• 제목/요약/키워드: DC/DC

검색결과 13,292건 처리시간 0.042초

전력변환장치 캐비넷에서의 내부발열 개선을 위한 열유동 분석 및 유통안전성 향상을 위한 진동특성 분석 (Theoretical Heat Flow Analysis and Vibration Characteristics During Transportation of PCS(Power Conversion System) for Reliability)

  • 주민정;서상욱;오재영;정현모;박종민
    • 한국포장학회지
    • /
    • 제28권2호
    • /
    • pp.143-149
    • /
    • 2022
  • PCS needs to freely switch AC and DC to connect the battery, external AC loads and renewable energy in both directions for energy efficiency. Whenever converting happens, power loss inevitably occurs. Minimization of the power loss to save electricity and convert it for usage is a very critical function in PCS. PCS plays an important role in the ESS(Energy Storage System) but the importance of stabilizing semiconductors on PCB(Printed Circuit Board) should be empathized with a risk of failure such as a fire explosion. In this study, the temperature variation inside PCS was reviewed by cooling fan on top of PCS, and the vibration characteristics of PCS were analyzed during truck transportation for reliability of the product. In most cases, a cooling fan is mounted to control the inner temperature at the upper part of the PCS and components generating the heat placed on the internal aluminum cooling plate to apply the primary cooling and the secondary cooling system with inlet fans for the external air. Results of CFD showed slightly lack of circulating capacity but simulated temperatures were durable for components. The resonance points of PCS were various due to the complexity of components. Although they were less than 40 Hz which mostly occurs breakage, it was analyzed that the vibration displacement in the resonance frequency band was very insufficient. As a result of random-vibration simulation, the lower part was analyzed as the stress-concentrated point but no breakage was shown. The steel sheet could be stable for now, but for long-term domestic transportation, structural coupling may occur due to accumulation of fatigue strength. After the test completed, output voltage of the product had lost so that extra packaging such as bubble wrap should be considered.

6kW V2H Power Converter Using Isolated CLLC DAB Converter

  • Ko, Hyun-Seok;Hwangbo, Chan;Park, Seong-Mi;Park, Sung-Jun
    • 한국산업융합학회 논문집
    • /
    • 제25권4_1호
    • /
    • pp.493-504
    • /
    • 2022
  • Recently, as interest in eco-friendliness grows, the supply of hybrid electric vehicles and pure electric vehicles (EVs) for improving fuel efficiency of automobiles is rapidly expanding. The average daily energy consumption of electric vehicles is less than 20 [%] of the total ESS capacity of the vehicle, and research on additional functions using the ESS of the vehicle is urgently needed to expand the supply of electric vehicles. V2H(Vehicle to Home), like V2G(Vehicle to Grid), includes the concept of cooperating with system stabilization using ESS of electric vehicles. In addition, it includes various operations that can realize home welfare, such as uninterrupted power supply in case of power outage at home, and power supply for home DC devices. Therefore, in order to expand the supply of eco-friendly electric vehicles, it is urgently required to develop a V2H system with various functions that can realize home welfare. In this paper, we propose a V2H system with a CLLC resonant converter and a non-isolated step-up converter that can solve different impedance and resonant frequencies depending on the power transfer direction. The proposed V2H system is 6 [kVA] applicable to 150-450 [V], the voltage range that can use the ESS voltage for electric vehicles, and is designed with a capacity that can handle instantaneous electricity use at home. In addition, in order to verify the feasibility, an experiment by Psim simulation and prototype production was performed.

Population structure and regeneration of Zanthoxylum armatum DC. in Salyan, Nepal

  • Phuyal, Nirmala;Jha, Pramod Kumar;Raturi, Pankaj Prasad;Rajbhandary, Sangeeta
    • Journal of Ecology and Environment
    • /
    • 제46권2호
    • /
    • pp.111-125
    • /
    • 2022
  • Background: Zanthoxylum armatum is one of the 30 prioritized medicinal plants for economic development of Nepal with a high trade value. Understanding the ecology of individual species is important for conservation and cultivation purposes. However, relation of ecological factors on the distribution and populations of Z. armatum in Nepal remain unknown. To address this knowledge gap, an attempt has been made to study the population structure, distribution, and regeneration potentiality of Z. armatum. Vegetation sampling was conducted at six different localities of Salyan district along the elevation range of 1,000 m to 2,000 m. Results: Altogether 50 plant species belonging to 44 genera under 34 families were found to be associated with Z. armatum. Significantly higher species richness was found at Rim (1,400-1,700 m) and Chhatreshwori (1,800-2,000 m) and lower at Kupinde (1,600-1,800 m). The highest population density of Z. armatum was at Kupinde (1,600-1,800 m) with a total of 1,100 individuals/ha. and the lowest at Chhatreshwori (1,800-2,000 m) with 740 individuals/ha. Based on the A/F value (Whitford index), it can be said that Z. armatum has random distribution in the study area. The plants were categorized into seedlings, saplings and adults based on plant height and the status of natural regeneration category determined. The regeneration potentiality of Z. armatum in the study area was fair with the average seedlings and saplings densities of 150 and 100 individuals/ha. Respectively. A Shannon-Weinner index mean value of 2.8 was obtained suggesting high species diversity in the study area. Conclusions: The natural distribution and regeneration of Z. armatum is being affected in the recent years due to anthropogenic disturbances. Increasing market demand and unsustainable harvesting procedures are posing serious threat to Z. armatum. Thus, effective conservation and management initiatives are most important for conserving the natural population of Z. armatum in the study area.

