• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.983-990
• /
• 2010

In this paper, we designed and implemented the MIMO antenna for LTE(Long Term Evolution), supposed to be a next generation communications network, DCS1800, DCS1900 and WCDMA. Using conventional monopole antenna with MD material results in good characteristics, miniaturization for LTE band and as well as broadbanding for DCS, WCDMA band. The performance of the proposed MIMO antenna shows VSWR < 2, under -10 dB of isolation and the gain is -1.66 ~ 1.33 dBi for LTE(Long Term Evolution), DCS1800, DCS1900 and WCDMA, which has omnidirectional radiation pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.503-510
• /
• 2007

This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.334-337
• /
• 2003

GSM / DCS1800 / PCS 대역에서 사용 가능한 9.5mm x 6.5mm 크기의 트리플 밴드 초소형 전압제어 발진기를 설계하였다. 설계된 트리플 밴드 VCO는 GSM(880∼915MHz) 대역에서 7±3dBm의 출력전력, DCS1800 (1720∼1785MHz) 대역에서 8±3dBm의 출력전력, PCS(1720∼1780MHz) 대역에서 0±3dBm의 출력전력의 특성을 보인다. 위상 잡음의 특성은 -110dBc @100KHz 이하의 만족할만한 성능을 보인다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1480-1493
• /
• 1999

본 논문에서는 DCS 1800 시스템에서 수신단의 성능을 개선시킬 수 있는 새로운 연판정 출력 등화 기법과 등화기 구조를 제안한다. 먼저 최적 연판정 출력 알고리듬(OSA : Optimum Soft-output Algorithm)의 계산량을 크게 줄이면서도 준최적의 성능을 유지하는 간략화된 최대 사후 확률 검파 기법을 제안한다. 그리고 부정확한 채널 추정값을 보정 할 수 있는 채널 추정 방식을 사용하고, 적응 채널추정 기법과 효율적으로 결합시킬 수 있는 새로운 등화기 구조를 노말 버스트의 특징을 이용하여 설계한다. 성능의 실험은 JTC 채널 모델을 이용하여 이루어졌으며, 본 논문에서 제안한 간략화된 최대 사후 확률 검파 연판정 출력 등화 알고리듬은 적은 계산량에도 불구하고, 기존의 최적 OSA의 비슷한 성능을 유지한다. 또한, 경판정 출력 비터비 등화 알고리듬에 비해서는 3~7dB의 성능 이득을 가지며, 간략화된 연판정 출력 비터비 등화 기법에 비해서는 0.5~3dB까지의 성능 이득을 나타낸다. 또한 채널의 변화 속도가 빠른 경우, 제안된 양방향 등화 구조는 기존의 순방향만을 이용하는 등화 구조에 비하여 커다란 성능 이득을 가진다. 즉, 기존의 순방향만을 이 淪求\ulcorner등화 구조를 사용한 등화기는 오차 성능의 정체 현상을 나타내지만, 양방향 등화 구조를 사용한 등화기는 오차 성능의 정체 현상을 보이지 않음을 확인할 수 있다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.19-28
• /
• 1998

This paper is concerned with the implementation of the equalization technique in a DCS 1800 system employing the soft-decision output Viterbi algorithm (SOVA), which makes the hardware complexity comparable to the hard decision MLSE and gives reliable performance. Also, the channel estimation technique with enhances the perfdormance of the soft-decision output equalizer is proposed, and the Viterbi decoder which operates effectively with the soft-decision output of the qualizer is implemented using the Very High Speed ICs Hardware Description Language (VHDL). From the simulation results, it is shown that the implemented Viterbi decoder operates effectively and the SOVA outperforms the hard-decision MLSE in terms of the frame erasure rate (FER) and bit error rate (BER).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.80-85
• /
• 2010

In this paper, a MIMO antenna is proposed for LTE/DCSl800/USPCSl900 handset applications. The proposed antenna is based on the IFA and its wide bandwidth is obtained by using a stagger tuning technique. To improve the isolation, a suspended line is connected to the shorting points in two antennas, and capacitors and inductors are added to the connected suspended line. Two identical antennas of which dimension is 2.8cc($40{\times}10{\times}7mm$) are mounted on the two end lines of the system ground plane($40{\times}60mm$). Analysis of the antenna performance and optimization is performed using CST Microwave Studio. The bandwidths are satisfied for LTE band class 13(746-787MHz), class 14(758-798MHz) and DCSl800/USPCSl900 band (1710-1990MHz). The isolations between two antennas are about -12dB for LTE band and -10dB for DCSl800/USPCSl900 band. And the radiation efficiency of each antenna is about for LTE band 33% and 45% for DCSl800/USPCSl900 band respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.572-575
• /
• 2007

In this paper, we proposed a internal antenna for Quad band for GSM/DCS/USPCS/WCDMA Handset. Antenna Structure is designed to PIFA type. Antenna planed two independence patterns to reduce the size for efficiency and used shoting pin and inverse seven_type slit. Also they miniaturized the antenna construction electronic length for duty. furthermore, they designed and producted the antena height for 5w and ground term for 40*80mm. It is because they have wondered the thickness of terminal. used of for reduce size efficiently. The radiation pattern characteristic of antenna is compared and analyzed E-plane and H-plane at 920MHz, 1800MHz.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1090-1095
• /
• 2003

In this paper, the modeling and design of high-Q multilayer passives and multilayer diplexer for GSM/DCS applications designed and fabricated using these passives have been investigated.. To miniaturize the system, configurations of inductor and capacitor have involved a square spiral structure and a vertically-interdigitated capacitor similar to 3D interdigital structure, respectively. Multilayer diplexers for GSM/DCS applications were designed and fabricated to apply high-Q multilayer passives to practical systems, which were designed by the proposed structural and equivalent circuit model. LPF for GSM band had the passband insertion loss of less than 0.55 dB, the return loss of more than 12 dB, and the isolation level of more than 26 dB by locating attenuation pole at 1800 MHz. HPF for DCS band had the passband insertion loss of less than 0.82 dB, the return loss of more than 11 dB, and the isolation level of more than 38 dB by locating attenuation pole at 930 MHz.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.158-165
• /
• 1999

This paper studies interconnection of DCS1800 and GSM900 dual-band networks. Two types of interconnection config-urations for GSM services, non-overlap and overlap, are described. We propose analytic and simulation models to investigate the ben-efit of the overlap configuration. Our results explain how the radio channel capacities, the inter-system handoff failure rate, the origi-nating call traffic ratio and the offered loads affect the system per-formance. This study indicates that with appropriate overlap con-figuration, the GSM dual-band network can significantly improve the quality of cellular service.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.881-887
• /
• 2011

In this paper, we proposed vertically structured radiator for increasing bandwidth and gain of mobile phone internal antenna. The proposed antenna has vertically structured radiator instead of planar structured radiator to improve the antenna characteristics for GSM850/900 and DCS1800/PCS1900 bands. The antenna improve bandwidth of low band with 28 % than planar structured radiator. and also, improve bandwidth of high band with 14 %, efficiency 31.80~86.36 %, average gain -4.956~-0.617 dBi on the GSM850/900 and DCS1800/PCS1900 bands. These results are good performance among the small antenna with vertically structured radiator for increasing bandwidth and gain.