• Title/Summary/Keyword: DDA3

Search Result 64, Processing Time 0.024 seconds

Development of a DDA+PGA-combined non-destructive active interrogation system in "Active-N"

  • Kazuyoshi Furutaka;Akira Ohzu;Yosuke Toh
    • Nuclear Engineering and Technology
    • /
    • v.55 no.11
    • /
    • pp.4002-4018
    • /
    • 2023
  • An integrated neutron interrogation system has been developed for non-destructive assay of highly-radioactive special nuclear materials, to accumulate knowledge of the method through developing and using it. The system combines a differential die-away (DDA) measurement system for the quantification of nuclear materials and a prompt gamma-ray analysis (PGA) system for the detection of neutron poisons which disturb the DDA measurements; a common D-T neutron generator is used. A special care has been taken for the selection of materials to reduce the background gamma rays produced by the interrogation neutrons. A series of measurements were performed to test the basic performance of the system. The results show that the DDA system can quantify plutonium of as small as 20 mg and it is not affected by intense neutron background up to 1.57 × 107 s-1 and gamma ray of 4.43 × 1010 s-1. The gamma-ray background counting rate at the PGA detector was reduced down to 3.9 × 103 s-1 even with the use of the D-T neutron generator. The test measurements show that the PGA system is capable of detecting 0.783 g of boron and about 86.8 g of gadolinium in 30 min.

Antimicrobial Finish of Nonwoven Fabric by Treatment with Chitosan (키토산을 이용한 부직포의 항미생물가공)

  • Younsook Shin;Kyunghye Min
    • Textile Coloration and Finishing
    • /
    • v.10 no.3
    • /
    • pp.50-56
    • /
    • 1998
  • Nonwoven fabric was treated with chitosan solution to impart antimicrobial activities by pad-dry method. Antimicrobial activity was measured by Shake Flask Method. Two chitosans of different molecular weight(Mw) with similar degree of deacetylation(DDA) were used : ca. 1,800(chitosan oligomer : DDA 84%) and 180,000(DDA 86%). Chitosan oligomer displayed high antimicrobial activity against P. vulgaris at 0.01%, S. aureus and E. coli at 0.05% treatment concentration, shelving above 90% of reduction rate. Chitosan of Mw 180,000 was effective against S. aureus, E. coil and P. vulgaris at 0.05% treatment concentration, showing almost 100% reduction rate. While chitosan of Mw 180,000 shelved reduction rate above 75% against K. pneumoniae and P. aeruginosa at 0.5% treatment concentration, chitosan oligomer was not effective against them. Fabrics become stiffer and less air permeable as treatment concentration increases. Liquid strike-through time of the sample treated with 0.5% chitosan oligomer solution (3.0 sec) was comparable with a hydrophilic finished sample commercially available(2.6 sec).

  • PDF

Learning in the WTO/DDA Negotiations?: An Experimental Study

  • Sung, Hankyoung
    • East Asian Economic Review
    • /
    • v.19 no.3
    • /
    • pp.243-273
    • /
    • 2015
  • The purpose of this paper is to identify learning in games in experimental economic settings, and apply their results to real multilateral trade negotiations, such as the Doha Development Agenda (DDA) in the World Trade Organizations (WTO). This paper argues that the structure of games including a veto player (Veto games) is similar to the WTO/DDA negotiations in that the players do not possess identical power. This paper's main contribution to the literature involves showing that learning about power is dominant over learning from simple repetition in Veto games. Additionally, this paper shows that players are concerned about how much they have gained in previous games in Veto games, although their memories generally do not last beyond the next game, and thus they tend to be selfish as they have less shares. Based on these results, there is a possibility to be more generous in the distribution of benefits by allowing players without veto power to retain special rights so that they would not be totally powerless. It also shows the necessity of having "respite" in the process of negotiations and policy options for choosing partners for winning coalitions.

Implementation of a High Speed Comparator for High Speed Automatic Test Equipment (고속 자동 테스트 장비용 비교기 구현)

  • Cho, In-Su;Lim, Shin-Il
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.19 no.3
    • /
    • pp.1-7
    • /
    • 2014
  • This paper describes the implementation of high speed comparator for the ATE (automatic test equipment) system. The comparator block is composed of continuous comparator, differential difference amplifier(DDA) and output stage. For the wide input dynamic range of 0V to 5V, and for the high speed operation (1~800MHz), high speed rail-to-rail amplifier is used in the first stage. And hysteresis circuits, pre-amp and latch are followed for high speed operation. To measure the difference of output signals between the two devices under test (DUTs), a DDA is applied because it can detect the differences of both common signals and differential signals. This comparator chip was implemented with $0.18{\mu}m$ BCDMOS process and can compare the signal difference of 5mV up to the frequency range of 800 MHz. The chip area of the comparator is $620{\mu}m{\times}830{\mu}m$.

Effect of organoclay on the dynamic properties of SBR compound reinforced with carbon black and silica (유기화 클레이의 첨가가 실리카 및 카본블랙를 함유한 SBR 복합체의 동적 특성에 미치는 영향)

  • Son, M.J.;Kim, W.
    • Elastomers and Composites
    • /
    • v.41 no.4
    • /
    • pp.260-267
    • /
    • 2006
  • SBR (styrene-butadiene rubber; 25 wt% of solid contents) nanocomposites reinforced with OLS(organically modified layered silicates) were manufactured via the latex method. Two types of OLS are prepared, i.e. dodecylamine (primary amine) modified montmorillonite (DA-MMT) and N, N-dimethyldodecylamine (tertiary amino) modified MMT (DDA-MMT). X-ray diffraction (XRD) and transmission electron microscopy (TEM) were employed to characterize the layer distance of OLS and the morphology of the nanocomposites. SBR nanocomposites reinforced with ternary phase filler (carbon black/silica/OLS) systems also manufactured. Dynamic mechanical thermal analysis (DMTA) was performed on these composites to determine the loss factor (tan $\delta$) over a range of temperature($-20^{\circ}C{\sim}80^{\circ}C$). The results showed that there was significant changes on the values or tan $\delta$ with the addition of small amount of the OLS. By increasing the contents of OLS, the values of tan $\delta$ at $0^{\circ}C$ increased but those of tan $\delta$ at $60^{\circ}C$ decreased with increasing OLS contents.