• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.37-44
• /
• 2010

Recently, urban retrofit and extension, development of new buildings and facilities, and construction of underground structures like subway tunnels in urban areas give rise to significance of site investigation at urban areas. However, ambient electric noises, traffic vibrations, embedded objects work as obstacles to high-quality and accuracy in site investigation at urban areas. In this paper, a new technique called the pseudo-DC resistivity survey (in brief, PDC-R) was proposed to minimize the adverse effect of ambient electrical noises in resistivity survey. PDC-R technique utilizes an AC current with frequency range of 0.1 to 1.0 Hz rather than DC current, which is used for conventional resistivity survey. The motivation of using low-frequency AC current is to avoid 60-Hz components or its multiples in the resistivity survey which ambient noises are mostly composed of. The implementation of PDC-R technique also included the parametric study on skin effect, frequency effect and current-level effect, which led to the determination of optimal values of frequency and current level for PDC-R survey. The reliability and feasibility of PDC-R technique was verified through field tests, accompanied by the comparison with DC resistivity survey and CapSASW tests.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.155-159
• /
• 1991

This paper is a study on the Inverse dynamics of a one-1ink flexible robot arm which is control led by the transiational base motion. The system is composed of the flexible arm, the mobil stage, a DC servomotor, and a computer. The arm base is shifted so that the tip follows a desired path function. The tip Rotten is measured by the laser displacement sensor. The governing equations are based on the Bernoullie-Euler beam theory and solved by applying the Laplace transform method and then the numerical inversion method to the resulted equations. Tip responses obtained both theoretically and experimentally are in good agreement with the desired trajectory, which shows that the scheme of inverse dynamics is effective for the open-loop endpoint positioning of the flexible am driven by the translation stage.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.198-200
• /
• 1986

In this paper, the optical modem for data link realization is designed with the advantages of optical fiber : large handwidth, no electromagnetic interference, high speed and long-haul communications. Biphase cording format is used for the sync, and async, transmissions. Modem interface conform to the CCITT V.24 standard for the compatibility with existing systems. 0/E and E/0 converters are designed using LED-APD pair for long wave length and LD-APD for short wave length, respectively. As a result, the system is capable of transmitting at any bps within dc to 200Kbps in async, and at 1200bps up to 57.6Kbps in sync. transmission.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.349-350
• /
• 2010

본 논문에서는 부스트 컨버터와 플라이백 컨버터가 통합된 단일(Single Stage) 역률 보상 회로의 2차측에 Voltage Doubler를 적용한 새로운 역률 보상회로를 제안한다. 제안하는 회로는 불연속 모드(DCM-DCM)로 동작하며, 스위치 전압 및 전류 스트레스를 저감하고 2차측 다이오드의 전압 스트레스를 저감시키는 특징이 있다. 120 V LED 구동 드라이버 사양의 실험을 통해 제안한 회로의 동작을 검증한다.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.55-66
• /
• 1999

The purpose of this study was to analyze the changes and characteristics of street fashion in Japan of the 1980s. The data were collected from the Mainichi Newspaper published in Japan from 1950 to 1990. The results were as follows: 1. After world war II, the street fashion had changed through the styles of the Panpan, Apres, Miyuki, Hippie & Hooten, Bikers in Japan. 2. The 1980s was characterized as an era of post industrial society and the appearance of Shinjinrui which means new human. In street fashion, these changes led to greater focus on unique style in Japan. In the 1980s, the street fashion had developed within four styles : traditional casual wear style, American sports wear style, performance.oriented style, and Japanese DC brand style in Japan.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.343-350
• /
• 2003

