• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.771-776
• /
• 1999

RUSLE was applied to estimate annual soil loss from two small agricultural watersheds in Kangwon-do, Korea. GIS input parameters were prepared by using DEMs and soil maps prepared by the NGIS project and Rural Development Adminstration, respoctively. RUSLE parameters were prepared based on existing data and equations. Estimated annual soil loss was graphically presented to easily visualize the large soil loss area. Uplands and vineyards proved to be the two greatest sources for soil erosion. It was suggested to develop effective management practices to reduce the soil erosion from uplands and vineyards.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.337-343
• /
• 2004

Spatial information could be obtained from spaceborne high resolution optical and synthetic aperture radar(SAR) images. However, some satellite images do not provide physical sensor information instead, rational polynomial coefficients(RPC) are available. The objectives of this study are: (1) 3-dimensional ground coordinates were computed by applying rational function model(RFM) with the RPC for the stereo pair of Ikonos images and their accuracy was evaluated. (2) Interferometric SAR(InSAR) was applied to JERS-1 images to generate DEM and its accuracy was analysis. (3) Quality of the DEM generated automatically also analyzed for different types of terrain in the study site. The overall accuracy was evaluated by comparing with GPS surveying data. The height offset in the RPC was corrected by estimating bias. In consequence, the accuracy was improved. Accuracy of the DEMs generated from InSAR with different selection of GCP was analyzed. In case of the Ikonos images, the results show that the overall RMSE was 0.23327", 0.l1625" and 13.70m in latitude, longitude and height, respectively. The height accuracy was improved after correcting the height offset in the RPC. i.e., RMSE of the height was 1.02m. As for the SAR image, RMSE of the height was 10.50m with optimal selection of GCP. For the different terrain types, the RMSE of the height for urban, forest and flat area was 23.65m, 8.54m, 0.99m, respectively for Ikonos image while the corresponding RMSE was 13.82m, 18.34m, 10.88m, respectively lot SAR image.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.148-148
• /
• 2009

반도체 소자의 크기가 45 nm 이하로 감소함에 따라 최소 선폭에 따른 다층 배선 연결 구조가 요구되고 있다. 그러나 고집적화 구조는 기생 저항과 정전 용량에 의한 신호지연증가 및 혼선 전력 소모의 문제가 발생한다. 이런 문제를 해결하기 위한 방법 중의 하나는 저저항 배선연결물질과 층간 절연막으로 저유전 상수를 갖는 물질을 사용하는 것이다. 본 연구는 DEMS $(H-Si(CH_3)(OC_2H_5)_2)$ 전구체를 이용하여 저유전막을 증착할 때 사용되는 PECVD (plasma enhanced chemical vapor deposition) 장비를 국내 기술로 개발하고 개발된 장비로 저유전박막을 평가한 것에 관한 것이다. 본 연구에서 평가 및 박막 종확 시 사용한 장비는 MAHA hp 1 type ((주)아토)로서 양산용 PECVD 장비이다. 변수는 C-He의 유랑, 300 mm Si 웨이퍼와 shower head 사이의 거리, 증착 압력, 구동 전력이고, 증착된 저유전막의 두께, 두께의 균일성, 굴절률, 굴절률의 균일성를 평가하였다. 구동 전력이 500W 일 때, C-He의 유량과 진공의 크기를 감소시키면 박막의 두께가 감소하고 박막의 균일성은 증가하였다. C-He의 유량을 증가시키고 shower head 와 Si 웨이퍼 사이의 거리 및 구동 압력을 감소시키면 굴절률과 굴절률의 균일성이 모두 저하되었다. 구동 전력이 700W 일 때, 박막 두께의 경우, 구동 전력이 500W 일 때의 결과와 유사하지만, 박막의 균일성, 굴절률, 굴절률의 균일성은 모든 조건에서 저하되었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.63-69
• /
• 2005

Interferometric Synthetic Aperture Radar(InSAR) is a rapidly evolving technique. Spectacular results obtained in various fields such as the monitoring of earthquakes, volcanoes, land subsidence and glacier dynamics, as well as in the construction of Digital Elevation Models(DEMs) of the Earth's surface and the classification of different land types have demonstrated its strength. As InSAR is a remote sensing technique, it has various sources of errors due to the satellite positions and attitude, atmosphere, and others. Therefore, it is important to validate its accuracy, especially for the DEM derived from Satellite SAR images. In this study, Real Time Kinematic(RTK) GPS and Kinematic GPS positioning were chosen as tools for the validation of InSAR derived DEM. The results showed that Kinematic GPS positioning had greater coverage of test area in terms of the number of measurements than RTK GPS. But tracking the satellites near and/or under trees md transmitting data between reference and rover receivers are still pending tasks in GPS techniques.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.359-365
• /
• 2008