재구성 이중편파 패치 배열 안테나 설계 (Design of Reconfigurable Dual Polarization Patch Array Antenna)

  • 이원준;차영직
    • 한국항행학회논문지
    • /
    • 제27권4호
    • /
    • pp.463-468
    • /
    • 2023
  • 본 논문에서는 Pin 다이오드와 결함접지구조를 이용하여 2 개의 편파(수직 편파, 우현 편파)를 전환하여 사용할 수 있는 이중편파 재구성 패치 배열 안테나를 제안한다. 제안된 안테나는 정사각형 마이크로스트립 패치와 접지면에 2개의 일자형 슬롯을 대각선으로 배치하여 구현된 원형 편파 패치 안테나를 5.8 GHz의 반파장 길이인 25.8 mm 간격으로 3x3 배열하여 설계하였으며 각 안테나의 접지면에 대각선으로 배치된 슬롯에 Pin 다이오드와 커패시터를 연결하여 Pin 다이오드에 직류 전압이 인가에 따른 개방/단락 스위치 동작을 통하여 편파를 전환한다. 설계 결과 수직 편파에서는 11.7 dBi, 우현 편파에서는 11.6 dBic의 이득 특성을 가지며 우현 편파에서의 축비는 1.8 dB, 수직 편파일 때 20.3 dB 를 가지고, 중앙 안테나에서 인접한 안테나의 상호결합 특성을 확인 하였을때 수직 편파에서는 최대 -20.8 dB, 우현 편파에서는 최대 -30.1 dB 이다.

Compound Source MBE를 이용한 InGaP/InGaAs p-HEMT 구조의 성장 및 특성 분석 (Growth and Characterization of InGaP/InGaAs p-HEMI Using Compound Source MBE)

  • Kim, J.H.;S.J. Kang;S.J. Jo;J.D. Song;Lee, Y.T.;J.I. Song
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.16-19
    • /
    • 2000
  • DC and low frequency noise characteristics of InGaP/InGaAs pseudomorphic HEMTs (p-HEMTs) grown by compound source MBE are investigated for temperature range of 150K to 370K. Equivalent input noise spectra( $S_{iv}$ ) were measured as a function of frequency and temperature. $S_{iv}$ was measured to be 3.4 $\times$ 10$^{-12}$ $V^2$/ Hz at 1kHz for 1.3 X 50${\mu}{\textrm}{m}$$^2$InGaP/InGaAs p-HEMT at room temperature. Measurements of the low-frequency noise spectra of the p-HEMT as a function of temperature show that the trap with an activation energy level around 0.589 eV is a dominant trap that accounts for the low-frequency noise behavior of the device. The normalized extrinsic gm frequency dispersion of the p-HEMT. was as low as 2.5% at room temperature, indicating that the device has well-behaved low-frequency noise characteristics. Sub-micron (0.25 $\times$ 50${\mu}{\textrm}{m}$$^2$) gate p-HEMT showed $f_{T}$ and $f_{max}$ of 40GHz and 108GHz, respectively.y.y.

  • PDF

2D TOF 자기공명 혈관조영술에서 동맥혈류의 역류로 인한 영상훼손과 이의 제거 (Artifacts due to Retrograde Flow in the Artery and Their Elimination in 2D TOF MR Angiography)

