• 전기학회논문지
• /
• 제67권9호
• /
• pp.1239-1248
• /
• 2018

This paper proposes a fault tolerant and high efficiency operation algorithm for a 4 LEG DC/DC converter for a battery energy storage system(BESS) forming a main power source in a standalone DC micro grid. The BESS for the main power supply in the stand-alone DC micro-grid is required to operate at high speed according to fault tolerant control and load by operating at all times. Fault-tolerance control changes the short-circuit fault to an open-circuit fault by using a fuse in case of leg fault in 4 legs, and operates stably through phase shift control. In addition, considering the loss of the power semiconductor, the number of LEG operation is adjusted to operate at high efficiency in the full load region. In this paper, fault tolerant control and high efficiency operation algorithm of DC/DC converter for BESS in standalone DC micro grid is presented and it is proved through simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1351-1353
• /
• 2000

In this paper, it is proposed to constant power control of solar power system. The solar power system has disadvantage that low power density and variable power output. Proposed strategy is controled by DC/DC converter using phase shift PWM and I-PD type control applying type 1 digital system. The validity of proposed control strategy is verified from simulations results using PSIM.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.103-115
• /
• 2010

This paper discusses a DC distribution system which has been supplied by external AC systems as well as local microturbine distributed generation system in order to demonstrate an overall solution to power quality issue. Based on the dynamic model of the converter, a design procedure has been presented. In this paper, the power flow control in DC distribution system has been achieved by network converters. A suitable control strategy for these converters has been proposed, too. They have DC voltage droop regulator and novel instantaneous power regulation scheme. Also, a novel control system has been proposed for MT converter. Several case studies have been studied and the simulation results show that DC distribution system including microturbine unit can provide the premium power quality using proposed methods.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.361-364
• /
• 2013

기존의 DC-DC 부스트 변환기에서 사용되는 non-overlapping gate driver는 dead-time이 고정되어 있기 때문에 body-diode conduction loss 또는 charge-sharing loss가 발생하는 문제점을 가지고 있다. 이러한 손실을 줄이기 위해 사용된 기존의 적응제어 방식의 경우는 CCM 동작 시 전력트랜지스터가 동시에 on이 되는 구간이 발생하여 시스템 효율이 감소하는 문제점이 있다. 따라서 본 논문 에서는 이러한 문제점을 해결할 dead-time 적응제어 기능과 power switching 기능을 갖는 DC-DC 부스트 변환기를 설계 하였다. CMOS 0.35um 공정을 사용하였고, 2.5V 입력으로 3.3V의 출력전압을 얻으며, 스위칭 주파수는 500kHz 이다. 부하전류 150mA일 때 가장 높은 95.3%의 효율을 얻었다. 설계된 회로의 칩 면적은 $1720um{\times}1280um$이다.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.702-708
• /
• 2020

최근 LED 디스플레이 시스템의 대형화에 따라서 시스템의 효과적인 전력 제어 방법에 대한 연구가 진행 중이다. 그 중에서 본 논문에서는 BLU(Backlight unit)시스템의 채널 별 LED 특성차에 기인한 전력 손실을 최소화하기 위한 전력 제어 방법을 제안하였다. 제안된 전력 제어 기능을 갖는 LED 드라이버 IC는 전 채널의 정전류 동작이 가능한 최소 headroom 전압을 검출 후 DC-DC 컨버터 출력을 선형적으로 제어하여, 불필요한 추가 전압에 따른 전력 소모를 최소화 할 수 있도록 하였다. 또한 채널 별 전압 감지 비교기와 기준 전압 생성 회로가 필요하지 않아서 집적 회로 구현시 칩사이즈 감소 및 안정화 측면에서 큰 장점을 갖는다. 제안된 전력 제어 기능 동작을 검증하기 위해서, DC-DC 내장형 전력제어 LED driver IC를 Cadence 및 Synopsys사의 Design Tool을 사용하여 설계하였으며, Magnachip 0.35um 5V/40V CMOS 공정을 사용하여 제작하였다. 제작된 IC실험을 통해서 제안된 전력 제어 방법이 BLU시스템의 최소 필요 전압을 정상적으로 제어함을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.276-280
• /
• 2001

In this paper, an approach to the design of negative impedance stabilizing controllers for PWM DC/DC converters that are used in DC switching. power supplies with constant power loads is presented. The control approach is based on the feedback linearization technique. Because of the negative impedance destabilizing characteristics of constant power loads, classical linear control methods have stability limitations around the operating points. However, the proposed stabilizing technique improves large-signal stability and dynamic responses. The proposed controllers are simulated and their responses under different operations are studied. Stability of the control technique is also verified using the second theorem of Lyapunov.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.286-292
• /
• 2020

This study proposes a power decoupled multi-port dual-active-bridge (DAB) DC-DC converter employing multiple transformers. Conventional multiport DAB DC-DC converters experience a power coupling issue from the use of a single transformer, which essentially requires complex power decoupling control. To solve this issue, a multiport DAB DC-DC converter employing multiple transformers is proposed to decouple output power without additional complex control algorithms. The proposed converter uses multiple transformers that can expand output ports easily. Therefore, transformers and the proposed multi-port DAB converter can be designed simply. In addition, the number of coupling inductors can be reduced in the proposed three-port DAB converter compared with that in conventional multiport DAB converters. The power decoupling characteristics and equivalent circuit of the proposed converter are analyzed using theoretical model approaches. Finally, a 3-kW laboratory prototype is developed to verify the effectiveness of the proposed converter.

• 전력전자학회논문지
• /
• 제10권5호
• /
• pp.428-435
• /
• 2005

본 논문에서는 연료전지 자동차와 같은 하이브리드 시스템에서 양방향 DC-DC 컨버터에 의한 충${\cdot} $방전 동작시 지령전력을 정확히 제어하여 연료전지의 내구성을 향상시키기 위한 전력제어기를 제안하고자 한다. 또한 연료이용률을 향상시키고 배터리의 SOC를 일정하게 하여 에너지를 효율적으로 사용하기 위한 양방향컨버터의 충${\cdot}$방전 운전 알고리즘을 제안한다.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1617-1624
• /
• 2012

A DC power system has many loads with varied functions. Also, there may be large pulsed loads with short duty ratios which can affect the normal operation of other loads. In this paper, Voltage Bus Conditioner(VBC) without any current sensors is proposed to damp the bus voltage transients by parallel pulsed loads. The proposed control approach requires only one voltage sensor and carries out both the functions of damping the bus voltage transients and maintaining the level of energy stored. The proposed control technique has been implemented on a TMS320F2812 Digital Signal Processor(DSP). Simulated results by a Matlab Simulink and experimental results are presented which verify the control principles and demonstrate the practicalty of the approach.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.371-374
• /
• 2012

DC/DC switching power converters produce DC output voltages from different stable DC input sources regulated by a bi-polar transistor. The converters can be used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The voltage mode DC/DC converter is composed of a PWM (Pulse Width Modulation) controller, a MOSFET (Metal Oxide Semiconductor Field Effect Transistor), an inductor, and capacitors, etc. PWM is applied to control and regulate the total output voltage. It is shown that the output of DC/DC converter depends on the variation of threshold voltage at MOSFET and the variation of pulse width. In the PWM operation, the missing pulses, the changes in pulse width, and a change in the period of the output waveform are studied by SPICE (Simulation Program with Integrated Circuit Emphasis) and experiments.