This paper focused on generation of more accurate DEM and analysis of accuracy. For this, we applied suitable sensor modeling technique for each satellite image and automatic pyramid matching using image pyramid was applied. Matching algorithm based on epipolarity and scene geometry also was applied for stereo matching. IKONOS, Quickbird, SPOT-5, Kompsat-2 were used for experiments. In particular, we applied orbit-attitude sensor modeling technique for Kompsat-2 and performed DEM generation successfully. All DEM generated show good quality. Assessment was carried out using USGS DTED and we also compared between DEM generated in this research and DEM generated from common software. All DEM had $9m{\sim}12m$ Mean Absolute Error and $13m{\sim}16m$ RMS Error. Experimental results show that the DEMs of good performance which is similar to or better than result of DEMs generated from common software.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.325-331
• /
• 2017

In this study, digital elevation models(DEM) of tidal flat, according to different times, was produced by means of the Drone and commercial software in order to measure seawater change during high tide at water-channel in the Hampyung Bay. To correct the produced DEMs of the tidal flat where is inaccessible to collect control points, the DEM matching method was applied by using the reference DEM, that is previously obtained, instead of the survey. After the ortho-image was made from the corrected DEM, the land cover classified image was produced. The changes of seawater amount according to the times were analyzed by using the classified images and DEMs. As a result, it was confirmed that the amount of water rapidly increased as the time passed during high tide.

• Genomics & Informatics
• /
• v.21 no.1
• /
• pp.8.1-8.19
• /
• 2023

Cancer of the stomach is the second most frequent cancer-related death worldwide. The survival rate of patients with gastric cancer (GC) remains fragile. There is a requirement to discover biomarkers for prognosis approaches. Helicobacter pylori in the stomach is closely associated with the progression of GC. We identified the genes associated with poor/favorable prognosis in H. pylori-induced GC. Multivariate statistical analysis was applied on the Gene Expression Omnibus (GEO) dataset GSE54397 to identify differentially expressed miRNAs (DEMs) in gastric tissues with H. pylori-induced cancer compared with the H. pylori-positive with non-cancerous tissue. A protein interaction map (PIM) was built and subjected to DEMs targets. The enriched pathways and biological processes within the PIM were identified based on substantial clusters. Thereafter, the most critical genes in the PIM were illustrated, and their prognostic impact in GC was investigated. Considering p-value less than 0.01 and |Log2 fold change| as >1, five microRNAs demonstrated significant changes among the two groups. Gene functional analysis revealed that the ubiquitination system, neddylation pathway, and ciliary process are primarily involved in H. pylori-induced GC. Survival analysis illustrated that the overexpression of DOCK4, GNAS, CTGF, TGF-b1, ESR1, SELE, TIMP3, SMARCE1, and TXNIP was associated with poor prognosis, while increased MRPS5 expression was related to a favorable prognosis in GC patients. DOCK4, GNAS, CTGF, TGF-b1, ESR1, SELE, TIMP3, SMARCE1, TXNIP, and MRPS5 may be considered prognostic biomarkers for H. pylori-induced GC. However, experimental validation is necessary in the future.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.83-84
• /
• 2014

For hydrologic applications, lake levels is very important. As a first step in developing a remote-sensing based approach, lake stage estimation using remote sensing was proposed with the SRTM data from February 2000, which was providing a one-time snapshot. After several steps using contouring, masking, and CED, it was found that iterative contour fitting to a lake outline provided the outstanding result with the operator's decision. If the lake size is large enough, a constant meter of the difference removal due to bias found by Bhang et al. (2007) might be useful for more accurate estimations for the methods. A lake-level snapshot using SRTM data could provide estimates within 0.5 m level of accuracy for large lakes (> $10km^2$) with contouring. Also, even if the processing algorithm is complex, the accuracy was reliable. Overall, we confirmed that this study would provide useful information to ameliorate the quality of the SAR-derived DEMs specifically for water areas and if more expanded, SAR images can fruit result in water monitoring.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.226-232
• /
• 2001

The ability to efficiently and robustly recover accurate 3D terrain models from sets of stereoscopic images is important to many civilian and military applications. To develop an effective and practical terrain modeling system, we propose a new multi-image stereo method which detect unreliable elevations in DEM(Digital Elevation Map), and fuse several DEMs from multiple sources into an accurate and reliable results. This paper focuses on two key factors for generating robust 3D terrain models: the ability to detect unreliable elevation estimates and the ability to fuse the reliable elevations into a single optimal terrain model. We apply the self-consistency methodology to reconstruct accurate DEM from multi-image and show the method is more effective than the conventional stereo image 3D reconstruction method. Using photo-realistic simulator, four synthetic image are generated from ground truth DEM and orthoimage to evaluate the accuracy of the proposed method quantitatively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.217-222
• /
• 2006

In this study, we performed three dimensional(3-D) modeling and simulation of terrain surfaces by using large scale aerial photographs. The objectives of this study are to use landscape analysis including 3-D database of built environments. The test area is selected around Olympic stadium located in Susung-gu, Daegu. A 1:5,000 scale of ortho-photo map is generated by photogrammetric procedures from 1:20,000 scale of aerial photographs, Digital Elevation Model (DEM) is also extracted from stereo aerial photographs or digital maps. The heights of buildings are determined using GPS control survey and aerial photographs in the test area, DEMs are extracted from the digital map. And then the two are combined three-dimensional changes of landscape views of buildings with terrain are simulated.