• Archives of Reconstructive Microsurgery
• /
• v.21 no.1
• /
• pp.34-40
• /
• 2012

Prevention of acute rejection in composite tissue allotransplantation without continuous immunosuppression lacks reports in worldwide literature. Recently dendritic cells (DC) gained considerble attention as antigen presenting cells that are also capable of immunologic tolerance induction. This study assesses the effect of alloantigen-pulsed dendritic cells in induction of survival in a rat hindlimb allograft. We performed hindlimb allotransplantation between donor Sprague-Dawley and recipient Fischer344 rats. Recipient derived dendritic cells were harvested from rat whole blood and cultured with anti-inflammatory cytokine IL-10. Then donor-specific alloantigen pulsed dendritic cells were reinjected into subcutaneous tissue before limb transplantation. Groups: I) untreated (n=6), II) DC injected (n=6), III) Immunosuppressant (FK-506, 2 mg/Kg) injected (n=6), IV) DC and immunouppressant injected (n=6). Graft appearance challenges were assessed postoperatively. Observation of graft appearance, H-E staning, immunohistochemical (IHC) study, and confocal immunofluoreiscece were performed postoperatively. Donor antigen pulsed host dendritic cell combined with short-term immunosuppression showed minimal mononuclear cell infiltration, regulator T cell presence, and could prolong limb allograft survival.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.17-21
• /
• 2017

Recently, the Korea Enhanced Power system Simulator (KEPS) was upgraded with new processor cards and various peripheral devices. The purpose of the upgrade is for the large-scale AC/DC simulation studies for different purposes such as FACTS, PMU applications, and SPS. The need for such study is now growing in KEPCO network. Frequently, traditional ways of performing the necessary study had been found to be less adequate for guiding the key decisions in the company. Therefore, the growing needs, as well as the revealed inadequacy of the traditional system studies, had been attributing to the momentum for the upgrade project. This paper explains the details of the upgrade project. As an example of presenting the effectiveness of the upgraded RTDS system in KEPRI-KEPCO, a large-scale AC/DC real time simulation case which includes the entire Korean network and a planned MMC-HVDC system is introduced.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.25-32
• /
• 2006

LonWorks over IP(LonWorks-IP) virtual device network(VDN) is an integrated form of LonWorks device network and IP data network. In especially real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. The time delay in servo control on LonWorks-IP based VDN has highly stochastic nature. LonWorks-IP based VDN induced transmission delay deteriorates the performance and stability of the real-time distributed control system and can't give an effective preventive and predictive maintenance. In order to guarantee the stability and performance of the system, and give an effective preventive and predictive maintenance, LonWorks-IP based VDN induced time-varying uncertain time delay needs to be predicted and compensated. In this paper new Pill control scheme based on Smith predictor, disturbance observer and band pass filter is proposed and tested through computer simulation about position control of DC servo motor. It is shown that how can the proposed control scheme be designed to minimize the effects of uncertain varying time delay and model uncertainties. The validity of the proposed control scheme is compared and demonstrated with the comparison of internal model controllers(IMC) based on Smith predictor with and without disturbance observer.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.47-55
• /
• 1995

Minari(Oenanthe stolonifera DC.) lived in serious polluted water is able to remove chemical elements from batch system. This study attempted to compare the incorporation of cadmium and lead in batch system. Different concentrations of Cd(0.02 0.1 0.5 1.00 5.00 mg/l) and Pb(0.1 0.5 1.0 5.0 10.0 mg/l) were used. Toxic effects were obvious at Cd 1.00 mg/l and Pb 5.00 mg/l. The detrimental effects on minari were chlorosis of leaves and stunted roots and reduction in the number of lateral roots. There was reduction in growth rates exposed above Cd 1.00 mg/l and lead 5.0 mg/l. The minari capacities to remove Cd were 34.1-74.2% and Pb were 53.0~91.5%. The removal rates by minari in Cd and Pb solution were decreased with increased exposure concentration(in Cd r=0.97, in Pb r=0.88). The removal rates by minari in Cd and Pb solution were increased with increased growth rate(in Cd r=0.93 in Pb r=0.92). Recovery rates on minari are 67.3~95.2% in Cd water and 72.6~88.3% in Pb water. The rates are increased with increased growth rates and decreased initial concentrations.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.265-268
• /
• 1999

