• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.77-86
• /
• 2014

As raster-based high quality and resolution spatial information has appeared, 1/1,000 digital map lost either its recognition or uses because of insufficient new modified and updated information. Therefore, this study analyzed the linkage between three-dimensional spatial information and 1/1,000 digital map, and also suggested a modification plan of 1/1,000 digital map, made by three-dimensional spatial information. In fact, some area of Incheon and Busan were presented with the modification plan of 1/1,000 digital map as three-dimensional trial models. These trials reflected possibilities of modification by qualitative and quantitative analysis of 1/1,000 digital map, using three-dimensional object model.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.61-69
• /
• 2002

The purpose of Electro-Optical Camera (EOC), the primary payload of KOMPSAT-1, is to collect high resolution visible imagery of the Earth including Korean Peninsula. EOC images will be distributed to the public or many user groups including government, public corporations, academic or research institutes. KARI will offer the online service to the users through internet. Some application, e.g., generation of Digital Elevation Model (DEM), needs a secondary data such as satellite ephemeris data, attitude data to process the EOC imagery. EOC imagery with these ancillary information will be distributed in a file of Hierarchical Data Format (HDF) file formal. HDF is a physical file format that allows storage of many different types of scientific data including images, multidimensional data arrays, record oriented data, and point data. By the lack of public domain softwares supporting HDF file format, many public users may not access EOC data without difficulty. The purpose of this research is to develop a browsing system of EOC data for the general users not only for scientists who are the main users of HDF. The system is PC-based and huts user-friendly interface.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.1
• /
• pp.63-76
• /
• 2017

This research was classified mountain areas with high ecological, environmental and resource value among the macro scaled terrain that can be checked at the space scale of less than 1:1,000,000 and analyzed the topographical characteristics. It has been confirmed that the mountains of the Korean peninsula belong to the groups IV, V, VI(classification by Kapos et al.(2000)) as a result of applying the quantitative standards for designation of mountain areas to the global mountain system. The area of mountains calculated using high resolution DEM is equivalent to 48% of the area of the Korean peninsula, and the result is quite different from the general idea of which 70% is the mountain area of the Korean peninsula. The mountain areas show the distribution of geomorphons, that is different from the plains and the hills and also, it shows the differences between the mountains of the groups IV~ VI classified according to the altitude. As a result of analyzing the relations among type pattern, slope, and relief, specific geomorphons are concentrated at $10^{\circ}$ and $20^{\circ}$ and it shows the possibility to classify the mountainous areas into two groups based on the result that the distribution of landform patterns are bimodal in the relation to the amount of relief.

• Journal of the Korean earth science society
• /
• v.41 no.2
• /
• pp.95-110
• /
• 2020

Comparisons between two different surface temperatures from high-resolution ECMWF ReAnalysis 5 (ERA5) and Automated Synoptic Observing System (ASOS) observations were performed to investigate the reliability of the new reanalysis data over South Korea. As ERA5 has been recently produced and provided to the public, it will be highly used in various research fields. The analysis period in this study is limited to 1999-2018 because regularly recorded hourly data have been provided for 61 ASOS stations since 1999. Topographic characteristics of the 61 ASOS locations are classified as inland, coastal, and mountain based on Digital Elevation Model (DEM) data. The spatial distributions of whole period time-averaged temperatures for ASOS and ERA5 were similar without significant differences in their values. Scatter plots between ASOS and ERA5 for three different periods of yearlong, summer, and winter confirmed the characteristics of seasonal variability, also shown in the time-series of monthly error probability density functions (PDFs). Statistical indices NMB, RMSE, R, and IOA were adopted to quantify the temperature differences, which showed no significant differences in all indices, as R and IOA were all close to 0.99. In particular, the daily mean temperature differences based on 1-hour-averaged temperature had a smaller error than the classical daily mean temperature differences, showing a higher correlation between the two data. To check if the complex topography inside one ERA5 grid cell is related to the temperature differences, the kurtosis and skewness values of 90-m DEM PDFs in a ERA5 grid cell were compared to the one-year period amplitude among those of the power spectrum in the time-series of monthly temperature error PDFs at each station, showing positive correlations. The results account for the topographic effect as one of the largest possible drivers of the difference between ASOS and ERA5.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.361-373
• /
• 2013

The monitoring of urban area, target detection and building reconstruction have been actively studied and investigated since high resolution X-band SAR images could be acquired by airborne and/or satellite SAR systems. This paper describes an efficient approach to reconstruct artificial structures (e.g. apartment, building and house) in urban area using high resolution X-band SAR images. Building footprint was first extracted from 1:25,000 digital topographic map and then a corner line of building was detected by an automatic detecting algorithm. With SAR amplitude images, an initial building height was calculated by the length of layover estimated using KS-test (Kolmogorov-Smirnov test) from the corner line. The interferometric SAR phases were simulated depending on SAR geometry and changable building heights ranging from -10 m to +10 m of the initial building height. With an interferogram from real SAR data set, the simulation results were compared using the method of the phase consistency. One of results can be finally defined as the reconstructed building height. The developed algorithm was applied to repeat-pass TerraSAR-X spotlight mode data set over an apartment complex in Daejeon city, Korea. The final building heights were validated against reference heights extracted from LiDAR DSM, with an RMSE (Root Mean Square Error) of about 1~2m.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.123-133
• /
• 2007

