• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.592-599
• /
• 2017

This study examined the nutritional compositions of seven raw and blanched green vegetables: Amaranthus mangostanus L. (AM), Aster scaber Thunberg, Taraxacum platycarpum H. Dahlstedt (TP), Oenanthe javanica (Blume) DC, Allium tuberosum Rottler, Ligularia fischeri (Ledeb.) Turcz (LF), and Euonymus alatus (Thunb.) Siebold (EA). Proximate compositions (moisture, protein, ash, dietary fiber, and fat), minerals (calcium, phosphorus, iron, potassium, sodium, and magnesium), and vitamins (riboflavin and vitamin C) were analyzed in the study. In this study, moisture contents of raw and blanched green vegetables were 71.28~92.68 g/100 g and 76.90~92.09 g/100 g, respectively. The protein and fat contents of raw LF (33.38 g/100 g and 4.50 g/100 g dry weight basis, respectively) were higher than those of other cultivars. Ash contents of AM were significantly higher than those of their respective raw samples. Potassium, magnesium, calcium, and sodium contents of AM were 7,710.63 mg/100 g, 1,786.67 mg/100 g, 1,534.44 mg/100 g, and 743.18 mg/100 g, respectively. In the case of raw green vegetables, iron content of TP was 55.23 mg/100 g, which was the highest value among tested green vegetables. Total dietary fiber content of EA was 59.75 g/100 g, which was the highest value. Riboflavin content was highest in the raw and blanched LF (3.10 mg/100 g and 3.05 mg/100 g, respectively). Vitamin C contents of raw and blanched EA were 468.28 mg/100 g and 471.42 mg/100 g, respectively, which were higher than the other values. There were differences in nutritional ingredients according to different types of green vegetables. Therefore, it is advisable to evenly ingest various green vegetables.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.265-273
• /
• 1997

The MR ratios and the exchange biasing field and interlayer coupling field were investigated in $Ni_{91}Fe_{19}/Co_{90}Fe_{10}/Cu/Co_{90}Fe_{10}/NiO$ spin-valve sandwiches grown on antiferromagnetic NiO films as a function of the NiO thickness, the thickness of Cu and pinning layer $Co_{90}Fe_{10}$. The spin-valve sandwiches were deposited on the Corning glass 7059 by means of the 3-gun dc and 1-gun rf magnetron sputtering at a 5 mtorrpartial Ar pressure and room temperature. The deposition field was 50 Oe. The MR curve was measured by the four-terminal method with applied magnetic soft bilayer [NiFe/CoFe] (90$\AA$) decreased dramatically to less than 10 Oe when the NiFe/CoFe bilayer used an NiFe bilayer thicker that 20$\AA$. So NiFe layer improved the softmagnetic properties in the NiFe/CoFe bilayer. The GMR ratio and the magnetic field sensitivity of the spin-valve film $Ni_{91}Fe_{19}(40{\AA})/Co_{90}Fe_{10}(50{\AA}) /Cu(30{\AA})/Co_{90}Fe_{10}(35{\AA})/NiO(800{\AA})$ was 6.3% and about 0.5 (%/Oe), respectively. The MR ratio had 5.3% below an annealing temperature of 20$0^{\circ}C$ which slowly decreased to 3% above 30$0^{\circ}C$. The large blocking temperature of the spin-valve film was taken (as being) due to the good stability of the NiO films. Thus, the spin-valve films with a free NiFe/CoFe layer clearly had a high large GMR output and showed a effective magnetic field sensitivity for a suitable spin-valve head material.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.754-762
• /
• 1995

Strontium titanate(SrTiO$_3$) thin film was prepared on Si substrates by RF magnetron sputtering for a high capacitance density required for the next generation of LSTs. The optimum deposition conditions for SrTiO$_3$thin film were investigated by controlling the deposition parameters. The crystallinity of films and the interface reactions between SrTO$_3$film and Si substrate were characterized by XRD and AES respectively. High quality films were obtained by using the mixed gas of Ar and $O_2$for sputtering. The films were deposited at various bias voltages to obtain the optimum conditions for a high quality file. The best crystallinity was obtained at film thickness of 300nm with the sputtering gas of Ar+20% $O_2$and the bias voltage of 100V. The barrier layer of Pt(100nm)/Ti(50nm) was very effective in avoiding the formation of SiO$_2$layer at the interface between SrTiO$_3$film and Si substrate. The capacitor with Au/SrTiO$_3$/Pt/Ti/SiO$_2$/Si structure was prepared to measure the electric and the dielectric properties. The highest capacitance and the lowest leakage current density were obtained by annealing at $600^{\circ}C$ for 2hrs. The typical specific capacitance was 6.4fF/$\textrm{cm}^2$, the relative dielectric constant was 217, and the leakage current density was about 2.0$\times$10$^{-8}$ A/$\textrm{cm}^2$ at the SrTiO$_3$film with the thickness of 300nm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.21-27
• /
• 2006

