• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.137-143
• /
• 2008

High voltage MLCCs with C0G temperature coefficient characteristics could apply DC-DC invertor were investigated for its dielectric properties. Also we manufactured MLCC through various process and studied the characteristics of dielectric break down voltage [BDV] and dielectric property as the variation of thickness in the green sheet and how to pattern the internal electrode. As the thickness of green sheet is increase, the dielectric BDV per unit thickness is decreased. But as the pattern of internal electrodes were floated we could manufacture the high voltage MLCC maintained its dielectric BDV a unit.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.505-511
• /
• 2008

when electric traction system used DC 1500V runs on decline of rail road track and slows down, dc voltage goes beyond regular voltage. In this case extra power is forcibly wasted by resister because rectifier of substation and electric train including power converter and so on are out of order. This paper described a DC electric railway system, which can generate the excessive DC power form DC bus line to AC source in substation for traction system. The purpose of this study was the development of the regenerative inverter system which suppress extra DC-line voltage and regenerate the energy instead of using a resister. That is Developed regenerative inverter system returns the regenerative energy from the DC line voltage to the utility. In addition, the inverter can be compensate the harmonics caused by the power conversion devices used in the DC traction system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1520-1526
• /
• 2003

Design and implementation method or the 100[W] DD/AC invertor using PICl6C711 processor is described in this paper. Especially, fuzzy inference algorithm is involved in this system which can be adaptive to the environment variation. Input/output control and power consumption monitoring is controlled based on PIC16C711 processor, which compute the optimal values acquired from inference engine. Such experimental as function, efficiency, motoring are performed and experimental results showed that monitoring error is less than 2% and widely used in the area of industrial fields.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.976-978
• /
• 1999

Recently PWM invertor is broadly used for control of induction motor. The invertor is able to generate sin wave current from high speed switching power device such as IGBT. However the invertor is disturbed by dead time inevitably needed to prevent a short of the DC link voltage, and the dead time mainly causes distortions of the output current. In this Paper the dead time compensation method which corrects the voltage error from dead time, and Min Max algorithm enlarging the operating voltage of PWM were Proposed. This method can be implemented by software programming without any additional hardware circuit. The proposed algorithms were implemented by DSP(TMS320C31, 40MHz) and FPGA(QL2007, Quick Logic) described in VHDL. and applied to 3 phase induction motor(2.2 KW) to show the superior performance

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.498-505
• /
• 2001

This paper shows how to design a global control of water pumping system using PV array, and tracked maximum power point of PV array only the inverter using the vector control of BLDC motor, and finding the relationships among the DC magnitudes and AC ones in order to omit the DC/DC converter. Conventional MPPT controller was unstable of reason of the ripple-current of DC link in three-phase invertor. Thus, in this paper the control algorithm of BLDC motor using $i_qs$ current is composed to improve the insecurity of conventional MPPT controller To prove the excellence of the proposed method, the contents of this paper is analyzed by means of simulation and testing for the results applying the method that J. A Domfnguez had applied to asynchronous motor to BLDC motor and that of the proposed method in this paper.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1361-1363
• /
• 2005

THD's effects on electronic ballast for fluorescent lamp and ways to improve. To design AC/DC converter in order to enhance current THD. valley-fill circuit and charge pump circuit which has improved valley-fill circuit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.53-53
• /
• 2008

Piezoelectric transformers have been widely used such as DC-DC convertor, invertor, Ballast, etc. Because, the y have some merits compared with electro-magnetic transformers such as step-up ratio, high efficiency, small size and lg hit weight, etc. Piezoelectric transformer require high electromechanical coupling factor kp in order to induce a large out put power in proportional to applied electric field. And also, high mechanical quality factor Qm is required to prevent mechanical loss and heat generation. In general, PZT system ceramics should be sintered at high temperatures between 1200 and $1300^{\circ}C$ in order to obtain complete densification. Accordingly, environmental pollution due to its PbO evaporation. Hence, to reduce its sintering temperature, various kinds of material processing methods such as hot pressing, high energy mill, liquid phase sintering, and using ultra fine powder have been performed. Among these methods, liquid phase sintering is basically an effective method for aiding densification at low temperature. In this study, In order to comparis on low temperature sintering and solid state sintering piezoelectric transformers, rosen type transformers were fabricated u sing two PZT ceramics compositions and their electrical properties were investigated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.88-99
• /
• 2007

In this paper, a novel new pulse power generator based on IGBT stacks is proposed for pulse power application. Because it can generate up to 60kV pulse output voltage without any step- up transformer or pulse forming network, it has advantages of fast rising time, easiness of pulse width variation and rectangular pulse shape. Proposed scheme consists of series connected 9 power stages to generate maximum 60kV output pulse and one series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 850VDC pulse. Finally pulse output voltage is applied using total 72 series connected IGBTs. To reduce component for gate power supply, a simple and robust gate drive circuit is proposed. For gating signal synchronization, full bridge invertor and pulse transformer generates on-off signals of IGBT gating with gate power simultaneously and it has very good characteristics of short circuit protection.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.66-68
• /
• 1997

In this paper, our interest is the identification and control of nonlinear dynamic plant, induction motor, by using neural networks. We usually use vector control in the induction motor such as in the DC motor. When we go over the inputs of voltage source invertor, we can find that torque current and flux current couple each other in the induction motor. Before putting control inputs in the system, we should remove the coupling terms which we already know from them. But we should consider that cross coupling terms have time-varying variables. In this paper, we identified the parameter of induction motor by using neural networks and designed the controller with identified parameters. Through this procedure we obtained compensated inputs which are decoupled each other. Using induction motor currents control, we can make the d axis current hold constant value and control the q axis current at the same time.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.490-493
• /
• 2005

In order to reduce the harmonics in invertor output of the DVR system, typically LC filter is employed. In designing the LC filter, it is required to consider the gild impedance and the characteristic of the harmonics. In this paper, problems in the conventional way of designing the LC filter is analyzed and new LC fitter design technique is proposed. In the proposed technique, parameters of the LC filter are calculated considering grid impedance, THD, DC link voltage and phase lag. The validity and feasibility of the proposed method is verified through the simulations experiments. The DVR system with the proposed LC filter is being built and tested.