• 한국표면공학회지
• /
• 제45권6호
• /
• pp.232-241
• /
• 2012

Cr-Ti-B-N coatings were synthesized by a hybrid coating system combining high power impulse magnetron sputtering (HIPIMS) and DC pulse magnetron sputtering from a $TiB_2$ and a Cr target in argon-nitrogen environment, respectively. By changing the power applied on the Cr and $TiB_2$ cathodes, the Cr-Ti-B-N coatings with various Ti/Cr ratio and B content were deposited. The phase structure, microstructure and chemical compositions of the Cr-Ti-B-N coatings were studied by X-ray diffraction (XRD), transmission scanning electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). With increase of Cr element in the coatings, the nanocomposite microstructure consisting of nano-sized (Cr, Ti) N crystallites and amorphous BN phase were obtained in the coatings. The microhardness of the Cr-Ti-B-N coatings exhibited a peak value of ~41 GPa for the $CrTi_{0.1}B_{0.4}N_{1.3}$, and then decreased with further increase of Cr content in the coatings, and all the coatings exhibited low friction coefficient. The oxidation and corrosion behavior of the Cr-Ti-B-N coatings revealed better properties due to the formation of a nanocomposite microstructure.

• 전자공학회논문지S
• /
• 제35S권10호
• /
• pp.11-18
• /
• 1998

최소대역폭 성질을 만족하고, 직류 성분을 지니고, 상태 독립적인 부호화 및 복호화가 가능한 2진 선로부호 MB46d BUDA 셀 기법을 응용하여 설계하였다. 설계된 선로부호 MB46d는 하나의 상태만 존재하므로 앞 상태에 무관하게 부호화할 수 있으며 데이터 메모리 용량이나 하드웨어가 간단하다. 또한, 최대 연속장이 8로 제한되어 있으므로, 수신 측에서 시각 정보를 많이 가져 자체 동기 기능을 가지며, 복호화 규칙이 매우 간단하며, 임펄스 응답 함수가 Raised cosine pulse인 시스템에서 최악의 경우에도 눈 모양이 크게 열려있으므로 어느 정도의 샘플링 지터가 존재하더라도 오류 없는 수신이 가능하다. 제안된 2진 선로부호 MB46d는 직류 성분성질을 제한하지 않은 반면에 고주파 성분을 더욱 억압하여 캐리어 파일럿 삽입 시 데이터 스펙트럼과 파일럿 사이의 간섭을 최소화 할 수 있다는 장점도 가지고 있다.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1734-1739
• /
• 2014

본 논문에서는 변형된 DCRLH 구조의 전송선로를 이용하여 저지대역에서 나타나는 고조파 공진 특성을 제거하고, 큰 감쇄 특성을 갖는 마이크로스트립 저역통과 필터를 설계하고 제작하였다. 저역통과 필터는 통과대역 신호를 잘 전달하고 저지대역 감쇄특성을 키우기 위한 병렬 개방스터브 선로와 고조파 통과특성을 제거하기 위한 직렬 단락스터브 선로를 복합적으로 사용하여 구성하였다. 이렇게 구성함으로써 저지대역에서 나타나는 불필요한 고조파신호를 억제시킬 수 있었고, 필터의 대역통과 성능을 개선할 수 있었다. 제작된 저역통과필터는 1.5 GHZ 이내의 통과대역에서 삽입손실 1.26 dB, 정재파비 1.65, 그리고 1.84 GHz에서 2.18 GHz의 저지대역에서 100 dB 감쇄, 20 와트 전력테스트에서 양호 평가를 얻어 모든 면에서 스펙에서 정한 규정 값 이상의 우수한 성능을 가질 수 있었다.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.242-247
• /
• 2013

Zr-Al-N coatings were synthesized by the hybrid coating system combining arc ion plating and DC magnetron sputtering from a Zr and an Al target in argon-nitrogen atmosphere, respectively. By changing the power applied on the Al cathodes, the Zr-Al-N coatings with various Al contents were deposited. The microstructure and chemical compositions of the Zr-Al-N coatings were studied by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM). With increasing of Al content in the coatings, the solid solution (Zr, Al)N crystallites were observed in the Zr-Al-N coatings. The nanohardness of the Zr-Al-N coatings exhibited a maximum value of 42 GPa for the Zr-Al (7.9 at.%)-N, and decreased with further increase in Al content in the coatings. The oxidation and corrosion behavior of the Zr-Al-N coatings revealed better properties compared than those of ZrN coatings due to the formation of a solid solution.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.535-536
• /
• 2013

