• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2079_2080
• /
• 2009

MEMS 기술을 이용한 다양한 센서의 개발과정에서 신뢰성 확보는 매우 중요한 문제이며, 여러 가지 신뢰성 항목 가운데 낙하시험은 가장 기본이 되는 항목이다. 단시간 내에 낙하에 대한 내충격성을 확보하는 MEMS 센서를 개발하기 위해 본 논문에서는 FEA와 high-level 모델을 결합한 낙하시험 모의진단법을 제안하였다. 제안된 모의진단법을 통해 MEMS 소자에서의 최대응력과 응력분포, 최대변위, 그리고 낙하시의 과도응답과 오신호 등의 결과를 확보할 수 있으며 이들을 토대로 MEMS 소자에서의 취약부위를 파악하고 이를 보완할 수 있으며 낙하시의 오동작을 제거하도록 신호처리 회로 등을 보완할 수도 있을 것이며 이를 통해 단시간 내에 최소의 비용으로 내충격성을 확보한 MEMS 센서를 개발하는 것이 가능해질 것이다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1259-1264
• /
• 2007

Microstereolithography technology has potential capability for fabrication of 3D microstructures. It evolved from conventional SLA which is one of the RP processes. In a microstereolithography process, 3D microstructures can be easily fabricated by continuously stacking 2D layer which is photopolymerized using a liquid prepolymer. Combination between biocompatible/biodegradable photocurable prepolymer and 3D complex fabrication in microstereolithography makes broad application areas such as medical, pharmaceutic, and bio devices. In particular, a 3D microneedle for transdermal drug delivery and a scaffold for tissue engineering are fabricated using this technology. In this paper, the authors address development of microstereolithography system adapted to large surface and fabrication of various microstructures. In addition, to apply human body we suggest a biodegradable 3D microneedle and a scaffold using biodegradable photocurable prepolymer.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.295-297
• /
• 2017

A 27-year-old man was admitted with a penetrating injury at the mid-manubrium. Computed tomographic (CT) angiography showed a f illing def ect in the aortic arch. This was evaluated as a sign of injury and the patient underwent an emergency operation. No active bleeding or clot was f ound in the mediastinum during the operation. The laceration point was between the innominate and the left carotid artery posteriorly. The injury was approached using hypothermic circulatory arrest. Aortotomy and exploration showed a 2-cm-long full-thickness aortic injury with an overlying clot. A filling defect on angiography as a sign of a penetrating arch injury has never been reported previously, but was the main pathological finding on CT angiography in our case. The aorta is a high-pressure system and injuries to it should be treated aggressively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.480-484
• /
• 2008

DNP3.0은 산업 분야에서 SCADA(Supervisory Control And Data Aquisition) system의 개방형 프로토콜로 사용되어지고 있다. 본 논문에서는 개발하거나 개발된 Module들 사이에서 송 수신되는 DNP3.0 PDU를 분석할 수 있는 기능을 제공하는 DPA(DNP3.0 Protocol Analyzer) Module을 설계 및 구현하였다. 해당 Master Station에서 Request 메시지를 생성하여 Outstation으로 전송하고 Outstation에서 수신된 Request 메시지를 분석하여 Response 메시지를 생성하여 Response 한다. 또한 Master Station 과 Outstation에서 DNP3.0 프로토콜을 사용하여 통신하는 중간에서 송 수신하는 메시지를 Monitoring한다.

• YAKHAK HOEJI
• /
• v.38 no.6
• /
• pp.733-741
• /
• 1994

To detect anxiolytic activity from Sanguisorbae Radix we used various animal models of fear or anxiety that are sensitive to known anxiolytic drugs. While diazepam showed significant anxiolytic activities in all five animal models empolyed in this study, $5-HT_3$ antagonist ondansetron and ethylacetate fraction of Sanguisorbae Radix did show anti-anxiety effects in social interaction and two compartment exploration tests. Ethylacetate fraction of Sanguisorbae Radix and 5-HT related drugs like ondansetron and buspirone, however, seem to have merit over diazepam in terms of not causing drowsiness. Among ten subfractions obtained from ethylacetate fraction of Sanguisorbae Radix by silica gel chromatography, subfraction I showed higher anxiolytic activities than subfraction DEF in two animal models, social interaction and two compartment exploration tests. There is growing evidence for the role of 5-HT in the control of anxiety. We hope that new compound(s) will be found from the active fractions of Sanguisorbae Radix as a potential anxiolytic agent in the future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.96-97
• /
• 2008

Single crystal $AgGaSe_2$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at 420 $^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $AgGaSe_2$ source at 630 $^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $AgGaSe_2$ thin films measured with Hall effect by van def Pauw method are $9.24\times10^{16}cm^{-3}$ and 295 $cm^2/V{\cdot}s$ at 293 K, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.77-79
• /
• 2009

Nonlinear system fault detection and isolation of this paper is about the failure of unknown function approximation using neural network for fault detection and isolation techniques of induction motors were applied. observer-based fault signal residual value was used. Induction motor using the speed controller of the backstepping controller. Proposed fault detection and isolation to prove the performance of the simulation was applied to and the actual system.

• BMB Reports
• /
• v.40 no.6
• /
• pp.1050-1057
• /
• 2007

Peptide deformylase (PDF) is a metalloenzyme that removes the N-terminal formyl groups from newly synthesized proteins. It is essential for bacterial survival, and is therefore-considered as a potential target for antimicrobial chemotherapy. However, some bacteria including medically relevant pathogens possess two or more def-like genes. Here we have examined two PDFs from Bacillus cereus. The two share only 32% sequence identity and the crystal structures show overall similarity with PDF2 having a longer C-terminus. However, there are differences at the two active sites, and these differences appear to contribute to the activity difference seen between the two. BcPDF2 is found as a dimer in the crystal form with two additional actinonin bound at that interface.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.192-197
• /
• 2002

On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing. In this study, however in order to obtain various colors on silk fabrics with natural dyes, pre-mordanting and combination dyeing were carried out. Metal compounds containing alum, copper and iron were used for pre-mordants. Gardenia and Sappan wood were used as colorants for combination dyeing. In combination dyeing of Gardenia and Sappan wood, these two natural colorants showed good miscibility in dye bath. The various colors were obtained according to various metal compounds for pre-mordants and various mixing portion of Gardenia and Sappan wood.

• Fashion & Textile Research Journal
• /
• v.5 no.1
• /
• pp.82-88
• /
• 2003

This study was carried out to investigate combination dyeing of the cationized cotton with natural colorants extracted from Gardenia and Sappan wood extract using methanol. To improve dyeing properties of cotton with natural dye, cotton fabric was preheated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing, In this study, however in order to obtain various colors on cationized cotton fabrics with natural dyes, pre-mordanting and combination dyeing were carried out. The various colors were obtained according to various metal compounds for pre-mordants and various mixing portion of Gardenia and Sappan wood. Metal compounds containing alum, copper and iron were used for pre-mordants.