• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.475-478
• /
• 2004

The DCSU performs satellite payload data acquisition and storage functions before sending the data to the ground station. While imaging, the DCSU makes a file per each input channel and store into memory stack. For the successful imaging mission, proper DCSU mission parameters should be uploaded before the mission such as file name, file size, output channel for the download transmission and so on. This paper will describe the DCSU recording mechanism and some notices that might be helpful for the ground operators.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.821-826
• /
• 2002

The KOMPSAT-2 DCSU(the data compression & storage unit) performs the acquisition of image data from cameras, the compression with requested compression rate, the storage with specified file ID on the mission command and the distribution to the assigned DLS(Data Link System) channels per the mission and operation requirements. The worldwide observation using the MSC is able to be achieved by this DCSU's behavior. This paper presents the features of KOMPSAT-2 DCSU and provides proper ground operation concept after launch.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1102-1104
• /
• 2003

KOMPSAT-2 provides two different imaging methods, direct imaging and playback imaging. For playback imaging operation KOMPSAT-2 has a storage device called DCSU (Data Compression & Storage Unit) to hold images taken before. Compression function is necessary to save memory space and data transmission time to ground station. There are several parameters for compression like compression ratio. Due to DCSU architectural characteristics and KOMPSAT-2 operational limitations, there are some restrictions on selecting compression parameters. This paper will provide selecting guides on compression parameters.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.421-424
• /
• 2003

The KOMPSAT-II has a MSC(Multi-Spectral Camera) payload for earth observatory. The image data acquired during the pass over the Korean Peninsula can be sent to the ground station directly. But the image data out of the contact range should be stored temporally for later transmission. The KOMPSAT-II has a device for this purpose called the DCSU(Data Compression and Storage Unit) and the DCSU also performs compression functions for saving storage space and transmission time to send image data to the ground station. In this paper, we'd like to introduce the DCSU memory structures and operation.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.478-481
• /
• 2005

The PMU (Payload Management Unit) is the main subsystem for the management, control and power supply of the MSC (Multi-Spectral Camera) Payload operation. It is the most important function for the electro-optical camera system that performs the Non-Uniformity Correction (NUC) function of the raw imagery data, rearranges the data from the CCD (Charge Coupled Device) detector and output it to the Data Compression and Storage Unit (DCSU). The NUC board in PMU performs it. In this paper, the NUC board system is described in terms of the configuration and the function, the efficiency for non-uniformity correction, and the influence of the data compression upon the peculiar feature of the CCD pixel. The NUC board is an image-processing unit within the PMU that receives video data from the CEV (Camera Electronic Unit) boards via a hotlinkand performs non-uniformity corrections upon the pixels according to commands received from the SBC (Single Board Computer) in the PMU. The lossy compression in DCSU needs the NUC in on-orbit condition.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.378-381
• /
• 2003

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I ＆ Q) for data processing. The input of CCU is the output of DCSU (Data Compression ＆ Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.457-459
• /
• 2004

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I & Q) for data processing. The input of CCU is the output of DCSU (Data Compression & Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.432-435
• /
• 2004

MSC (Multi Spectral Camera) system is a remote sensing payload to obtain high resolution ground image. In this application, uniformity characteristic is important as well as GSD (Ground Resolved Distance) and SNR (Signal to Noise Ratio). MSC image chain is consisted of OM (Optical Module), CCD, Video processor, NUC and DCSU (Data Compression and Storage Unit). Each block makes and corrects MSC's nonuniformity response. This paper shows the cause of nonuniformity error and the correction scheme of MSC system from the electronic point of view.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.228-228
• /
• 2002

The DLS(Data Link System) is located in the PDTS(Payload Data Transmission Subsystem) of KOMPSAT-II, and its main function is to provide communication link with Ground Segment as a space segment. DLS receive the data of MSC, OBC from DCSU(Data Compression Storage Unit) and transmit to the Ground Station by X-Band RF link. DLS is consist of CCU(Channel Coding Unit), QTX(QPSK Transmitter, ASU(Antenna Switch Unit) CCU makes a packet for communication after several kind of data processing such like Ciphering, RS Coding. QTX transmit PDTS data by OQPSK. Modulation. ASU is the unit for reliability of antenna switching. So, DLS's function is consists of ciphering, RS coding, CCSDS packetizing, randomizing, modulation and switching to antenna. These DLS's functions are controlled by PMU(Payload Management Unit). All commands to DLS are sent by PMU and all telemetries of DLS are sent to the PMU. The PMU receives commands from OBC and sends telemetries to the OBC. The OBC communicates with Ground Station by S-Band RF link. This paper presents the on-orbit DLS operation concept through the ground segment.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.