• 대한전기학회논문지
• /
• 제37권9호
• /
• pp.646-654
• /
• 1988

In this paper, a speed controller using a microcomputer is implemented and applied to a DC Servo Motor. Adaptive control is applied to a system for which a priori knowledge to its mathematical model is insufficient, on the basis of input and output data an apropriate controller is constructed through which the system input is synthesized. The pole-placement PID self tuning control algorithms as a control algorithm is used to compare the performance of the controller with that of the classical PID controller through computer simulations and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.311-312
• /
• 2012

Blade pitch control system monitors and adjusts angle of the blades and controls rotation speed of blades. This paper shows 2MW pitch system hardware and electric part. Blade pitch system consists of pitch drive, gear box, motor and energy storage. Fieldbus is base on CANopen protocol. Fail-Safe system moves the blades to a safety position in case of any fault condition. The super capacitor energy storage provides emergency back up to the Pitch servo driver during feathering the blades. This paper studied Blade pitch servo driver and a bi-directional DC-DC converter for fail-safe system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.455-458
• /
• 1994

This paper deals with the analysis of a DC servo motel speed control system with PI-controller using the SPICE, which was developed as n simulation program for electronic circuits. The system including PI-controller is needed to be modelled for SPICE analysis. The system is divided to motor part, power conversion part, and control part for effective simulations. The overall system is reconstructed by using the above models and the steady-state and transient state are analyzed through SPICE simulations. The simulation results are verified by comparing with the results obtained by conventional simulations.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.395-398
• /
• 2001

본 논문에서는 직류 서보 전동기를 구동원으로 하는 위치 제어계에서 부하변동에 따른 파라메타 변화, 외란 둥에 강인한 2자유도 PID 제어기의 설계법을 제시하여 신경망으로 2자유도 PID 제어기를 구성하였다. 이 제어기의 계수들이 기동시나 계 응답의 변동시 신경망 역전파 알고리즘(Back-Propagation Algorithm)에 의해서도 수성 되도록 하였다. 그리고 이것을 실제의 위치 제어계에 적용하여 실험을 통해 그 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1982년도 하계학술회의강연논문초록집
• /
• pp.127-128
• /
• 1982

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.73-80
• /
• 2005

직립보행로봇은 동적인 시스템 구현을 위해 에너지원과 제어장치부가 로봇에 탑재되어야 한다. 때문에 본 연구에서는 소형에서 높은 기동 토크를 얻을 수 있는 직류전동기를 선택하였다. 직류전동기 서보시스템에는 아날로그 처리방식의 파워앰프를 이용하여, 제어기와 구동기가 일체화된 하나의 모들로 개발하였다. 이를 로봇액추에이터에 적용하고 동작과 복귀시의 응답특성을 연구하였다. 주 제어부는 PIC(Micro controller)를 채용하여 서보시스템과 함께 소형경량으로 로봇에 탑재할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.136-136
• /
• 2000

The direct drive servo valve(DDV) is composed of a DC rotor, link, valve spool and displacement sensor(LVDT) where the spool is directly coupled to the DC motor through the link. Since the DDV is a kind of one-stage valve, the robust controller is required to overcome the flow force effect on the spool motion. The mathematical equations are derived and the stability, accuracy and response speed of a DDV are investigated analytically using a linearized system block diagram. Proportional control, PID control. Time-Delay control, Sliding Mode control, and Proportional control using the load pressure are applied to DDV to find which one shows the best control performance. The digital computer simulation results show that the proportional control using the load pressure satisfies the design requirement of response speed and steady state error regardless of the variation of load pressure,

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.158-165
• /
• 1991

DC servo motors have small torques compared to their weight. In order to reduce the speed and increase the output torque of the DC motor, a gear box is commonly used. The use of a gearbox, however, imposes limitations onmany applications because of the backlash and the reduction in transmission efficiency. Furthemore, the elastic deformation or the compliance of the gearbox decreases the accuracy of the servo mechanism and the stability of the system. In view of the many disadvantages in using the gearbox, a more effective solution has to be found. The solution is the direct drive mechanism. There are many kinds of direct drive motors. I will consider the ultrasonic motor in particular.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.852-854
• /
• 1995

This paper proposes a new identification method that utilizes fuzzy inference in parameter identification. The prosed system has an additional control loop where a real plant has replaced by a plant model. Fuzzy rules describe the relationship between comparison results of the features and magnitude of modification in the model parameter values. In this paper, the tuning method which determines parameters of PID controller automatically is described through applying this algorithm to DC servo motor. And we intend to investigate effectiveness of the method by experiments. This method is effective in auto-tuning because the response of the closed loop has verified. The simulated and the experimental results of the dc servo motor are shown to confirm the viability of this method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1020-1022
• /
• 1993

The speed control associated with do send motors for direct-drive applications of mobile robot is considered. In odor to the high-performance operation of dc servo motor, drive circuits is controlled Pulse Width Modulations. In this case, PWM driving circuit has nonliner charactristics. This circuit composed of H-type bridge with freewheeling diodes in odor to deal with storage energy of motor's inductance and also control method is developed. At resultes, speed charactristics of motor is shown lineristics. In oder to speed control of motor. The opertion of phase-locked servo system is described and a linear discrete model is developed to their behavior. Thise model discussed are the design problems, speed variation.