• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.39-52
• /
• 2016

Present study was performed to identify the effects of SNS WOM characteristics on attitude and purchase intention as perceived in restaurant participants and to confirm the moderating effect according to SNS receivers' characteristics on formulated model. Survey method was employed to consumers who are using SNS to find restaurant foods through convenience sampling method in Seoul area. A total of 250 surveys were distributed and 230 were used for analysis, after excluding missing and unusual data. The results from this study are as follows. First, vividness of SNS WOM characteristics had a greater effect on attitude of restaurant food than timeliness, but the consensus and neutrality of SNS WOM characteristics have no significant effect on attitude of restaurant food. Second, SNS receivers characteristics found to moderate the relationships between vividness and timeliness of SNS WOM characteristics and attitude. However, SNS receivers characteristics did not have a moderating role relationships between consensus and neutrality of SNS WOM characteristics and attitude. Third, attitude of restaurant food had a significant effect on purchase intention.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.27-37
• /
• 2010

As a pilot project of the National Spatial Data Infrastructure, "Quality upgrade of continuous cadastral map and Conversion of land use zoning map" is performed last year. In this study, for the following main project, its result is analyzed and problems occurred on the way carried out are extracted. The area change before and after conversion is compared, and relationship with the continuous cadastral map is analysed on the data of Ansung-Si. And than, systematic improvement method is suggested based on that problem.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.600-602
• /
• 1997

In this study, a hybrid neural net consisting of an Adaptive LVQ(ALVQ) algorithm and MLP is proposed to perform speaker identification task. ALVQ is a new learning procedure using adaptively feature vector sequence instead of only one feature vector in training codebooks initialized by LBG algorithm and the optimization criterion of this method is consistent with the speaker classification decision rule. ALVQ aims at providing a compressed, geometrically consistent data representation. It is fit to cover irregular data distributions and computes the distance of the input vector sequence from its nodes. On the other hand, MLP aim at a data representation to fit to discriminate patterns belonging to different classes. It has been shown that MLP nets can approximate Bayesian "optimal" classifiers with high precision, and their output values can be related a-posteriori class probabilities. The different characteristics of these neural models make it possible to devise hybrid neural net systems, consisting of classification modules based on these two different philosophies. The proposed method is compared with LBG algorithm, LVQ algorithm and MLP for performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.143-146
• /
• 2012

Enforcement of private information preservation law the infringement accident which is still caused by despite with private information outflow occurs. The private information outflow avoids finance and to become the fire tube. Analyzes the pattern of private information from search of private information and detection process and the research which it extracts and the research is necessary in about perfection elimination of the private information which is unnecessary. From the research which it sees it researched a pattern extraction research and a complete elimination method in about private information protection and it did the pattern extraction and a complete elimination experiment of private information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.213-216
• /
• 2013

Big data, the use of privacy has been increasing to the development of wireless network infrastructure or technology development and wired Internet. By the way, Enforcement of private data preservation law the infringement accident which is still caused by despite with private data outflow occurs. The private data outflow avoids finance and to become the fire tube. Analyzes the pattern of private data from search of private data and detection process and the research which it extracts and the research is necessary in about perfection elimination of the private data which is unnecessary. From the research which it sees it researched a pattern extraction research and a complete elimination method in about private data protection and it did the pattern extraction and a complete elimination experiment of private data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.111-114
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature ($T_{c,zero}$ : 90 K) and critical current density ($2354\;A/cm^2$). Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.123-126
• /
• 2003

The electrophoretic deposition method using the suspension solution with additives under the electric potential was applied for the fabrication of YBCO superconductor wire. This method was able to simplify the fabrication facilities, and produce an uniform and dense thick film. To improve the critical current density of deposited films, the additive PEGs(Poly Ethylene Glycole) with the molecular weight of 600, 1000 and 3400, were used as chemical binders for the suspension solution. The organic additive PEG showed better effects to the properties of YBCO superconductor wire. The PEG improved the adhesion between superconductor particles and suppressed the crack on the surface, which enhanced the surface uniformity and density of YBCO deposited film. It was found that acetone suspension solution showed better deposition properties than the others. The samples fabricated in the solution with the additive, 8 vol.% of 1% PEG(1000), showed the highest critical current density measured as $2300{\sim}2400\;Acm^2$ at 77 K, 0 T.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.693-699
• /
• 2011

In this study, a hydraulic system of a mini-loader is modeled, and the model is validated by comparing the simulation results to the experimental results. A load force acting on the structure of the mini-loader is obtained from the simulation of the hydraulic system, and the structural analysis via finite element method is performed using the obtained load force to evaluate the structural safety of the loader. For the mainframe that requires additional strengthening according to the structural analysis, the optimum design parameters are proposed using the design of experiments to improve strength without additional mass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.276-279
• /
• 2002

$Bi_{2}Sr_{2}CaCu_{2}O_{x}$ was prepared by the conventional method of solid state reaction and SHS method. The samples were annealed in different atmosphere in order to examine the influence of atmospheres on the carbon contents in the $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ compound. The lowest carbon content in $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ could be attended when the sample was annealed in $O_{2}$ at $800^{\circ}C$ for 100 hours. The $CO_{2}$ in air pollute the samples and increase the carbon content in the sintering process. The critical current density of the $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ samples will decrease with the increasing carbon contents in the samples. The impurity carbon will deposit in the grain boundary, which makes critical current density lower.

• Journal of Korea Port Economic Association
• /
• v.18 no.1
• /
• pp.43-60
• /
• 2002

Apart from the DEA method, the traditional measuring systems of container terminal productivities generally bring to light the partial productive efficiencies, because they evaluate only the productivity of each individual facility. However, these methods do not play roles of the reasonable productivity measures to compare and evaluate the efficiencies of terminals to meet the requirement of terminal customers like as shipping lines, shippers, etc. with the cutthroat competition in container handling market. As the suppliers of service, the terminals struggle to cope with the needs of buyers' markets due to the lack of suitable criteria to measure the efficiencies. Therefore, this paper uses the simulation approach to reveal which strategies enhance the productivities through the container terminal analysis. An additional intent of this paper is to build the active strategies to present what the experimental indexes like as norm-time exactness ratio, norm-time excess ratio, etc. compare between terminals to measure the total productivities for the age of global supply chain management. However, the experimental productivity indexes presented in this paper require a validation of the exact usefulness, by consideration from all angles in the future, and a development to more reasonable measuring method/indexes for the container terminal productivities.