slope. In the results of analysing the types of deterioration, Mt. Toham were 10 types, 14 types of Mt. Nam, 11 types of Mt. Danseok and 9 types of Mt. Gumi district. The times of appearance of deterioration types in Mt. Toham were 69 times, 87 times of Mt. Nam, 67 times of Mt. Danseok and 71 times of Mt. Gumi district. The most common type was the exposure of root in 4 districts of Gyeongju National Park. In the results of assessing the naturalness, Mt. Toham was 2.1 score(II degree), 2.6 score(II degree) of Mt. Nam, 2.9 score(III degree) of Mt. Danseok and 2.0 score(II degree) of Mt. Gumi district. The average naturalness was 2.4 score and II degree.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.35-45
• /
• 2006

Plants of Vitex negundo are known to develop numerous trichomes throughout their body, where certain trichome types have been believed to be one of the plausible structures for the unique scents. In the current study. structural aspects of the trichomes have been examined in leaves and stems of Vitex negundo using TEM and SEM. Trichome types as well as structural changes that occurred in certain trichomes during secretion have been mainly focused. Three type of glandular trichomes and two types of non-glandular trichomes were developed in the epidermis of young and mature Vitex negundo plants. The glandular trichomes included the peltate type (Type 1), the capitate type (Type 2), and degraded capitate type (Type 3), whereas the non-glandular warty trichomes contained the multicellular (Types 4) and unicellular type (Type 5). Type 1 and 2 consisted of head and stalk cells, but their number and size were different. One secretory cavity was formed from the four head cells in the former, but only two head cells were involved in the latter. The cytoplasmic density in the head cell was quite high and in particular, sER and Golgi bodies were well developed. At initiation of their development, the cuticle layer of the head cells separated from the outer tangential wall to form a secretory cavity. Subsequently the cavity expanded acropetally and a large number of secretory vesicles continuously produced from the head cells until they filled the entire cavity. The cavity contained materials that would be soon discharged into intercellular spaces and/or into the air. The cavity began to decrease the volume by contracting at initial secretion but degrade rapidly within short time. It has been suggested that the mode of secretion in V. negundo is probably the eccrine secretion, since no break or rupture of the cavity has been observed during examination. Contrastingly Type 3 exhibited deterioration of the head cell at early stage. Type 4 was about $110{\sim}190{\mu}m$ long, consisting of $2{\sim}3$ cells, and distributed more in the adaxial epidermis compared to the abaxial surface. However, $20{\sim}30{\mu}m$ long Type 5 was extremely dense in both epidermis. Among several trichome types, Type 1 and 2 probably play an important role in discharging unique aromatic scents in plants of V. negundo.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.126-138
• /
• 2012

Ultrasonic method is widely used for the evaluation of weathering index and of degree of deterioration because it is easily applicable $in$ $situ$. The basic idea of the method is that the ultrasonic velocity decreases as a rock is being weathered. Thus, the difference of ultrasonic velocities between fresh rock and weathered rock indicates the degree of weathering. In this method, the ultrasonic velocity of fresh rock is assumed to be 5,000 m/s. However, this assumption can cause significant errors in estimating weathering index, especially in case that those rocks of the same type have a wide range of ultrasonic velocities such as in Korea. Therefore, we obtained twenty rock specimens and sixty core samples commonly used for stone cultural heritages in Korea, and measured ultrasonic velocities. From the results, we found that the ultrasonic velocities of the same rock type, granite samples range from 3,118 to 5,380 m/s, and that the estimated weathering index can be highly biased if we use the fixed value of 5,000 m/s. We created a database (DB) by combining the measurement data and reported it. We also measured ultrasonic velocities by direct and indirect methods to quantify the calibration coefficient for each sampling site. We found that the calibration coefficients vary widely from site to site (1.31-1.76). Other factors, such as operator bias and temperature did not show any significant effect on errors in ultrasonic velocity measurements. Lastly, we applied our ultrasonic velocity DB and calibration coefficients to a stone cultural heritage, Bonghwang-ri Buddha statue. Our estimation of the weathering index was 0.3, 0.1 smaller than that by conventional method. The degree of deterioration was also different, "moderately weathered", while conventional method gave "highly weathered". Since other independent studies reported that the degree of deterioration of the Buddha statue was "moderately weathered", our estimation seems to be more accurate. Thus our method can help accurately evaluate the weathering index and the conservation planning for a stone cultural heritage.

