• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.304-304
• /
• 2012

CIGS(CuInGaSe2) 태양전지의 후면전극(Back contact)으로 널리 사용되는 Mo 박막은 낮은 면저항, 높은 반사율, 광흡수층 Na-path 제공 등의 조건이 요구된다. 일반적으로 Mo 박막 제작은 DC 마그네트론 스퍼터링 방법이 가장 널리 사용되며, 제작조건에 따라 태양전지 효율에 강한 영향을 미치는 것으로 보고되고 있다. 본 연구에서는 DC 마그네트론 스퍼터링 시 기판에 이온빔(Ion-beam)을 동시 조사하는 이온 빔 스퍼터링 증착(Ion-beam sputter deposition)법으로 Mo 박막을 제작하였다. 제작된 박막의 전기적 및 광학적 특성은 4-point probe, UV-Vis-NIR spectrometer로 각각 조사하였으며 Na-path 제어를 위한 구조적 특성은 XRD, FE-SEM으로 분석하였다. 분석결과에 따르면 기존 DC 마그네트론 스퍼터링 방법보다 상대적으로 더 치밀한 구조와 높은 반사율을 가지는 박막이 제작됨을 알 수 있었다. Mo 박막의 최적조건은 DC power 300 W, Ion-gun power 50 W, Ar flow rate 20 sccm 였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.427-431
• /
• 2000

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) and glass substrates have been deposited by a dc magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by sputtering power, oxygen partial pressure and films thickness. As the experimental results, the XRD patters of ITO films are influenced by sputtering power and pressure. As the power and pressure are increased, (411) peak is grown suddenly. the electrical resistivity is also increased, as the sputteing power and pressure are increased. Transmittance of ITO thin films in visible light ranges is lowered with increasing the sputtering power and film thickness. Reflectance of ITO films in infia-red region is decreased, as the power and pressure is increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.181.2-181.2
• /
• 2015

Sputtering is one of the most popular physical deposition methods due to their versatility and reproducibility. Synthesis of Cr thin films by DC magnetron sputtering using glancing angle deposition (GLAD) has been reported. Chromium thin films have been prepared at two different working pressure($2.0{\times}10-2$, 30, $3.3{\times}10-3torr$) on Si-wafer substrate using magnetron sputtering with glancing angle deposition (GLAD) technique. The thickness of Cr thin films on the substrate was adjusted about 1 mm. The electrical property was measured by four-point probe method. For the measurement of density in the films, an X-ray reflectivity (XRR) was carried out. The sheet resistance and column angle increased with the increase of glancing angle. However, nanohardness and density of Cr thin films decreased as the glancing angle increased. The measured density for the Cr thin films decreased from 6.1 to 3.8 g/cc as the glancing angle increased from $0^{\circ}$ to $90^{\circ}$ degree. The low density of Cr thin films is resulted from the isolated columnar structure of samples. The evolution of the isolated columnar structure was enhanced at the conditions of low sputter pressure and high glancing angle. This GLAD technique can be potentially applied to the synthesis of thin films requiring porous and uniform coating such as thin film catalysts or gas sensors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.100-104
• /
• 2003

$BaTiO_3$ ceramic thin films were manufactured by rf/dc magnetron sputter technique. We have investigated crystal structure, surface morphology and PTCR(positive-temperature coefficient of resistance) characteristics of the specimen depending on second heat-treatment temperatures. Second heat treatments of the specimen were performed in the temperature range of 400 to $1350^{\circ}C$. X-ray diffraction patterns of $BaTiO_3$ thin films show that the specimen heat treated below $600^{\circ}C$ is an amorphous phase and the one heat treated above $1100^{\circ}C$ forms a poly-crystallization. In the specimen heat-treated at $1300^{\circ}C$, a lattice constant ratio (c/a) was 1.188. Scanning electron microscope(SEM) image of $BaTiO_3$ thin films of the specimen heat treated in between 900 and $1100^{\circ}C$ shows a grain growth. At $1100^{\circ}C$, the specimen stops grain-growing and becomes a poly-crystallization.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1617-1620
• /
• 2007

This paper presents a magnetostrictive transpositioner and its fabrication process. To get a transposition movement without shifting or twisting, it is designed as an array type. To fabricate the suggested design, micromachining and selective DC magnetron sputtering processes are combined. TbDyFe film is sputter-deposited on the back side of the bulk micromachined transpositioner, with the condition as: Ar gas pressure below $1.2{\times}10^{-9}$ torr, DC input power of 180W and heating temperature of up to $250^{\circ}C$ for the wireless control of each array component. After the sputter process, magnetization and magnetostriction of each sample are measured. X-ray diffraction studies are also carried out to determine the film structure and thickness of the sputtered film. For the operation, each component of the actuator has same length and out-of-plane motion. Each component is actuated by externally applied magnetic fields up to 0.5T and motion of the device made upward movement. As a result, deflections of the device due to the movement for the external magnetic fields are observed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.206-209
• /
• 2003

