• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.552-554
• /
• 1999

In this paper, a robust control system with the disturbance observer is proposed for BLDC servo system. The overall control system consists of the speed controller which is implemented with PI controller and the disturbance observer with free parameters. The proposed control system is designed the command input response and the closed loop characteristics independently by using two-degrees-of-freedom concept, so it can improve the closed loop characteristics with no influence on the command input response. The effective suppression of disturbance with the observer improves the characteristics of the closed loop of the system. And also, by fluting the bandwidth of free parameters, measurement noise is considered. To verify the better performance of the proposed control system than that of the conventional PI controllers, the performance of the controller is analyzed theoretically and some simulation results are presented.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1995-1996
• /
• 2006

검출기 안내관은 노내 핵계측 계통의 중성자 분포 측정을 위한 이동형 검출기의 이동경로를 제공할 뿐만 아니라 원자로 냉각수 계통의 압력경계를 유지하는 안전성 등급의 중요한 설비이다. 그러나, 인출과 삽입을 위한 검출기 안내관 취급은 의외로 낙후되어 작업자의 인력에만 의존하고 있는 실정이며, 원자로 격납용기 내부에 위치한 고방사선 지역에서 작업이 수행되고 있는 실정이다. 따라서 노내 핵계측 계통의 검출기 안내관의 안정적인 관리를 위해 검출기 안내판을 일정한 힘으로 인출하고 삽입할 수 있는 자동화시스템의 개발이 이루어지고 있다. 전력연구원에서 개발한 안내관 취급기구는 롤러에 의해 안내관을 파지하고, DC 모터 구동에 의해 안내관을 인출하고 삽입하는데, 본 논문에서는 안내관 취급 기구의 제어 시스템 구성과, 롤러와 안내관 사이에 발생하는 슬립을 고려한 제어기 구조를 제안하고, 실험을 통해 구현한 제어 시스템의 효용성을 보인다.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.33-34
• /
• 2014

In this paper, the inverter switch losses of BLDC motor for three types of PWM method and power devices was analyzed. When BLDC motor is driven at low currents, inverter switch losses for MOSFET is low because MOSFET operates like resistance. But, inverter switch losses for IGBT is higher than MOSFET due to its large turn-off losses. For low power inverter with MOSFET, the power losses of unified PWM is lower than that of unipolar and bipolar PWM.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.370-376
• /
• 1993

In this paper, we present the voltage source algorithm for high speed and low torque ripple operation of a switched reluctance motor (SRM). The SRM has simpler structure than the traditional dc or ac motor. It has a high starting torque and can be operated in the wide range of speed. So it can be applied to various areas. But the SRM has some difficulties in driving circuit and controller due to the large inductance variations. In this study, in order to produce the low torque ripple and the high speed operation, a voltage source algorithm is proposed. We showed the good performance of the proposed controller through simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.22-25
• /
• 1999

A brushless DC motor has the high quality of torque output and silence, has been more widely used in industrial area. As the driver and controller of BLDC motor have been more complicated and precise, simulation method has been much used in motor design. And the output characteristics of BLDC motor is determined by the waveform of BACK-KMF in instinct. But because the conventional model of BLDC motor is obtained by approximation of real nonlinear waveform to ideal trapezoidal waveform, the error is occurred in simulation result. Thus in this paper, for the correction of this error in simulation, the model of real nonlinear waveform considered is proposed, and the simulation result is obtained in case of three-phase, four-poles Y-connected, surface mounted permanent magnet BLDC motor.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.909-911
• /
• 1999

This paper proposes a robust control system with the disturbance observer for BLDC servo system. The overall control system is composed of the speed controller which is implemented with PI controller and the disturbance observer with free parameters. The BLDC servo system can improve the closed loop characteristics without affecting the command input response. The characteristics of the closed loop system is improved by suppressing disturbance effectively with the disturbance observer. Measurement noise is also considered by adjusting bandwidth of free parameters. We can overcome the drawbacks of the conventional PI controller. Finally, the performance of the controller is analyzed theoretically and some simulation results are presented to demonstrate the better performance than the conventional PI controllers.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.17-20
• /
• 2004

This paper is presented for the development of the brushless DC(BLDC) motor for the spindle motor of hard disk drives. To design the spindle motors for HDD, it is very important to consider the reduction of vibration and noises. To design the each parts and investigate the assemble of a motor, we need to calculate the press force and size variation according to the press force. If we design the each parts without the consideration of the size variation, we can not get good result of assemble and performance with exact size of parts. In this paper, we get the computer simulation results to verify optimal size and assemble.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.167-170
• /
• 1999

초음파 변환기의 음향 특성 평가항목으로는 주파수에 따른 출력특성, 입력 전압에 대한 출력의 선형성(방사컨덕턴스), 방사음장의 지향성 및 대칭성 등을 들 수 있다. 평면 주사기법은 교정된 하이드로폰을 이용하여, 초음파 변환기에서 방사된 음파가 형성하는 음장의 분포를 측정하는 기법이다. 본 연구에서는 이들을 측정할 수 있는 장치로 DC servo모터를 장착한 3 축 이송 장치와 가로 400 mm, 세로 800 mm, 높이 400 m를 갖는 수조를 제작하고 제어프로그램을 개발하여 상온의 증류수에 형성된 초음파 음장의 공간 분포를 실험하여, 이론적 예측값과 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.664-669
• /
• 1992

In this paper, we present a DSP-based high dynamic performance torque control scheme of variable reluctance motors(VRM's) for DD(Direct Drive) robots via function inversion technique. The VRM with our controller behaves like DC motors, and hence developed torque tracks given torque command accurately with no torque ripples. Furthermore, our torque control algorithm ensures the production of maximum constant torque under maximum current limitation, minimizes power loss in each phase resistance, and takes magnetic saturation effect into account. Also, since our control algorithm is represented in the form of look-up table, it can be easily implemented with simple digital circuits and this tabular design method is computationally more accurate and simpler compared to the prior methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.848-854
• /
• 1999

In this paper, we designed and implemented a precise pulse motor controller chip that generates the pulse needed to control step motor, DC servo and AC servo motors. This chip generates maximum pulse output rate of 5Mpps and has the quasi-S driving capability and speed and moving distance override capability during driving. We designed this chip with VHDL and executed a logic simulation and synthesis using Synopsys tool. The pre-layout simulation and post-layout simulation was executed by Compass tool. This chip was produced with 100 pins, PQFP package by 0.8${\mu}{\textrm}{m}$ gate array process and implemented by completely digital logic. We developed the test hardware board of performance and the CAMC(Computer Aided Motor Controller) Agent softwate to test the performance of the pulse motor controller chip produced. CAMC Agent enables user to set parameters needed to control motor with easy GUI(Graphic User Interface) environment and to display the output response of motor graphically.