• Journal of the Korean institute of surface engineering
• /
• v.31 no.3
• /
• pp.142-150
• /
• 1998

Stainless steel is being used widely for various purposes due to its good corrosion resistance. There has been much research to produce colored stainless steel by several methods such as anodizing and ion plating. In this experiment, we coated TiN(C,O,H)films SUS304 substraate with the DC magnetron spttering system made by Leybold Heraeus and studied the interlater structure and abhesive strength of the films as a function of additional gases, acetylene, hydrogen and oxygen. When the acetylene gas was added into the chamber, the specimen with the interlayer phase had good adhesion due to the toughness of the $\gamma'-Fe_4N$ plase induced from a solid solution of carbon atoms, while low adhesion appeared on the specimen of the non interlayer phase. The formation of the interlayer phase($\gamma'-Fe_4N$) was due to hydrogen embrittlement and internal stress induced by $\gamma'-Fe_4N$ formation in the interlayer. We could fine the interlayer phase ($\gamma'-Fe_4N$) at the interface between the film and the substrate of the TEM image when $\gamma'-Fe_4N$ was detected by the X-ray duffraction metheod.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.5
• /
• pp.251-260
• /
• 1998

Stainless Steel is being used widely for various purposes due to its good corrosion resistance. There have been many researches to produce colored stainless steel by several methods such as anodizing and ion-plating. In this experiment, we $Ti_XN$(C,O) on the films SUS304, aluminium, and glass substrates with DC magentron sputterinng system made by Leybold Hereus, and strdied the structur, corrsion and pit characture of the TiXN observed by TeM image was black and whink and white columnar hed a very fine(200$\AA$) dense sturcture,and the diffraction resistance at the $3{\times}10_6A/\textrm{cm}^2$ and $10_{10}\times{cm}^2$current density were obtained in the under-stoichiometry $Ti_xN$ compound of Ar/$N_2$(Ar:$N_2$=100:6, titanium-rich compound) and the over-stoichiometry compound of Ar/$N_2$((Ar:$N_2$=60:15) respectively. When the thiness was over 1.64$\mu\textrm{m}$, good pit resistance could be obtained and its improvement was especially affected by perfect surfaceface. Typical TiN anodic polarzation curves of very unstable corrosion were observed by $Ti_xN$ film on the glass and perfect film of 3.28$\mu\textrm{m}$ thickness.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.362-364
• /
• 1999

본 논문에서는 Quadtree 구조를 기반으로 한 효율적인 색상 정보 추출과 영상 검색을 수행하는 시스템을 구현한다. 제시한 시스템은 원 영상으로부터 DC영상을 추출하고, DC 영상의 화소들을 RGB에서 HSV의 색상 좌표계로 변환한다. 변환된 영상에서 색상의 분포에 따라 Quadtree 형태로 영역을 분할하고 대표 색상을 추출한다. 마지막으로 추출한 색상과 그 색상의 분포에 따라 Quadtree 형태로 영역을 분할하고 대표 색상을 추출한다. 마지막으로 추출한 색상과 그 색상의 분포값을 영역의 위치에 따라 Quadtree의 단말 노드에 저장한다. 그리고, 사용자가 질의 영상을 주었을 때 Quadtree에 저장된 정보를 이용하여 본 논문에서 제안한 유사도 측정을 통하여 결과 영상을 보여준다. 본 논문에서 제안한 방법으로 실험한 결과 64개의 영역으로 나눈 방법에 비해 비교하는 평균 영역의 개수는 28.9개였고, 검색시간은 2~6초 정도 감소하였다. 또한, 전체 영상의 색상 정보 저장량도 25% 정도 줄어들었지만 질의에 대한 두 방법의 검색 결과는 유사하게 나타났다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2085-2091
• /
• 2001

In lossy compression method, the transformed coefficients are quantized. This results in the quantization noise. The video image quality and bit rate is closely related with the quantization step. In this paper, we proposed a new quantization function for the improved performance. The DC value of each macroblock is compensated depending on the magnitude of DC quantization error. It is implemented very low bit-rate video coding, i.e., H.26L. The experimental result is useful when the object motion is not severe.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.569-574
• /
• 1998