In this paper, a wideband MMIC distributed amplifier was designed using the fabricated PHEMT with the unit gate width of 80 ${\mu}{\textrm}{m}$ and 4 gate fingers at our Lab. S$_{21}$ gains are 7.1 ~ 10.0 ㏈. Input and output reflection coefficients obtained from the distributed amplifier in the frequency range of DC~25 ㎓ are lower then -8 ㏈. A chip size of the designed wideband MMIC distributed amplifier is 1.9 mm $\times$ 1.1 mm.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.137-143
• /
• 2013

This paper presents development of variable speed generation (VSG) system with energy saving function. The rubber tyred gantry crane (RTGC) requires the power from diesel-engine. Significant fuel savings by reducing the engine speed can be achieved, because all of operation modes except hoisting are required lower power than rated value of engine. When low speed operation output voltage of generator is decrease until acceptable range of motor driver inverters and auxiliary load supplier. According to power demand engine speed is varying from 20 to 60Hz, and voltage is varying between 210Vac and 480Vac. When idle mode or low power operation dc/dc converter operates by constant output voltage control and inverters dc site voltage is compensated by it. This paper proposed 3-phase interleaved boost converter which has the same structure as the commercially available 3-phase inverter and current sharing capability. 400kW interleaved converter is designed and a performance of converter is evaluated through several experiments with a RTGC system. Energy saving VSG system can cut down fuel consumption by 36% and 21.3% at idle and unidirectional load operations.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.75-81
• /
• 1997

The switching components to control the speed of dc motor, which perform vital fuction in a modern motor vehicle or a ship, are susceptibile to suffer damage or upset by switching transient. An equivalent circuit was derived, in this paper, to select an ideal component having immunity against the switching transient among varisotor, zenner diode, etc. Furthermore, we have carried out the optimal improved transient protection circuit design in the view of cost effectiveness, proper wave form of transient defined by the international regulations. The process and cause of the damages in the switching components were examined. Then, the immunity improvement of semiconductor switching components to control a dc motor has been achieved considering impedance condition accoring to the variation of the diverting transient current.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.706-710
• /
• 2007

Ti-containing amorphous carbon (a-C:Ti) films shows attractive mechanical properties such as low friction coefficient, good adhesion to various substrate and high wear resistance. The incorporation of titanium in a-C films is able to improve the electrical conductivity, friction coefficient and adhesion to various substrates. In this study, a-C:Ti films were depositied on Si wafer by closed-field unbalanced magnetron (CFUBM) sputtering system composed two targets of carbon and titanium. The tribological properties of a-C:Ti films were investigated with the increase of DC bias voltage from 0 V to - 200 V. The hardness and elastic modulus of films increase with the increase of DC bias voltage and the maximum hardness shows 21 GPa. Also, the coefficient of friction exhibites as low as 0.07 in the ambient. In the result, the a-C:Ti film obtained by CFUBM sputtering method improved the tribological properties with the increase of DC bias volatage.

• Food Science and Preservation
• /
• v.30 no.3
• /
• pp.395-404
• /
• 2023

Essential oil (EO) was extracted from the peel of Citrus hystrix DC. originating from Tinh Bien, An Giang province (Vietnam), using steam distillation. The study aimed to determine some physicochemical properties of Citrus hystrix peel EO (ChpEO), including the acid value (AV), saponification value (SV), ester value (EV), density, specific gravity, and freezing point. The chemical composition was also analyzed by gas chromatography-mass spectrometry (GC-MS). Compounds like β-pinene (30.19%), D-limonene (22.15%), and sabinene (21.37%), with antioxidant and antibacterial properties, had a relatively high content. The EO was also capable of inhibiting the growth of both Gram-positive and Gram-negative bacteria, including Pseudomonas aeruginosa (ATCC 27853), Staphylococcus aureus (ATCC 25923), Salmonella typhimurium (ATCC 13311), and Bacillus cereus (ATCC 11778) specifically.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.1-15
• /
• 1993

We made a pyramidal horn antenna system for 21cm cosmic radio wave. The antenna system has a rectangular waveguide with $TE_{10}$ mode and a copper probe to detect the electromagnetic wave in waveguide. The parameters of the probe are obtained by experiments using two waveguides. Pyramidal horn antenna is designed to get a gain of 20dB. The size of the aperture of this horn is $94cm{\times}74cm$. The beam width of half power is about $14.7^{\circ}$ for the frequency of 1.4GHz. The horn is made of aluminum plate with a thickness of 2mm. The signal from horn and waveguide is amplified in a receiver system and is converted into DC in the detecter. The intensity of the signal is recorded on a chart recorder. We observed the sun using this simple radio telescope and obtained the brightness temperature of $2.2{\times}10^5K$, which indicates that the sun is quiet at 21cm.