Effects of root, stem and leaf extracts of Zanthoxylum piperitum on the inhibition of lipid peroxidation in the hepatic microsome of rat, DPPH radical scavenging activity, soybean lipoxygenase activity and activated partial thromboplastin times (APTT) were examined in vitro. The highest inhibition of hepatic microsomal lipid peroxidation was observed by ethyl acetate fraction of the root and stem extracts. The high inhibition of lipid peroxidation was observed in the leaf, the root and the stem in order. The DPPH radical scavenging activity of ethyl acetate fraction was higher than that of n-butanol fraction and it was similar to the root and the steam extract. It was similar to the inhibition of hepatic microsomal lipid peroxidation. The DPPH radical scavenging activity was the highest in 0.50 mg/mL of ethyl acetate fraction, and it was 4.4-fold higher than that of a-tocopherol, as an antioxidant standard. The DPPH radical scavenging activity was dependent on the extract concentration in the range of $0.12\~5.00$ mg/mL. The soybean lipoxygenase activity of ethyl acetate fraction was higher than that of n-butanol fraction and it was similar to the root and the stem extracts. The soybean lipoxygenase activity was the highest in 0.50 mg/mL of ethyl acetate fraction. The soybean lipoxygenase activity was dependent on the extract concentration in the range of $0.12\~5.00$ mg/mL. The leaf extract showed the highest antithrombogenic effect followed by the stem and then the root extract. The activated partial thromboplastin times were dependent on the extract concentration in the range of $0.10\~2.00$ mg/mL.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1487-1495
• /
• 2018

In this study, we investigated collagen production and hyaluronic acid production effects for wrinkle improvement test on 50 kinds of land plants and 10 kinds of marine plants native to Jeju Island as a part of developing customized cosmetic materials. Collagen and hyaluronic acid are recognized as major factors affecting skin aging. Cerastium holosteoides var. hallaisanense Mizushima extract ($100{\mu}g/mL$) produced more than 190% of collagen in the extracts of 50 kinds of land plants. Vicia angustifolia var. segetilis K. Koch. extract ($100{\mu}g/mL$) produced more than 160% of collagen. Ftsia japonica Decne. et Planch. extract ($100{\mu}g/mL$), Euonymus japonica Thunb. extract ($100{\mu}g/mL$), Suaeda malacosperma H.Hara extract ($100{\mu}g/mL$), Elaeagnus umbelellata Thunb. extract ($100{\mu}g/mL$), Sedum oryzifolium Makino extract ($100{\mu}g/mL$), Vicia unijuga A. Br. extract ($100{\mu}g/mL$), and Brassica juncea var. integrifolia Sinsk. extract ($100{\mu}g/mL$) showed more than 140% collagen production effect. Among the 10 species of marine plants, Sargassum macrocarpum C. Agardh extract ($50{\mu}g/mL$) produced more than 190% of collagen, and Carpopeltis angusta (Harvey) Okamura extract ($100{\mu}g/mL$), Codiumcoactum Okamura extract ($100{\mu}g/mL$), and Codium tenuifolium S. Shimada, T. Tadano & J. Tanaka extract ($100{\mu}g/mL$) showed more than 140% collagen production. Suaeda malacosperma H.Hara extract ($100{\mu}g/mL$) showed the effect of producing hyaluronic acid more than 140%, and Ftsia japonica Decne. et Planch. extract ($20{\mu}g/mL$) and Wistaria floribunda A.P. DC extract ($100{\mu}g/mL$) showed more than 130% hyalunonic acid production effect. Among the 10 species of marine plants, Peyssonnelia capensis Montagne extract ($100{\mu}g/mL$) was the most effective. Carpopeltis angusta (Harvey) Okamura extract ($100{\mu}g/mL$), Codiumcoactum Okamura extract ($100{\mu}g/mL$), and Codium tenuifolium S. Shimada, T. Tadano & J. Tanaka extract ($100{\mu}g/mL$) showed more than 120% hyalunonic acid production. Jeju resources, which have good collagen and hyaluronic acid production, showed the potential to be applied to solve the skin troubles of customized cosmetics in the future.

