• 전기의세계
• /
• 제29권6호
• /
• pp.393-400
• /
• 1980

It is shown in this paper that it is possible to derive generalized state equations for computation of electrical circults constanining SCR and diode elements. Revankar's binary logic variable method is used for formulation of the state equation of chopper circuit. Advantage of this method is that the state equations can be set up without the exact knowledge of the circuit operaton. The different modes of operation of the circuit are identified by the computer itself. By applying this method, the steady state performances of separately excited chopper-fed dc motor considering the counter electromotive force of the motor are investigated and the results of the computer simulation are presented. There is a satisfactory agreement between the theoretical and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.367-369
• /
• 1996

This paper proposed that a buck type AC-DC Converter for high power factor operates with four chopper connecting a number of parallel circuit. And, some simulative results on computer is included to confirm the validity of the analytical results.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.295-300
• /
• 2018

기존에 BLDC모터의 속도 제어 알고리즘으로는 PI 제어 알고리즘이 많이 사용되어왔다. PI 제어 알고리즘의 경우 다양한 속도 변화에 대한 속도와 토크의 응답 특성이 느려, 정상상태에 도달하는 것이 느리다는 단점이 있다. 따라서 본 논문에서는 오버슈트가 조금 있지만 응답 속도를 개선해 정상상태에 빠르게 도달할 수 있는 PWM 퍼지 논리 제어 알고리즘을 제안하였다. PWM으로 응답속도를 줄이고, 퍼지 논리 제어 알고리즘으로 오버슈트를 최소화하였다. 제안된 PWM 퍼지 논리 제어 알고리즘은 DC 초퍼, PWM 듀티 사이클 조정기, 퍼지 논리 제어기 등으로 구성했다. 제안된 알고리즘의 성능과 타당성은 Matlab 2018a의 Simulink를 이용한 시뮬레이션을 통해 입증하였다.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.132-140
• /
• 2001

유니버셜모터는 소형의 직류 직권전동기와 같은 기계적 구조를 가지며 교류.직류 전원을 양용할 수 있는 장점으로 동급의 일반전동기에 비해 높은 속도로 구동이 가능하므로 핸드드릴이나 진공청소기, 세탁기 등의 가정용 기기 등에 일반적으로 사용된다. 위상각제어기를 이용하여 모터로 입력되는 전압을 제어하는 방법은 간단한 구조 때문에 위상지연으로 인해 입력 역률 및 저차 고조파 전류특성이 좋지 않음에도 불구하고 널리 사용되고 있다. 브리지 정류기를 사용하여 교류 전원을 맥동하는 직류 전원으로 변환한 후 DC 초퍼로써 유니버셜모터에 입력되는 평균전압을 제어하는 방법은 제어기의 효율을 높일 수 있고 저차 고조파전류를 감소시킬 뿐만 아니라 저전력값에 대해서도 부하역률의 저하를 막을 수 있다. 본 논문에서는 기존의 제어기의 방법으로 저가의 위상각 제어기를 구서하고 EH한 저가의 마이크로 컨트롤러를 이용한 DC 초퍼시스템을 각각 구성하여 저차 고조파전류 특성을 비교 분석하였다.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.661-675
• /
• 2022

In this paper, an electric vehicle drives with efficient control and low cost hardware using four quadrant DC converter with Permanent Magnet Direct Current (PMDC) motor fed by DC boost converter is presented. The main idea of this work is to improve the energy efficiency of the conversion chain of an electric vehicle by inserting a boost converter between the battery and the four quadrant-DC motor chopper assembly. Consequently, this method makes it possible to maintain the amplification gain of the 4 quadrant chopper constant regardless of the battery voltage drop and even in the presence of a fault in the battery. One of the most important control problems is control under heavy uncertainty conditions. The higher order sliding mode control technique is introduced for the adjustment of DC bus voltage and mechanical motor speed. To implement the proposed approach in the automotive field, experimental tests were carried out. The performances obtained show the usefulness of this system for a better energy management of an electric vehicle and an ideal control under different operating conditions and constraints, mostly at nominal operation, in the presence of a load torque, when reversing the direction of rotation of the motor speed and even in case of battery chamber failure. The whole system has been tested experimentally and its performance has been analyzed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.266-270
• /
• 2001

This paper presents a novel topological prototype of voltage source series quasi-resonant zero current soft-switching pulse frequency modulated dc-dc power converter circuit using IGBTs which incorporates a high-frequency flyback transformer link. Its steady-state operating principle is described on the basis of simulation analysis, along with the open loop controlled power regulation characteristics of the multi-functional coupled inductors linked dc-dc power converter operating under a principle of zero current soft switching commutation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.114-116
• /
• 1993

A novel Neural networks controller for Buck type DC-DC converter is presented and compared with the operation of sliding node coupled several control strategies for the converter. The connection weights of neural networks are trained by error back propagation algorithm. The behavior of the control system that arises fred the use of those methods is analyzed from the viewpoint of dynamic and steady state errors and simulation results are presented.

• 한국에너지공학회:학술대회논문집
• /
• 한국태양에너지학회, 한국에너지공학회 1993년도 춘계 공동학술발표회 초록집
• /
• pp.47-52
• /
• 1993

Recently, as exactly clean source, the research of photovoltaic power generation is undertaken actively and widely. In this paper, an auxiliary power supply system which is composed of photovoltaic generation and DC-DC boost chopper is described. This system in mainly for Air-conditioner appliances is which AC source is formed through rectifying circuit and without electrical storage battery. There exist two operating modes depending on the power quantity of the solar cells and the load. The control algorithm is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.513-516
• /
• 1986

• 한국안전학회지
• /
• 제9권4호
• /
• pp.49-57
• /
• 1994

In this paper, a speed controller using a controller is implemented and applied to a DC motor for FA ( Factory Automation ). The objective of this paper treats the analytical and experimental studies on the improvement of control circuit and control method using a SCR-LEONARD circuit for the speed control of DC motor. This system is concerned with stabilization of single input or single output systems, so the plant (SCR-LEONARD+DC motor) is simplified to the first order system. The parameters for the PID controller are obtained by the transient-response tunning method, and this control scheme has a backward-shift operator. The control algorithms (Chopper＋transient response tunning) is used to check the performance of PID Controller through Computer simulations and experiments. The good experiment results show that the direct control of the DC motor applied to industrial field such oi factory automation.