• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.13-18
• /
• 1999

본 논문은 서로 두께가 다른 실리콘 산화막의 스트레스 바이어스에 의한 트랩밀도를 조사하였다. 스트레스 바이어스에 의한 트랩밀도는 인가 시간 동안의 전류와 인가 후의 전류로 구성되어 있다. 인가 시간 동안의 트랩밀도는 직류 전류로 구성되었으며 인가 후의 트랩 밀도는 계면에서 트랩의 충전과 방전에 의한 터널링에 희해 야기되었다. 스트레스 인가 동안의 트랩밀도는 산화막 두께의 한계를 평가하는데 사용되며 스트레스 인가 후의 트랩밀도는 비휘발성 기억소자의 데이터 유지 특성을 평가하는데 사용된다.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.411-418
• /
• 1998

LPCVD 방법으로 실리콘 산화막 두께 10nm에서 80nm인 MOS를 제작하였다. 그리고 스트레스 전계 산화막 전류의 두께 의존성을 조사하였다. 산화막 전류는 스트레스 전류와 전이전류로 구성되어 있음을 보여 주었다. 스트레스 전류는 스트레스 유기 누설전류와 직류전류로 이루어졌으며 산화막을 통하는 트립 어시스트 터널링으로 행해진다. 전이전류는 계면에서 트랩의 터널링 충전과 방전에 의해 이루어진다. 스트레스 전류는 산화막 전류의 두계 한계를 평가하는데 이용되고 전이전류는 기억소자에서 데이터 유지에 사용된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.189-192
• /
• 2001

This paper proposed that an AC-DC converter system using multiple buck-chopper operates with four choppers connecting to a number of parallel circuits. To improve these, a large number of soft switching topologies included a resonant circuit have been proposed. And, some simulative results on computer are included to confirm the validity of the analytical results. The partial resonant circuit makes use of an inductor using step-down and a condenser of loss-less snubber. The result is that the switching loss is very low and the efficiency of system is high. And the snubber condenser used in a partial resonant circuit makes charging energy regenerated at input power source for resonant operation. The proposed conversion system is deemed the most suitable for high power applications where the power switching devices are used.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.43-48
• /
• 2004

This paper deals with design and fabrication of heater-triggered switching system for the high-Tc superconducting (HTS) power supply with series-connected double-pancake load. Amongst all components, heater triggering is the most important element for the performance of HTS power supply. To fabricate the optimal heater-triggered system, its characteristics have been analysed through the simulation and expriment. The thermal analysis of switching parts of the Bi-2223 solenoid according to the heater input was carried out. Based upon the analysis, 8A electromagnet current and 1.5A DC Heater current were optimally derived, and 8s and 20s for the pumping period were selected in this experiment. In the experiment. the maximum pumping current reached about 24A with Bi-2223 pancake load of 6mH.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.916-921
• /
• 2004

This paper describes microprocessor-based control of photovoltaic power conditioning system. where the microprocessor is responsible for control of output power in accordance with the generated array DC power. The microprocessor includes the control algorithm of maximum power point tracking and converter control algorithm. In this power, we have designed a MPPT(Maximum Power Point Tracker) algorithm with environment factors and a PWM(Pulse Width Modulation) algorithm for high efficiency. The controller has been tested in the laboratory with the power conditioner and shows excellent performance.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.64-71
• /
• 2006

A target of this paper is to study on the usefulness of the adaptive piezoelectric energy harvesting device as a wireless electrical power supply when it is driven by mechanical vibrations of low frequency. For this purpose, an adaptive control technique and a step-down converter are used. A THUNDER series a piezoelectric material (TH7-R), which has been developed by a NASA engineer is selected for this study. In order to provide a mechanical energy to the piezoelectric material, a mechanical motion vibrator is designed. The adaptive controller is implemented using a dSPACE DS1104 controller board. The do-dc converter with an adaptive control technique harvests energy at over five times the rate of direct charging without a converter.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.209-215
• /
• 2018

This paper present a 7-level PWM inverter adopting voltage balancing control to series-connected input capacitors. The prior proposed 7-level PWM inverter consists of dc input source, three series-connected capacitors, two bidirectional switch modules, and an H-bridge. This circuit topology is useful to increase the number of output voltage levels, however it fails to generate 7-level in output voltage without consideration for voltage balancing among series-connected capacitors. Capacitor voltage imbalance is caused on the different period between charging and discharging of capacitor. To solve this problem, we uses the amplitude modulation of carrier wave, which is used to produce the center output voltage level. To verify the validity of the proposed control method, we carried out computer-aided simulation and experiments using a prototype.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.394-400
• /
• 2007

This thesis aims the development of power supply for the BTS of Mobile Telecommunication system. Specially, it receives AC power and it can be possible both supply the uninterrupted and stabile DC Power to BTS and simultaneously maintain full charging the back-up battery that is used in case failing AC power supply. In addition, easy maintenance is also the main purpose of it regardless of front and left side except rear side. In these days, it needs more small size power supply system in order to comply with the user needs regarding more easy maintenance and more less space as become smaller main telecommunication systems. This system can be installed close to wall and support more easy maintenance and it was considered easy expansion in case when it needs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.39-43
• /
• 1998

A large number of soft switching topologies included a resonant circuit have been proposed. But these circuits increase number of switch in circuit and complicate sequence of switching operation. In this paper, the authors propose power conversion system, DC-AC inverter of high efficiency and high power factor with soft switching mode by partial resonant method. The switching devices in a proposed circuits are operated with soft switching by the partial resonant method, that is, PRS2MPC (Partial Resonant Soft Switching Mode Power Converter). The result is that the switching loss is very low and the efficiency of system is high. And the snubber condenser used in partial resonant circuit makes charging energy regenerated at input power source for resonant operation.