본 연구에서는 DC/RF co-sputtering공법을 통해 제작한 In-Mo-O 투명 Mo doping 농도 및 열처리 온도에 따른 전기적, 광학적, 구조적 특성을 분석하고, 최적화된 In-Mo-O 투명전극을 유기태양전지(OPVs)와 유기발광다이오드(OLED)에 적용하여 그 가능성을 평가하였다. Mo doping 농도는 co-sputtering 공정 중 MoO3에 인가되는 radio-frequency (RF) power를 변화시켜 조절되었으며, 투명전극의 광학적 특성 및 전기적 특성 향상을 위해 성막 공정 후 급속 열처리 공정을 온도 별로 진행하였다. In-Mo-O 투명 전극은 Mo 도핑 농도에 영향을 받음을 확인할 수 있었고, 최적화된 Mo doping 파워에서 성막한 In-Mo-O 박막은 급속 열처리 공정 후 면저항 24.57 Ohm/square, 투과도 81.57% (400~1,200 nm wavelength)를 나타내었다. Bulk hetero-junction 기반의 고효율 유기태양전지와 유기발광다이오드 적용하기 위해 본 연구에서 제작된 IMO 투명전극의 구조적 특성, 결정성 및 표면특성은 x-ray diffraction (XRD), atomic force microscopy(AFM), field effect scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM) 분석을 통해 진행하였다. In-Mo-O 투명 전극상에 제작된 OLEDs와 OPV는 reference ITO 전극에 제작된 OLEDs/OPV와 비교할 때 유사하거나 향상된 특성을 나타내었으며 이는 In-Mo-O 박막이 OLED/OPV용 투명 전극으로 적용이 가능함을 말해준다.

• 한국축산시설환경학회지
• /
• 제6권2호
• /
• pp.113-119
• /
• 2000

A Robotic milking cluster system with the manipulator for an automatic milking system was designed and built for farmer to work easily and comfortably during milking processing. The cluster system was composed of screws, cams and links for power transmission, DC motors, the Quick Basic one-chip microprocessor, the vision system for image processing, and tea-cups. Software, written in Visual C+ and Quick Basic, combined the function of image capture, image processing, milking cluster control, and control into one control. The unit was made to transfer from four fixed points to four teats with four teat-cups. Performance tests of the cluster unit, the fully integrated system, were conducted to attach and detach the teat-cup on the teat of a artificial cow. The transfer programming provided for a teat-cup milking loop during the system starts and comes back the original fixed point at the manipulator of it for milking. It transferred the teat-cup with a success rate of more than 70%. The average time it took ot perform the milking loop was about 20 seconds.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.166-176
• /
• 2007

Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.99-106
• /
• 2013

Polyaniline-yttrium trioxide (PAni-$Y_2O_3$) composites were synthesized by the in-situ polymerization of aniline in the presence of $Y_2O_3$ The composite formation and structural changes in these composites were investigated by X-ray diffraction (XRD), Fourier transform infra red spectroscopy (FTIR), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The direct current (DC) electrical conductivity of the order of $0.51{\times}10^{-2}\;S\;cm^{-1}-0.283\;S\;cm^{-1}$ in the temperature range 300 K-473 K indicates semiconducting behavior of the composites. Room temperature AC conductivity and dielectric response of the composites were studied in the frequency range of 10 Hz to 1 MHz. The variation of AC conductivity with frequency obeyed the power law, which decreased with increasing weight percentage (wt %) of $Y_2O_3$. Studies on dielectric properties shows the relaxation contribution coupled by electrode polarization effect. The dielectric constant and dielectric loss in these composites depend on the content of $Y_2O_3$ with a percolation threshold at 20 wt % of $Y_2O_3$ in PAni. Electromagnetic interference shielding effectiveness (EMI SE) of the composites in the frequency range 100 Hz to 2 GHz was in the practically useful range of -12.2 dB to -17.2 dB. The observed electrical and shielding properties were attributed to the interaction of $Y_2O_3$ particles with the PAni molecular chains.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.305-314
• /
• 2017

Most of the existing researches on systemwide optimization of generator maintenance scheduling do not consider the equivalent operating hours(EOHs) mainly due to the difficulties of calculating the EOHs of the CCGTs in the large scale system. In order to estimate the EOHs not only the operating hours but also the number of start-up/shutdown during the planning period should be estimated, which requires the mathematical model to incorporate the economic dispatch model and unit commitment model. The model is inherently modelled as a large scale mixed-integer nonlinear programming problem and the computation time increases exponentially and intractable as the system size grows. To make the problem tractable, this paper proposes an EOH calculation based on demand grouping by K-means clustering algorithm. Network congestion is also considered in order to improve the accuracy of EOH calculation. This proposed method is applied to the actual Korean electricity market and compared to other existing methods.