• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.453-456
• /
• 1998

The electrical properties of $Si_{1-x}Ge_{x}$ samples have been investigated. The sample structures were grown by MBE (molecular geam epitaxy) with Ge mole-fraction of x=0.0, x=0.05, x=0.1, and x=0.2. To examine the influence of the thermal processing, the $O_{2}$ and N$_{2}$ process were performed at 800[.deg. C] and 900[.deg. C], respectively. After this thermal process, hall measurements have been done over a wide range of the ambient temperature between 320[.deg. K] and 10[.deg. K] to find the temperature dependence using the comparessed-He gas system. The Ge-rich layer has been formed at the $SiO_{2}$/SiGe interface and it has an effect on the hall mobility. And it has been found that hall mobility was increased by the $N_{2}$ annealing process comparing with dry oxidation process at both 800[.deg.C] and900[.deg. C].

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.620-626
• /
• 1988

GaAs solar cells may be the most attractive and efficient power source of a satellite. GaAs is more radiation tolerant and less temperature sensitive than widely used silicon. $Al_{x}$ Ga$_{1-x}$ As/GaAs solar cells have been designed and fabricated by Liquid Phase Epitaxial method. GaAs solar cells, of which structure is about 0.2 .mu.m p$^{+}$ - window layer, 0.6-1.O .mu.m Ge-doped p-layer. 3.mu.m n-GaAs layer and n$^{+}$ - buffer layer, have been characterized as a function of operating temperature from 25 .deg.C to 130 .deg.C. Open circuit voltage decreases linearly with increasing temperature by 1.4-1.51 mV/ .deg.C while degradation of silicon solar cells is about 2.2-2.5 mV/ .deg.C, short circuit current does not increase much with increasing temperature. Relative efficiency decreases with increasing of temperature by about 0.21-0.29 %/ .deg.C. Efficiency degradation of silicon solar cells with temperature is known to be about 0.5%/ .deg.C and our results show GaAs solar cells may be an excellent candidate for concentrated solar cells.ells.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.101-105
• /
• 1992

Machined graphite/epoxy composite surfaces were studied by using SEM(Scanning Electron Microscopy). surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and laminate composite surface. The surface roughness and profile are found to be highly dependent on the fiber layup direction and the measurement direction. Machined unidirectional and 0.deg. 45 .deg. 90 .deg. plies in laminate composite surface profiles are found to be Gaussian in the direction of machining. Since there exist bare fibers without matrix smearing in 0 .deg. ply, higher surface roughness values were found in this orientation. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters Ra without Dy (maximum Damage Depth) region and Dy are better descriptors of the machined laminate composite surface than commonly used roughness parameters Ra and Ra. The characteristics of surface profiles in laminate composite are well represented in CHD (Cumulative Height Distribution) plot and PPD (Percentage Probability Density) plot. Also, the power spectral density function is shown to be capable of identifying the wavelength distribution of the machining damage.

• 오토저널
• /
• 제14권4호
• /
• pp.97-103
• /
• 1992

An experimental investigation has been carried out to determine the effect of tempering temperature on the fatigue crack propagation behavior and mechanical properties using the quenched and tempered STS420 martensitic stainless steel. Heat treatments of tempering for two hours at the five different temperatures of 150.deg.C, 300.deg.C, 450.deg.C, 600.deg.C and 700.deg.C have been performed on the martensite obtained by air cooling the specimens austenitized for one hour at 1010.deg.C. Tensile strength, yield strength, hardness, .DELTA.K$_{th}$, C and m values of differently tempered specimens have been investigated by tensile, hardness and fatigue tests.s.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.734-746
• /
• 1990

본 연구에서는 문등이 제안한 방법에 의하여 직사각형 단면의 180˚곡관유동 에서 속도분포와 난류성분을 측정하여 단면의 종횡비 변화에 따른 유동특성과 난류특 성의 변화를 고찰하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.61-67
• /
• 1997

We have studied dielectric properties of sol-gel derived tantalum oxide thin films as the insulators. As the sample is annealed from 300.deg. C to 700.deg. C, it is found amorphous below 600.deg. C and crystalline over it. Dielectric constant is maximum(18.6) when Ta$_{2}$O$_{5}$ film was annealed at 400.deg. C. It is found that dielectric strength in Ta$_{2}$O$_{5}$ film annealed at 400.deg. C (1.5MV/cm) increases and then decreases over annealed at 500.deg. C. This phenomenon was attributed to pinhole effect and crystallization. The de conduction properties can be interpreted by Poole-Frenkel effect.ect.