The best Ppy weight ratio was 7 wt% and the optimal electrode composition ratio was 78 : 17 : 5 wt.% of (MSP-20 : BP-20 =1 : 1), (Super P : Ppy =10 : 7) and P(VdF-co-HFP). Implantation of Ppy as the conducting agents have led to superior electrochemical characteristics because of the low of internal resistance and faradaic capacitance. The result of unit cell with Ppy 7 wt% were as follows: 28.02 Fig of specific capacitance, 1.34 Ω of DC-ESR and 0.36 Ω of AC-ESR. Unit cell showed a good stability up to 200 charge-discharge cycles, retaining 82% of their original capacity at 200 cycles. From the analysis of impedance, the electrodes with Ppy 7 wt% showed low ESR, low charge transfer resistance and quick reaction rate. It was inferred that quick charge-discharge was possible. As compared with the specific capacitance (rectangular shape) of CV, it was also concluded that the specific capacitance originated from thecompound phenomena of the faradaic capacitance by oxidation and reduction of Ppy and the non-faradaic capacitance by adsorption-desorption of activated carbon.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.196-196
• /
• 2013

가시광 영역에서의 높은 투과도와 낮은 전기 비저항을 갖는 ITO (Indium Tin Oxide) 박막은 현재 Display, Solar Cell, LED, Smart Phone 등 최첨단 IT산업에서 가장 많이 사용되고 있는 투명전극소재이다. IBD (Ion Beam Deposition)방법은 박막의 증착 방법 중 Plasma에서 독립적으로 이온만을 빔의 형태로 조사하여 박막을 증착하는 방법으로 기존 RF 또는 DC 스퍼터방법에 비해서 상대적으로 높은 진공도(low 10E-04 torr)와 비교적 높은 스퍼터 된 입자의 에너지를 가지는 등의 장점으로 증착 된 박막의 밀도, 거칠기가 향상되고 상대적으로 적은 결함을 가지는 박막의 제작에 사용되고 있는 기술이다. (주)인포비온에서는 IBD 기술과 더불어 표면만을 선택적으로 가열할 수 있는 EBA Technology를 사용하여 박막에 Energy를 전달하고, 이를 바탕으로 ITO 박막의 전기적, 광학적, 구조적인 특성의 변화를 관찰 연구했다 [1]. 본 연구에서는 기존의 Sputter 방법과 IBD 방법으로 증착 된 ITO 박막의 전기적, 광학적, 구조적인 특성 변화를 비교 관찰하였고, EBA 후처리로 ITO 박막을 상온에서 처리하여, 박막의 투과도, 면 저항, 미세구조의 변화를 관찰하였다. 각 특성의 변화는 UV-VIS, 4Point-Probe, TEM을 사용하여 분석하였고, 처리 전, 후의 박막의 결합에너지는 XPS로, 박막의 조성변화는 SIMS를 이용하여 각각 분석하였다.

• KIPE Magazine
• /
• v.15 no.5
• /
• pp.32-39
• /
• 2010

최근 그린에너지 시대의 급작스런 도래와 더불어 전력산업의 패러다임 변화에 따라 전기에너지의 고효율 사용과 지능형 전력망 기술인 스마트그리드가 국가차원의 저탄소 녹색성장의 중추 산업분야가 될 전망이다. 이와 더불어 그린홈, 그린빌딩, 그린ICT, 신재생에너지 및 전기자동차를 망라하는 고효율 에너지 네트워크 인프라로 직류배전이 부각되고 있다. 최근 태양광, 연료전지 등 직류 기반의 분산전원 보급의 활성화, 정보화 확산으로 인해 직류를 필요로 하는 정보통신기기의 대폭확대, 전기자동차 보급에 따른 전력저장장치의 확산, LED와 같은 조명부하의 확대 등 변화된 환경 속에 전체 시스템 에너지 효율화, 전력품질의 개선을 위해 교류(AC)가 아닌 직류(DC)로 공급하는 직류배전의 도입 연구가 진행되고 있다. 본고에서는 미래 직류전력시스템의 예측 및 당사가 2009년 말 그린홈에 직류배전을 구축한 실증사례를 소개하고 현재 조기 상용화를 목표로 기술개발을 진행 중인 그린빌딩 적용을 위한 저압 직류배전기술의 개념 및 구현기술을 제안하고자 한다.