• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.57-60
• /
• 2002

In generally, the guest-emitter doped system has been reported to give a bright electroluminescence(EL). The purpose of using doped system is to improve for increasing lifetime and efficiency, and tuning multicolor light. This indicates an enhanced electron-hole recombination rate in emitting layer. The purpose of this study is to obtain the high performance EL devices for flat panel display with red emission. We fabricated EL devices using the guest-host system. where DCM derivatives were taken as a dopant. The devices are fabricated in multilayer system with various concentration of the dopant (red light emitting dye). We measured the I-V characteristics and EL spectra from these devices. and we compared with photoluminescence(PL) quantum yield among the DCM derivatives. The emission mechanism of devices is participated in energy transfer. The energy transfer from these hosts to DCM generates luminescence spectra that vary from yellow red to red, depending on DCM derivatives. Absorption and emission spectra of organic materials composing the devices depend on the emission materials doped with the DCM derivatives. We demonstrated that the high EL efficiency can be achieved by doping host material with DCM derivatives and molecular steric structures

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.168-168
• /
• 2010

DCM derivatives were newly synthesized. The OLEDs with a DCM-A as an emitting layer was fabricated and analyzed their opto-electrical properties. The structures of OLEDs were I) ITO/DCM-A/Al, II) ITO/-NPD/DCM-A/LiF/Al, and III) ITO/-NPD/DCM-A/Alq3/LiF/Al. The EL peak of the DCM-A shows the red emission in the range of 700 nm. The structure I) shows that 1050 nW/cm2 at 510 mA/cm2. The structure II) shows that takes the most excellent luminance about 39,000 nW/cm2 at 290 mA/cm2. The EL structure ill shows luminance about 13,000 nW/cm2 at 6 mA/cm2.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.178-180
• /
• 2003

We performed semiempirical (AMl and ZINDO) and ab initio (HF and DFT) calculations, to investigate molecular structures and optical properties of DCM and its derivatives. DCM and its derivatives are used as a red fluorescent dopant of the organic electroluminescent host materials, $Alq_3$. We have studied the relationship between the molecular structure and the optical properties of these molecules for the improvement of EL efficiencies. Wavelength at the absorption maximum was found to be red-shifted when the molecule is substituted with both strong electron donating and withdrawing functional groups. A new red fluorescent dye was predicted by QSPR study based on calculations and experimental data.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3433-3436
• /
• 2012

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.320-323
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity and the dielectric constant. In the AFM images, we conclude that surface morphology of PU-DCM LB films is smooth and homogeneous and has optimal hydrophobicity and good stability, whereas PU-CN LB films give rougher surfaces with more excess material. In the I-V characteristics, the conductivity is different as to the polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.609-613
• /
• 2006

4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) derivatives were synthesized by Knoevenagel condensation. They are red-emitting materials for OLED (Organic Light-Emitting Diode) composed of electron donor of aminostyryl groups and electron acceptor of two cyano(nitrile)groups in a conjugated structure. The structural properties of reaction products were analyzed by FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visible and PL properties can be determined by exitation and emission spectra, respectively.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.458-460
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity, the dielectric constant and activation energy. In the surface morphologies, physicochemical, electrical properties of polyurethane derivatives LB films, the properties is different as to the Polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4419-4422
• /
• 2011

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.8
• /
• pp.371-375
• /
• 2001

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area (${\pi}$-A) isotherms. The surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy(AFM) and UV-vis spectroscopy, respectively. And, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity and the dielectric constant. In the surface morphologies, physicochemical and electrical properties of polyurethane derivatives LB films, the properties is different as to the polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.