• 대한전기학회논문지
• /
• 제37권9호
• /
• pp.600-608
• /
• 1988

Although the structure of brushless dc motor is similar to that of a Permanent magnet synchronous motor, its torque-speed characteristcis are the same as those of a permanent magmet dc motor. The brushless dc motor drive systemcomposed of power converter including inverter, rotor positioning sensor and controller has been investigated for the purpose of position control when the motor is fed by a current controlled voltage source inverter. The equivalent transformation of a brushless dc motor into an separately exited dc motor has been possible with the vector control (field oriented control) technique. It is shown in this paper that the position control of a brushless dc mitor can be done fairly accurately only using q-axis current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.684-686
• /
• 2004

This paper is concerned with the DC motor speed control using distributed control system. We design CAN nodes which can transmit control and monitoring data through CAN bus and apply these to distributed networked control system. The results of the experiment validate effectiveness of our distributed networked control system.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.211-220
• /
• 2014

본 논문에서는 하나의 FPGA 내에 DC 모터 제어와 TFT LCD 인터페이스가 내장되어, 제어와 결과 데이터의 실시간 분석이 용이하고 컴팩트한 전(full)-FPGA 기반 모터 제어 시스템을 보인다. PID 속도 제어 모듈과 TFT LCD 상에 실험 결과를 실시간 보여주기 위한 모니터링 모듈을 하나의 FPGA내에 설계하고, 시뮬레이션과 실험을 통하여 유용성을 보인다. FPGA로는 xc3s400를 사용하였고, AD (Aaltium Designer)를 이용하여 전체 시스템을 설계하였다. DC 모터 4상한 운전을 위해 MOSFET를 이용한 PWM 모터 드라이버를 제작하였다.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.704-711
• /
• 2023

본 논문은 직류전동기(DC motor)와 전기적인 특성은 유사하지만, 수명과 신뢰성이 향상된 BLDC 모터의 제어기법에 대해 언급하고 있다. BLDC모터는 회전자의 위치 정보를 사용하여 직류전동기의 기계적인 접촉에 의한 정류 장치를 제거함으로써 내구성과 속도 안정성을 향상시킬 수 있다. 본 연구에서는 BLDC모터의 권선에 흐르는 전류가 직류전동기의 전기자에 흐르는 구형파 형태의 전류인 것에 착안하여 직류전동기에 대한 제어기를 설계하고, 설계된 제어기를 3상 BLDC모터에 적용하여 제어기의 유효성을 확인하였다. 이를 위해 3상 BLDC모터의 전기적인 파라미터 값을 가지는 단상 직류전동기의 모델링을 실시하였고, 도출된 시스템에 대해 근궤적법을 적용하여 전동기의 속도제어를 위한 PI 제어기를 설계하였다. DC 전동기의 속도제어 시뮬레이션을 시행하여 제어기의 성능을 확인하였고, 동일한 제어기를 MATLAB으로 구현한 3상 BLDC모터의 속도제어에 적용하였다. DC 전동기와 유사한 제어 결과를 3상 BLDC모터에서 얻을 수 있었고, 이를 통해 연구에서 제안한 제어기법의 유용성을 확인할 수 있었다.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.145-151
• /
• 2010

영구자석의 반발력을 이용한 반송장치에서 캐리어를 받아 다음 스테이션으로 방향을 전환해주기 위한 회전판의 제어를 수행하기 위한 제어기로서 적당한 모터의 선정을 위하여 두 가지 형태의 제어기를 만들고 이를 비교하여 최적의 제어기를 선정하고자 하였다. 즉 스텝모터를 사용한 마이크로스텝방식의 오픈루프 제어와 DC모터를 사용한 폐루프 제어방식의 DC서보 방향제어기를 설계하고 제작하였다. 이 두 방식의 방향제어기의 성능과 제어특성을 비교하였다.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.389-395
• /
• 2019