Thermal spatial representativities of meteorological stations over Korea have been investigated using land surface temperature (LST) based on MODerate resolution Imaging Spectroradiometer (MODIS) satellite observation. The linear regression method was used to estimate air temperatures from MODIS LST product. To compare MODIS LST with observed air temperatures at six meteorological stations, the mean values of MODIS LST with nine given window sizes were calculated. In this case, the position of centered pixel in each given window size is correspond to that of each meteorological station. We also applied $4^{\circ}C$ threshold for RMSE comparison, which is based on a analogous study on daily maximum air temperature model using satellite data. In this study, the results showed that each station has a different representativity; Deajeon $15km{\times}15km$, Chuncheon $11km{\times}11km$, Seoul $7km{\times}7km$, Deagu $5km{\times}5km$, Kwangju $3km{\times}3km$, and Busan $3km{\times}3km$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.83-96
• /
• 2017

This study presented a surface water quality modeling framework considering the spatial resolution of pollutant load estimation to better represent stream water quality characteristics in the Saemangeum watershed which has been focused on keeping its water resources sustainable after the Saemangeum embankment construction. The watershed delineated into 804 sub-watersheds in total based on the administrative districts, which were units for pollutant load estimation and counted as 739 in the watershed, Digital Elevation Model (DEM), and agricultural structures such as drainage canal. The established model consists of 7 Mangyung (MG) sub-models, 7 Dongjin (DJ) sub-models, and 3 Reclaimed sub-models, and the sub-models were simulated in a sequence of upstream to downstream based on its connectivity. The hydrologic calibration and validation of the model were conducted from 14 flow stations for the period of 2009 and 2013 using an automatic calibration scheme. The model performance to the hydrologic stations for calibration and validation showed that the Nash-Sutcliffe coefficient (NSE) ranged from 0.66 to 0.97, PBIAS were -31.0~16.5 %, and $R^2$ were from 0.75 to 0.98, respectively in a monthly time step and therefore, the model showed its hydrological applicability to the watershed. The water quality calibration and validation were conducted based on the 29 stations with the water quality constituents of DO, BOD, TN, and TP during the same period with the flow. The water quality model were manually calibrated, and generally showed an applicability by resulting reasonable variability and seasonality, although some exceptional simulation results were identified in some upstream stations under low-flow conditions. The spatial subdivision in the model framework were compared with previous studies to assess the consideration of administrative boundaries for watershed delineation, and this study outperformed in flow, but showed a similar level of model performance in water quality. The framework presented here can be applicable in a regional scale watershed as well as in a need of fine-resolution simulation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.363-368
• /
• 2003

We have successfully developed a more effective algorithm to extract the lineament in the area covered by wide alluvial deposits characterized by a relatively narrow range of brightness in the Landsat TM image, while the currently used algorithm is limited to the mountainous areas. In the new algorithm, flat areas mainly consisting of alluvial deposits were selected using the Local Enhancement from the Digital Elevation Model (DEM). The aspect values were obtained by 3${\times}$3 moving windowing of Zevenbergen & Thorno's Method, and then the slopes of the study area were determined using the aspect values. After the lineament factors in the alluvial deposits were revealed by comparing the threshold values, the first rank lineament under the alluvial deposits were extracted using the Hough transform In order to extract the final lineament, the lowest points under the alluvial deposits in a given topographic section perpendicular to the first rank lineament were determined through the spline interpolation, and then the final lineament were chosen through Hough transform using the lowest points. The algorithm developed in this study enables us to observe a clearer lineament in the areas covered by much larger alluvial deposits compared with the results extracted using the conventional existing algorithm. There exists, however, some differences between the first rank lineament, obtained using the aspect and the slope, and the final lineament. This study shows that the new algorithm more effectively extracts the lineament in the area covered with wide alluvlal deposits than in the areas of converging slope, areas with narrow alluvial deposits or valleys.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.205-212
• /
• 2015

We have verified applicability of UAV(Unmanned Aerial Vehicle) photogrammetry to a mining engineering. The test mine is a smectite mine located at Gyeongju city in Gyeongnam province, Koera. 448 photos over area of $600m{\times}380m$ were taken with overlapped manner using Cannon Mark VI equipped to multicopter DJI S1000, which were processed with AgiSoft Photoscan software to generate orthophoto and DEM model of the study area. photogrammetry data with 10 cm resolution were generated using 6 ground control positions, which were exported to the 3D geological modeling software to make a topographic surface object. Monitoring of amount of ore production and landsliding could be done with less than 1 hours photographing as well as low cost. A direct link between UAV photogrammetry and 3D geological modeling technology might increase productivity of a mine due to appling the topographical surface change immediately according to the mining operation.