The purpose of AR and HR coating is acquire the very low reflection rate and the high reflection rate through the deposition of a thin film using the refraction ofmaterial. Basically if the high refractive material and the low refractive material are chosen and the condition for the experiment is determined, then we solve theproject with the optical design and multi thin film coating. First of all, we choose $SiO_2$for the low refractive material and $TiO_2$ for the high refractive material and apply Sputtering System easy to control the refraction rate and excellent in reconstruction to the equipment of thin film multiplication. For the control of the refraction rate and growth rate we modify RF Power and the ratio of Gas(Ar:O2), And we use Ellipsometer for estimation and analysis of the refraction rate and growth rate and AFM&SEM for the analysis of surface and component.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.56-58
• /
• 2006

본 논문은 PVD(Physical Vapor Deposition)의 마그네트론 스퍼터(Magnetron sputter) 박막코팅(Thin film coating) 공정에서 플라즈마(Plasma)를 발생시키고 제어하는 DC 전원공급 장치에 관한 것이다. 이 논문에서는 임피던스의 변화가 심하고 아크(Arc)가 빈번히 발생하는 플라즈마 부하의 특성에 대해, 과도상태(Transient state)의 출력제어 성능을 향상시키고 아크 발생 시 부하로 전가되는 아크에너지를 저감시키기 위한 직류 전원 공급 장치에 대해 소개한다. 전원장치는 수하특성을 가지며 플라즈마 부하에 적합한 출력 제어성을 확보하고 아크 에너지를 최소화하기 위해 고주파 L-C 직렬공진회로 기법을 적용한다. 개발된 DC 20kW급 전원 장치는 인버터와 고주파 절연변압기, 정류기로 구성된다. 인버터는 $100{\sim}200kHz$의 제어주파수로 PFM 및 PWM 제어를 하며, 단위용량 5kW급 컨버터 4개를 직, 병렬 연결하여 출력리플을 최소화 하였다. 개발된 장치의 우수한 제어성능은 실제 플라즈마 공정에서 시험 평가한 결과를 통해 검증할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.109-109
• /
• 2000

AC형 PDP에서 보호막은 방전시 내구성(내 sputter)이 약한 유전체를 보호함으로써 panel이 장시간동안 안정된 동작을 하게 하며, 방전시 2차 전자를 많이 방출함으로써 방전전압을 낮추는 기능을 갖는다. 또한 패널의 전압특성을 결정하고 수명을 크게 좌우하며 방전전극을 플라즈마 발광에 의한 이온 스퍼터로부터 보호하고 벽전하에 의한 메모리 기능을 가지도록 하는 역할도 하는 것으로 알려져 있다. 일반적으로 보호막의 재료로는 MgO, ZrO, CeO2등이 있으며 특히 MgO는 보호막으로 널리 쓰이고 있다. 일반적으로 MgO의 증착방법의 전자빔 증착, 스퍼터링, 이온 플레이팅법이 있으며 많은 연구자들이 이러한 증착방법에 성장된 박막들을 연구하고 있다. 그러나 Cs을 이용한 MgO의 증착방법은 그리 널리 알려져 있지는 않다. 따라서 본 연구에서는 Ar/O2/Cs을 이용하여 MgO박막을 sputtering 방법으로 증착하였으며 이들의 특성에 관하여 연구하였다. Target으로는 Mg을 사용하였으며 DC sputtering법으로 MgO를 증착하였다. 기판으로는 실리콘과 유리를 이용하였으며 가스로는 Ar과 O2를 이용하고 Cs의 첨가 유무에 따라 증착하였다. 또한 입력 전력, 공정압력, 그리고 O2 가스량에 따라 박막을 증착하였으며 이에 따른 증착속도, 결정성, 조성비를 $\alpha$-step, XRD, 그리고 XPS를 이용하여 측정하였다. CS 참가할 경우 Ar/O2 가스만을 이용하여 증착했을 때보다 증착속도는 증가하였으며 XRD 분석시 (111), (200) 방향으로 우선 성장하는 것을 관찰할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.188-188
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Meta Oxide Semiconductor) based electronic devices, the electronic devices, become much faster and smaller size that are promising property of semiconductor market. However, very narrow interconnect line width has some disadvantages. Deposition of conformal and thin barrier is not easy. And metallization process needs deposition of diffusion barrier and glue layer for EP/ELP deposition. Thus, there is not enough space for copper filling process. In order to get over these negative effects, simple process of copper metallization is important. In this study, Cu-V alloy layer was deposited using of DC/RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane SiO2/Si bi-layer substrate with smooth surface. Cu-V film's thickness was about 50 nm. Cu-V alloy film deposited at $150^{\circ}C$. XRD, AFM, Hall measurement system, and AES were used to analyze this work. For the barrier formation, annealing temperature was 300, 400, $500^{\circ}C$ (1 hour). Barrier thermal stability was tested by I-V(leakage current) and XRD analysis after 300, 500, $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However vanadium-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Therefore thermal stability of vanadium-based diffusion barrier is desirable for copper interconnection.