This paper presents the sensorless position control of an auxiliary scaffolding step system for vehicles using DC motors. The designed auxiliary scaffolding step has a mechanical protector at the stop position. At this position, the scaffolding is forcibly stopped by the mechanical protector, and the motor current is dramatically increased to the stall current of the DC motor, thereby increasing the electrical damage. In this study, the estimated back EMF- and current model-based observers are proposed to estimate the motor speed and stop position. A simple V/F acceleration voltage pattern is used to operate the auxiliary scaffolding system. The estimated moving position is adopted to determine the stop position of the DC motor with the load current state. The operating current of the DC motor can be reduced by the estimated moving position and V/F acceleration pattern. At the stop position, the proposed sensorless position controller can smoothly stop the DC motor with the estimated moving position and reduced load current without any mechanical and electrical stress from the stall current from the mechanical protector. The proposed control scheme is verified by the comparison of simulations and experiments.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.129-135
• /
• 2007

This paper deals with speed-sensorless control of DC servo motor using Neuro-Fuzzy Observer. DC servo motor has very low rotor inertia and excellent response characteristic and it is very useful to control torque and speed. It is easy to detect the voltage and current and resolver or encoder is used to measure a rotor speed. But it has a limit as a driving speed to detect speed precisely. So it is problem to improve the performance of the driving system. To solve this problem, it is studied to detect a speed of DC servo motor without sensor. In particular, study on the method to estimate the speed using the observer is performed a lot. In this paper, the gain of the observer is properly set up using the Neuro-Fuzzy control and Neuro-Fuzzy Observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. It calculates the differentiation of the rotor current directly using the rotor current measured in the DC servo motor and estimates the speed of the rotor using the differentiation. Proposed speed sensorless control method is performed using the estimated speed. Also, it is proved feasibility of the proposed observer from the comparison tested a case with a speed sensor and a case without a speed sensor which used a highly efficient drive and 200[w] DC servo motor starting system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.153-156
• /
• 2004

This Paper deals with speed control of DC servo motor using a Fuzzy-Sliding observer. Speed sensor detect a speed of rotor continuously. But It have a limit as a driving speed to detect speed precisely. So it is problem to improve the performance of the driving system To solve the problem, it is studied to detect a speed of DC motor without sensor In particular, study on the method to estimate the speed using the observer is performed a lot. In this parer, the gain of the observer is properly set up using the fuzzy control and sliding observer that have a superior transient characteristic and is easy to implement compared the exist ing method is designed. It estimate the derivative of the armature current directly using the armature current measured in the DC motor. It estimate the speed of the rotor using the differentiation. It is Proposed speed sensor less control method using the estimated speed. Optimal gain of Luenberger observer is set up using the fuzzy control and adapted speed control of DC servo motor. It is proved excellence and feasibility of the presented observer from the comparison tested a case with a speed sensor and a case without a speed sensor which used a highly efficient drive and 200W DC servo motor start ing system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1881-1884
• /
• 2003

In some requirements of dc motor drive circuit applications are high quality output with generation of low internal conducted EMI. However the conventional dc motor drive circuits have been usually using unbalanced circuit which generates the high conducted EMI to the frame ground. This paper presents a balanced dc motor drive circuit which is effective way to reduce the common-mode noise. The circuit balancing is to make the noise pick up or occurring in both conductor lines, signal path and return path is equal in amplitude and opposite phase so that it will cancel out in the frame ground. The common-mode conducted noise reduction of this proposed dc motor drive is confirmed by experimental results.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.180-185
• /
• 2014

DC motor is a representative electric motor commonly utilized in various motion control fields. However, DC motor-based motion control systems suffer from degradation of position precision due to nonlinear static friction. In order to enhance control precision, friction model-based compensators have been introduced in previous researches, where friction models are identified and counter inputs are added to control inputs for cancelling out the identified friction forces. In this paper, a static friction compensator is proposed without use of a friction model. The proposed compensation algorithm utilizes internal state manipulation to generate compensation pulses, and related parameters are easily tuned experimentally. The proposed friction compensator is applied to a DC motor-based motion control system, and results are presented in comparison with those without a friction compensator.