This paper presents a two-paralleled 4 quadrant DC chopper type PWM power conversion circuit in order to generate a gradient magnetic field in the Magnetic Resonance Imaging (MRI) system. This power amplifier is connected in parallel with the conventional 4-quadrant DC chopper using IGBTs at their inputs/outputs to realize further high-power density, high speed current tracking control, and to get a low switching ripple amplitude in a controlled current in the Gradient Coils (GCs). Moreover, the power conversion circuit has to realize quick rise/fall response characteristics in proportion to various target currents in GCs. It is proposed in this paper that a unique control scheme can achieve the above objective. DSP-based control systems realize a high control facility and accuracy. It is proved that the new control system will greatly enlarge the diagnostic target and improve the image quality of MRI.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.847-850
• /
• 2001

영상과 같은 다양하고 복잡한 데이터 검색은 기존의 키워드를 이용한 검색이 아닌 내용 기반 검색 방법이 요구된다. 본문은 JPEG/MPEG 과 같은 영상 압축 기법에서 사용되는 DCT 변환 부호화를 이용하여 각 블록의 평균인 DC 성분을 얻어 이 정보를 이용하여 영상을 검색하는 방법을 제시한다. 기존의 방법은 단순히 DCT 전체 성분을 이용하는 방법으로, 영상 전체의 DCT 정보를 처리하여야 하므로 시간과 메모리의 낭비가 있을 수 있다. 본문에서는 이러한 처리시간과 메모리의 낭비를 막기 위해 DC 성분만을 이용하여 영상 검색을 하며, 영상이 실제로 있는 부분에서는 블록의 크기를 가변적으로 변경하여 검색의 오류를 줄일 수 있다. 또한 검색을 전체 영상에 대한 빠른 1 차 검색과 동일 패턴을 가진 영상의 2 차 세부 검색으로 나누어 실행함으로써 보다 빠른 검색을 할 수 있다. 한편, 겹쳐진 영상에 대해서도 검색이 가능하다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.278-279
• /
• 2015

CIGS 전구체는 각각 DC와 RF power로 셀레늄(Se)이 포함된 CuSe 타겟과 $(In,Ga)Se_2$ 타겟을 이용하여 스퍼터링 기법으로 증착한 후에 고속결정화 특성을 위해 전자빔을 조사하였다. 전자빔의 가속 전자의 강도(DC power)는 2.5~3.5keV로 조정하고 조사시간은 300초, RF power는 200W로 고정하였다. SEM image에서 전구체의 두께가 가속 전자의 강도에 따라 100~200nm의 손실됨을 확인할 수 있었다. XRD data 결과에서 3keV에서 조사된 샘플에서 가장 높은 (112) 피크의 특정 배양성을 보여 높은 결정화특성을 나타내었다. 조성비간의 변화를 보기 위해 XRF data 분석결과 전구체와 샘플간의 조성비의 차이는 그리 크지 않으나 I/III 족 비가 3 keV에서 가장 이상적인 비율이라 알려져 있는 1.0을 보였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.5
• /
• pp.91-96
• /
• 2012

The surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations in air is serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics of surface flashover model with contaminations in air. Also, UV images of discharge and corona pulse count in air are analyzed using prototype UV camera of Korea and a UV sensor with an optic lens. These results are studied at both AC and DC voltage under a non-uniform field.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.182-187
• /
• 2004

In this paper, we propose a PC based distributed controller for a two axis convey table using real-time micro-kernel. PC, Windows program, gives an easy way to implement wealthy GUI and micro-kernel, ${\mu}$C/OS-II, provides a real-time capability to control devices. We built a real-time distributed control system using ${\mu}$C/OS-II kernel which needs to process the tasks for two motors within the desired time to synchronize the motion. We used both semaphore and message mail box for synchronization. Unlike the previous study where we used step motors for the actuator of two axes convey table, we rebuilt the convey table with DC motors and the dedicated position servo which had built in out lab, and then we implemented a realtime distributed control system by putting the micro-kernel into between PC and position servo. Moreover we developed the PC based graphic user interfaces for generating planar drawing image control. Experimental results also presented to show the Proposed control system is useful.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.700-705
• /
• 1997

Transparent conducting indium tin oxide (TC-ITO) thin films are deposited on soda lime glass by a dc magnetron sputtering technique having the unbalanced-magnet structure in order to improve the electrical/material characteristics and to avoid the surface damages. The material properties are measured by the x-ray diffractometer (XRD) and atomic force microscope (AFM). The (400) peak as the preferred orientation of <100> direction for ITO thin films is stabilized with the increase of substrate temperature. The surface roughness estimated by AFM 3D image at the substrate temperature of 40$0^{\circ}C$ is extremely uniform. The best resistivity of ITO films (5500 $\AA$ thick) at 40$0^{\circ}C$ is about 1.3$\times$10$^{-4}$ $\Omega$cm on the position of 4 cm from substrate center.