• Korean Journal of Food Science and Technology
• /
• v.53 no.2
• /
• pp.195-203
• /
• 2021

Aureobasidium pullulans, a black yeast, produces pullulan, a linear α-glucan composed of maltotriose repeating units linked by α(1→6)-glycosidic linkages. Pullulan can be widely used in food, cosmetic, and biotechnology industries. In this study, we isolated eight strains of A. pullulans from Forsythia koreana, Magnolia kobus DC., Spiraea prunifolia var. simpliciflora, Cornus officinalis, Cerasus, and Hippophae rhamnoides. Among them, A. pullulans MR was selected as the best pullulan producer. The effects of a carbon source, a nitrogen source, and pH on pullulan production were examined. The optimal cultivation conditions for pullulan production by A. pullulans MR were determined by response surface methodology as 15% sucrose, 0.4% soy peptone, and an initial pH of 7 at 26℃. Under these conditions, the predicted pullulan production was 47.6 g/L, which was very close to the experimental data (48.9 g/L).

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.528-553
• /
• 2020

Upland fields are characterized by dry environments, a high degree of disturbance by farming practices such as double-cropping, and a high diversity of crops compared to other field types. This study focused on the floristic composition and characteristics of upland fields in South Korea. Flora surveys were conducted in 36 areas in nine provinces at two times (June and August) in 2015. The results showed that the vascular plants in the upland fields in South Korea included 532 taxa, containing 100 families, 322 genera, 483 species, nine subspecies, 37 varieties, one form, and two hybrids. Among the 100 families, Asteraceae was the most diverse in species (75 taxa), followed by Poaceae (68 taxa), Fabaceae (34 taxa), Polygonaceae (21 taxa), Rosaceae (19 taxa), and Liliaceae (17 taxa). Based on the occurrence frequency of each species, Acalypha australis L. (100%), and Artemisia indica Willd. (100%) were the highest, followed by Humulus scandens (Lour.) Merr., Rorippa palustris (L.) Besser, Conyza canadensis (L.) Cronquist, Erigeron annuus (L.) Pers., Lactuca indica L., Commelina communis L., Digitaria ciliaris (Retz.) Koeler, Echinochloa crus-galli(L.) P.Beauv., Cyperus microiria Steud., and Oxalis corniculata L. The biological type of upland fields in South Korea was determined to be Th-R₅-D₄-e type. Rare plants were found in 11 taxa: Taxus cuspidata Siebold & Zucc, Magnolia kobus DC, Clematis trichotoma Nakai, Aristolochina contorta Bunge, Buxus sinica (Rehder & E.H.Wilson) M.Cheng var. koreana (Nakai ex Rehder) Q.L.Wang, Melothria japonica (Thunb.) Maxim, Mitrasacme indica Wight, Lithospermum arvense L., Carpesium rosulatum Miq., Allium senescens L., and Pseudoraphis sordida (Thwaites) S.M.Phillips & S.L.Chen. Ninety-seven taxa contained naturalized plants composed of 24 families, 68 genera, 97 species, one variety, and one form. The urbanization and naturalization indices were 30.5% and 18.4%, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.41-54
• /
• 2021

This study targets the urban park corresponding to the core areas (Hubs) of Green Infrastructure and estimates their value utilizing the Contingent Valuation Method (CVM) and determines the planning factors which affect them. The research aims to provide basic data for supporting the value improvement in the planning stage for urban parks representing green infrastructure. The primary purpose of this research is to derive variables that affect economic value and planning factors to improve the use-value of urban parks, one of the Hubs of the green infrastructure. In this study, Sejong Lake Park, located in Sejong City, is the target site. This study collected the responses of 105 people by conducting a survey on the intention to pay for the use-value and the planning factors that affect it, targeting visitors to Sejong Lake Park. The study conducts Contingent Valuation Method (CVM) on this survey responses. The results are as follows: first, as a result of analyzing the variables which affect willingness to pay for use-value, residence and age influence the willingness to pay significantly among socioeconomic characteristics. Next, the survey responses of Double-bounded dichotomous choices (DB-DC) CVM are converted into variables through statistic techniques. Furthermore, the variables are used for a Logit model to draw coefficients. The average willingness to pay per person for the use-value of Sejong Lake Park using the derived coefficients was approximately found to be 8,597 won. Therefore, as of 2019, Sejong Lake Park, with a total of 430,000 visitors, is estimated to have an annual economic value of 3.7 billion won. Third, the average Likert scale of the planning factor affecting the decision to pay for the economic value of Sejong Lake Park was the highest along the waterfront landscape, and the convenience facilities and waterfront landscape showed the highest willingness to pay, 10,000 won. In the range between 2,500 won and 5,000 won, the waterfront area ranks highest. Therefore, it can be said that visitors to Sejong Lake Park take account of the economic value of using the waterfront landscape the most. This study is meaningful as a thesis on use-value and the planning factors that affected value evaluation results of urban parks, and the analysis of the correlation between the planning factors of urban parks as hubs located in urban areas.