• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.456-466
• /
• 2010

Typical combustion instability such as DC-Shift found in the hybrid rocket motor is characterized by non-linearity. DC-Shift can occur in two different realizations. One is so-called a positive shift of measured DC voltage where the pressure increase suddenly. The other is a negative shift where the pressure drops abruptly. In the present work, specifically the negative DC-Shift was investigated to analyze the effect of oxidizer flow condition and the resonance between fundamental frequency and other ones, such as Helmholtz frequency, and acoustic frequency. Results show a peak frequency of several hundreds HZ shifts as combustion proceeds. A negative DC-shift was found as the result of phase cancellation between two dominant frequency, combustion frequency and flow related frequency. Still is it required to study further to identify the change of dominance of frequency during the combustion.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.596-600
• /
• 2017

이 논문에서는 1자유도 시스템이며, DC모터로 간단히 구동 가능한 로봇으로, Jansen Mechanism을 사용한 4족보행 로봇을 설계 및 제작하고, 센서를 사용한 탐사 수행의 예시로 라인 트레이싱을 구현, 성능 테스트를 통해 차기 연구용 및 단가가 낮은 대량 생산형 로봇으로서의 가능성을 검증한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.292-299
• /
• 1999

DC motors are widely used in many industrial fields as the actuator of the robot and the driving power motors of the electrical vehicle, Usually in the sensors of DC motors such as the encoder the tachogenerator and the potentiometer etc. are applied, But usage of these sensors results in the increased price and operating cost such that the application of the motors are limitted. To solve this problem another method to construct low cost control system is investigates. In this paper a new speed control method for DC motor is proposed. This method uses motor parameters instead of using speed or position sensors. In this way the angular velocity is estimated by the measure-ment values of the armature voltage and current instead of measuring the sensor signal. This paper presents an alorithm for estimating the angular velocity of DC motor The effectiveness of the proposed method is verified by experimental results. Also the applicability of the proposed method is presented by applying to the velocity contol of a wheeled mobile robot.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1128-1134
• /
• 2010

This paper is about the development of the 300W underwater thrusting system driven by a brushless DC motor (BLDC) for underwater robots. A design of the structure such as the structure analysis on the thrusting system using FEM and the design of the propeller using the fluid analysis has been performed. Also, a new structure such as decoupling and non-gear structure has been explained. The performance test of the designed and developed thrusting system in water and in air was undertaken and its results were compared with an existing product with high performance. The comparison results show that the developed thrusting system has better performance by 16% in forward thrusting force and by 12% in backward thrusting force.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1388-1392
• /
• 2013

Electric scooter has been using short-lived, low-efficiency DC motor. And motor control system is equipped with imported uniformly, so there is no product differentiation. Also, product design according to the characteristics of disability is difficult. In this study, BLDC motor control system to specialize in a electric scooter for disabled was developed with a semi-permanent features of life, low price, and high performance. This development will also contribute to the activation of the related industries, as well as be able to secure price competitiveness of domestic electric scooter.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.834-839
• /
• 2007

This paper investigates the distortion of magnetic field of a brushless DC (BLDC) motor due to deformed rubber magnet. Global or local deformation of rubber magnet in the BLDC motor is mathematically modeled by using the Fourier series. Distorted magnetic field is calculated by using the finite element method, and unbalanced magnetic force are calculated by using the Maxwell stress tensor. The first harmonic deformation in the global deformation of rubber magnet generates the first harmonic driving frequency of the unbalanced magnetic force, and the rest harmonic deformations of rubber magnet except the harmonic deformation with multiple of common divisor of pole and slot introduces the driving frequencies with multiple of slot number ${\pm}1$ to the unbalanced magnetic force. However, the harmonic deformation with multiple of common divisor of pole and slot does not generate unbalanced magnetic force due to the rotational symmetry. When the rubber magnet is locally deformed, the unbalanced magnetic force has the first harmonic driving frequency and the driving frequencies with multiples of slot number ${\pm}1$.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.39-40
• /
• 2011

본 논문에서는 포토커플러와 DC모터를 이용한 축소형 자동운전 에스컬레이터를 제작한다. 포토커플러는 전기신호를 빛으로 변환하고 그 빛을 다시 전기신호로 전환하는 회로패스이다. 이 축소형 자동운전 에스컬레이터에는 3개의 포토커플러가 사용이 되고 입구에 하나 출구에 두개를 사용하여 입구의 포토커플러가 켜지면 운행이 되고 출구의 두개의 포토커플러 중 2번 포토커플러가 켜지면 안전을 위해 경보음이 울리게 한다. 여기서 에스컬레이터 양축의 힘의 평형을 위해 두개의 DC모터를 사용해 제작하게 된다. 이 축소형 자동 에스컬레이터는 광센서를 이용하여 전기절약과 안전을 생각한다. 직접 제작을 통해 에스컬레이터가 계속 켜져 있지 않고 필요할 때 켜지게 되므로 전기절약이 되고 경보음으로 인해 안전에 유의할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.538-539
• /
• 2018

This paper summarizes the implementation of lane recognition using OpenCV, one of the open source computer vision libraries. The Linux operating system Rasbian(r18.03.13) was installed on the ARM processor-based Raspberry Pi 3 board, and Raspberry Pi Camera was used for image processing. In order to realize the lane recognition, Canny Edge Detection and Hough Transform algorithm implemented in OpenCV library was used and RANSAC algorithm was used to prevent shaking of vanishing point and to detect only the desired straight line. In addtion, the DC motor and the Servo motor were controlled so that the vehicle would run according to the detected lane.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.49-55
• /
• 2015

In this study, among in various scenarios of the duration degradation of the fuel cell, countermeasures for the cathode carbon carrier oxidation and the deactivation of catalyst by hydrogen / air interface formation have been studied. so the system was applied to the air cutoff valve. In terms of the component, the cold start performance, electrical stability, the airtight performance were mainly designed and their performance was confirmed. And in terms of the system, the air electrode flow is blocked off, so the oxygen concentration drops when system is powered off, As a result, By reducing unit cell voltage which affect the durability of the fuel cell reached up to 0.8V, the improved durability of the fuel cell was confirmed.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.