• E2M - 전기 전자와 첨단 소재
• /
• 제3권3호
• /
• pp.215-223
• /
• 1990

Y-Ba-Cu-O계 고온 초전도체를 소결, 소결+HIP encapsulation방법으로 각각 제작하였다. 소결은 900.deg.C~960.deg.C에서 하였으며 소결시편의 일부는 HIP처리 하였는데 이때 HIP조건은 150MPa Ar압력에서 800.deg.C, 30min이었다. HIP시편의 상대밀도는 90%~93%의 밀도를 갖는 소결시편보다 5%~8% 증가하였다. 열처리 조건에 따른 x-ray 회절분석은 사방정-정방정 상변태를 보여주었다. 임계온도(Tc)는 91.deg.k 에서 전기비정항이 급격히 감소하기 시작하여 89.deg.k에서 완전히 0이 되었으며 전이폭은 3.deg.k내로 매우 좁았다. 임계전류밀도(Jc)는 소결시편의 경우 전형적인 ~159A/$cm^{2}$의 값을 보였으나 HIP처리 후 ~89A/$cm^{2}$로 감소했기 때문이라 생각하였다. 경도와 인성은 각각 38GPa과 2.9MPam$^{1}$2/로 증가하였다.

• Parasites, Hosts and Diseases
• /
• 제45권4호
• /
• pp.283-285
• /
• 2007

To examine the expressed gene profile during encystation of Acanthamoeba castellanii Castellani, we used differentially expressed gene (DGE) screening by RT-PCR with 20 sets of random primers. From this analysis, we found that approximately 16 genes showed up regulation during encystation. We chose 6 genes, which had relatively higher expression levels, for further investigation. Based on homology search in database, DEG2 showed 55% of similarity with xylose isomerase, DEG9 showed 37% of similarity with Na P-type ATPase, and DEG14 showed 77% of similarity with subtilisin-like serine proteinase. DEG3 and DEG26 were identified as hypothetical proteins and DEG25 exhibited no significant similarity to any known protein. Encystation of Acanthamoeba has been suggested to be a process to resist adverse environmental or nutritional conditions. Further characterization studies of these genes may provide us with more information on the encystation mechanism of Acanthamoeba.

• 대한수학회보
• /
• 제61권1호
• /
• pp.229-246
• /
• 2024

We consider the delay differential equations $$b(z)w(z+1)+c(z)w(z-1)+a(z)\frac{w'(z)}{w^k(z)}=\frac{P(z, w(z))}{Q(z, w(z))}$$, where k ∈ {1, 2}, a(z), b(z) ≢ 0, c(z) ≢ 0 are rational functions, and P(z, w(z)) and Q(z, w(z)) are polynomials in w(z) with rational coefficients satisfying certain natural conditions regarding their roots. It is shown that if this equation has a non-rational meromorphic solution w with hyper-order ρ2(w) < 1, then either deg_w(P) = deg_w(Q) + 1 ≤ 3 or max{deg_w(P), deg_w(Q)} ≤ 1. In addition, it is shown that in the case max{deg_w(P), deg_w(Q)} = 0 the equations above can have such a solution, with an additional zero density requirement, only if the coefficients of the equation satisfy certain strict conditions.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.414-420
• /
• 1985

본 연구에서 상변화 물질은 얼음과 물을 택하였으며, 시편의 기하학적 형상은 원동형 얼음봉을 사용하였고 온도가 일정한 물속에 수평으로 잠겨진 상태에서 얼음봉 이 융해되는 현상을 가시화하고 이를 관찰하였다. 시편주위에 발생하는 자연대류현 상이 접면효과를 받지 않토록 하기 위하여 물탱크의 크기는 시편직경의 5배 이상으로 하였고 주위물의 온도는 정도가 최대인 4.deg. C 부근을 전후한 최저 2.5.deg. C에서 최고 15.deg. C 까지를 택하였다. 융해현상은 2차원 음영방법으로 가시화하고 사진으로 기록하였다. 융해되는 얼음봉의 형상은 Fourier수와 Stefan수의 곱으로 정의된 무차원시간(.zeta.)을 변수로 하여 나타내었다. 정해진 물의 온도에서 사진으로 기록된 결과를 콤퍼레이터 (comparator)를 이용하여 음영의 변화량을 구하여 각 원주각에서의 국부 Nusselt수와 평균 Nusselt수를 무차원시간에 대하여 구하였다.