• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.119-121
• /
• 2007

The increment of electric power demand causes interest on new higher power system such as 42V Power Net, and furthermore necessity for development of energy storage device is highlighted recently. Owing to high efficiency and easy speed control of brushless DC(BLDC) motor, the demand of BLDC motor that has high power and low noises are increasing. Especially demand of interior permanent magnet(IPM) type BLDC with high efficiency and high power in electric motion vehicle is increasing. This paper presents the design of the BLBC motor for EHPS(Electro-Hydraulic Power Steering) in 42V system and verified the characteristics by simulation and test results.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1469-1474
• /
• 2007

In recent years, research to machine large-surface micro-features has become important because of the light guide panel of a large-scale liquid crystal display and the bipolar plate of a high-capacity proton exchange membrane fuel cell. In this study, in order to realize the systematic design technology and performance improvements of an ultra-precision machine for machining the large-surface micro-features, a structural characteristic analysis was performed using its virtual prototype. The prototype consisted of gantry-type frame, hydrostatic feed mechanisms, linear motors, brushless DC servo motor, counterbalance mechanism, and so on. The loop stiffness was estimated from the relative displacement between the tool post and C-axis table, which was caused by a cutting force. Especially, the causes of structural stiffness deterioration were identified through the structural deformation analysis of sub-models.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1009-1012
• /
• 1995

This paper presents an example of the development of motor drives for machine tools. Machine tools need motor drives with high control precision and performance. We developed a motor drive system that meets these requirements. The converter, the one component of drive system, adopts modular structure and high DC-link voltage. The drive which consists rest part of drive system is developed based on TMS320C32 DSP and state-of-the-art circuit technology. In this paper each developed parts are described in terms of its structure, specification and features.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.95-103
• /
• 1999

수중운동체가 수중에서 진행할 때 외부 파도에 의한 불확실한 부하 저항을 받으므로 이에 대응하는 핀(조타) 구동부의 제어 문제를 고려한다. 본 논문에서 제시하는 제어기는 본체로부터의 지정 각도를 부여 받으면 이에 부응하여 핀의 각도와 각속도를 이용하여 제어기의 알고리즘을 구축하여 지정된 경로를 추적하게 한다. 또한 핀의 각속도 정보의 이용이 부득이 어려운 상황에 대처하기 위하여 핀의 각도만을 이용한 출력제어기나 추정기를 설계하여 주위 환경의 불확실성을 극복할 수 있는 제어기를 제안한다. DC서보 모터로 구성괸 핀 구동부에 대해 실제 데이터를 사용하여 제안된 제어기의 성능을 시뮬레이션을 통하여 검증한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.166-174
• /
• 2002

Power steering systems far automobile are becoming ever more popular because they reduce steering efforts of the drivers, especially during parking lot maneuver. In this paper, the controller of the motor driven hydraulic power steering(MDHPS) has been designed and developed. This system uses a power source of DC motor instead of engine power source for power steering drive oil pump. The developed MDHPS system is accomplished a highly sensitive power steering resulted from electronic control under variable driving condition. Furthermore, this system is more improvement than type of engine driving far fuel economy.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.32-35
• /
• 2005

밭고랑 옆의 해가림시설 지주목에 파이프라인을 설치하고 방제장치를 탑재한 주행장치가 자동으로 파이프를 추적하면서 농약을 살포 할 수 있는 방제기를 개발하여 인삼재배포장에서 성능시험을 실시하였다. 그 결과를 요약하면다음과 같다. 가. 인삼재배용 방제기의 주행장치는 동력원으로 축전지를 사용하는 DC모터에 의한 4륜 구동형으로 제작하였고, 방제장치는 수직 붐노즐 방식으로 쌍선형 노즐을 좌우에 3개씩 부착하고 살포각도를 조절할 수 있도록 제작하였으며, 인력으로 골간 이동시키는 방식이다 나. 성능시험결과 주행속도는 0.3m/s이고, 장애물이나 요철부의 통과 가능높이는 4cm였고, 작업성능은 38분/10a로 나타났다. 다. 방제성능은 피복면적비를 측정한 결과 인삼 잎 앞면은 100%, 뒷면은 40%이상으로 분무입자의 부착률이 양호한 것으로 나타났다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.69-74
• /
• 1991

The Variable Structure System(VSS) will be of much intrest to educators and design engineers who wish to demonstrate and investigate sophisticated position control methods and their applications. This paper describes DC motor position control by means of VSS concept. The control scheme is derived, implemented and tested in the laboratory where IBM AT computer has been used as a digital controller to control a representative servo system. The control system schematic is given and sample results are shown for illustration. This experiment may serve as a basis for further application of VSS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1777-1782
• /
• 2011

Brushless DC motors applied in many control systems because of the good respose characteristic and the easy control characteristic. The speed control of the BLDC motors is important in the systems. This paper has designed PSO-PID speed controller for the speed control of BLDC motors. The PSO algorithm optimized the parameters of the PID controller in the PSO-PID speed controller. The several methods obtained the optimal inertia weight of the PSO algorithm by comparison. The optimal inertia weight of the PSO algorithm optimized the PSO-PID speed controller for BLDC motors. This paper confirmed the performance of proposed PSO-PID speed controller through simulation results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.371-379
• /
• 2000

The 4-pole linear homopolar synchronous motor (LHSM), so called linear inductor motor, is composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. To reduce the calculation time, the simplified 3D finite element model with equivalent reluctance and/or permanent magnet is presented. To obtain a clear understanding, propriety and usefulness of the developed model, we compare with the results of simplified 3D FEA, general 3D FEA and test. Consequently, the results of simplified and 3D FEM analysis are nearly identical, but much larger than that of static test at d-axis armature excitation. Therefore the improved FEA model, such as full model with half slot, is needed for the precise analysis.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1209-1211
• /
• 2001

Generally, the current controller is located inner the whole controller, so the characteristic of the current controller is important in controlling performance of the upper controller. A current control loop in motor control is designed so that it is 10 times faster than the speed control loop of the upper controller. Thus, the current controller with complex control algorithm is not proper. In this paper, the improved current controller using a conventional digital PI controller and feedforward controller for the brushless BC motor is designed.