• Journal of the Korean housing association
• /
• v.20 no.1
• /
• pp.83-90
• /
• 2009

The present study is a preliminary research improving the dwelling quality of apartment house as a kind of multi-family housing. The purpose of the study is to find out the actual state on characteristics of indoor noise including residents' living in apartment units. The method was field survey consisted of field measurements on equivalent noise level, observation on noise type, and interview on residents' responses. Field survey were carried out in 20 occupied apartment units from January to March 2007. The results are as follows. 1) Averages of indoor noise levels including residents' living noise were measured as $43.9{\sim}62.2\;dB(A)_{Leq5min}$, the average of each house except one was higher than the permissible level, 45 dB(A). 2) The noise types observed were mostly residents' living noise and classified into 'water hammer', 'living equipment noise', 'noise by family', 'hood noise', 'kitchen noise' in own unit, 'walking and talking noise in stairs and corridors', 'noise by neighborhood house', 'noise by the upper story' in building, and outdoor noise. 3) The residents showed slightly non-positive responses at 'noise by the upper story', 'noise by neighborhood house', 'water hammer', and 'noise by family'. Therefore, it is required to plan for preventing deterioration of the dwelling quality by residents' living noise in own unit as well as by neighborhood houses.

• Structural Engineering and Mechanics
• /
• v.18 no.4
• /
• pp.389-410
• /
• 2004

In this study, theoretical and experimental results are presented which were obtained during an investigation of the influence of the $P-{\Delta}$ effect that was caused by the simultaneous changing of the axial load P of the column and the lateral displacement ${\Delta}$ in the external beam-column joints. The increase or decrease of ${\Delta}$ was simultaneous with the increase or decrease of the axial compression load P and caused an additional influence on the aseismic mechanical properties of the joint. A total of 12 reinforced concrete exterior beam-column subassemblies were examined. A new model, which predicts the beam-column joint ultimate shear strength, was used in order to predict the seismic behaviour of beam-column joints subjected to earthquake-type loading plus variable axial load and $P-{\Delta}$ effect. Test data and analytical research demonstrated that axial load changes and $P-{\Delta}$ effect during an earthquake cause significant deterioration in the earthquake-resistance of these structural elements. It was demonstrated that inclined bars in the joint region were effective for reducing the unfavourable impact of the $P-{\Delta}$ effect and axial load changes in these structural elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.146-146
• /
• 2015

We report the enhanced performance of poly(N-vinylcarbozole) (PVK)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based quantum-dot light-emitting diodes by inserting the polyaniline:poly (p-styrenesulfonic acid) (PANI:PSS) interlayer. The QD-LED with PANI:PSS interlayer exhibited a higher luminance and luminous current efficiency than that without PANI:PSS. Ultraviolet photoelectron spectroscopy results exhibited different electronic energy alignments of QD-LEDs with/without the PANI:PSS interlayer. By inserting the PANI:PSS interlayer, the hole-injection barrier at the QD layer/PVK interface was reduced from 1.45 to 1.23 eV via the energy level down-shift of the PVK layer. The reduced barrier height alleviated the interface carrier charging responsible for the deterioration of the current and luminance efficiency. This suggests that the insertion of PANI:PSS interlayer in QD-LEDs contributed to (i) increase the p-type conductivity and (ii) reduce the hole barrier height of QDs/PVK, which are critical factors leading to improve the efficiency of QD-LEDs.