  • 정관진;이종권;김선경;박성홍
    • Investigative Magnetic Resonance Imaging
    • /
    • 제5권1호
    • /
    • pp.38-42
    • /
    • 2001
  • 2D TOF혈관조영술에서 presaturation RF펄스를 사용하여 정맥피에서 나오는 MR신호를 제거하고 얻은 동맥 angiogram에는 band형태로 동맥이 끊어져 나타나는 현상이 자주 보인다. 일부 동맥에서 피의 흐름은 한 심장 주기 동안에 3번의 펄스를 갖는데, 이 중 가운데 펄스는 짧은 기간 동안 역류를 한다. 이 역류하는 동맥피는 정맥피와 같은 방향이기 때문에 presaturation RF펄스에 의해 정맥피 처럼 saturation이 되어서 imaging slice로 흘러 들어가게 될 수 있다. 특히 이러한 경우가 phase encoding step의 dc 부근에서 발생하게 되면 그 때의 단면 영상에서 동맥이 강조가 될 수 없게 되어, 결과적으로 angiogram에는 그 단면을 지나는 동맥의 신호가 없어서 band 형태로 핏줄이 끊어져 나타나게 된다. Imaging slice와 saturation band와의 간격을 변화 시켜 가면서 angiogram을 얻어 봄으로서 이러한 현상을 실험적으로 확인하였다 나아가 saturation band를 rectangle형태에서 ramp 형태로 변경함으로써 이러한 artifacts를 제거 할 수 있는 방법을 제시하였다

  • PDF

Expression of cytokines and co-stimulatory molecules in the Toxoplasma gondii-infected dendritic cells of C57BL/6 and BALB/c mice

  • Jae-Hyung Lee;Jae-Min Yuk;Guang-Ho Cha;Young-Ha Lee
    • Parasites, Hosts and Diseases
    • /
    • 제61권2호
    • /
    • pp.138-146
    • /
    • 2023
  • Toxoplasma gondii is an intracellular protozoan parasite which can infect most warm-blooded animals and humans. Among the different mouse models, C57BL/6 mice are more susceptible to T. gondii infection compared to BALB/c mice, and this increased susceptibility has been attributed to various factors, including T-cell responses. Dendritic cells (DCs) are the most prominent type of antigen-presenting cells and regulate the host immune response, including the response of T-cells. However, differences in the DC responses of these mouse strains to T. gondii infection have yet to be characterized. In this study, we cultured bone marrow-derived DCs (BMDCs) from BALB/c and C57BL/6 mice. These cells were infected with T. gondii. The activation of the BMDCs was assessed based on the expression of cell surface markers and cytokines. In the BMDCs of both mouse strains, we detected significant increases in the expression of cell surface T-cell co-stimulatory molecules (major histocompatibility complex (MHC) II, CD40, CD80, and CD86) and cytokines (tumor necrosis factor (TNF)-α, interferon (IFN)-γ, interleukin (IL)-12p40, IL-1β, and IL-10) from 3 h post-T. gondii infection. The expression of MHC II, CD40, CD80, CD86, IFN-γ, IL-12p40, and IL-1β was significantly higher in the T. gondii-infected BMDCs obtained from the C57BL/6 mice than in those from the BALB/c mice. These findings indicate that differences in the activation status of the BMDCs in the BALB/c and C57BL/6 mice may account for their differential susceptibility to T. gondii.

고령친화용품 체험공간에 대한 가치 평가 (Value Evaluation on the Experience Space of the Age-friendly Product)

  • 오찬옥;주수현;진재문;김수영
    • 디자인융복합연구
    • /
    • 제16권3호
    • /
    • pp.17-37
    • /
    • 2017
  • 본 연구는 고령친화용품 체험공간의 확대 설치를 위한 근거를 파악하기 위해 체험공간에 대한 경험유무에 따른 가상가치를 평가하였다. 추정방법은 고령자 152명을 대상으로 조건부 가치측정 방법인 이중경계형(double-bounded dichotomous choice) 로그로짓모형(log-logistic model)과 로그노말모형(log-normal model)을 적용하였다. 추정결과, 로그로짓모형의 절단평균은 3,401원, 평균은 4,937원으로, 로그노말모형은 절단평균이 3,433원, 평균은 4,144원으로 나타났다. 체험공간이 삶의 질과 산업육성을 위해 필요성이 높음에도 지불의사에 대한 부정적 답변이 많았으며 체험공간의 미경험자가 가치를 상대적으로 높게 평가하였다. 체험공간 추가설치의 문제는 체험공간에 대한 가치평가의 제고뿐만 아니라 복합 기능의 도입, 다양한 고령친화용품 구비, 개인맞춤형 지원, 나아가 접근 편의성과 서비스 수준을 제고해야 할 필요성을 보여주었다.

전기/하이브리드 자동차, 도금용 정류기 등에 적용이 가능한 555 timer와 Photo Coupler를 이용한 대용량 SCR/IGBT용 Gate Driver 설계 (High power gate driver design using 555 timer and photo coupler for electronic/hybrid car and electroplating rectifier)

  • 조은석;고재수;이용근
    • 한국과학예술포럼
    • /
    • 제20권
    • /
    • pp.421-428
    • /
    • 2015
  • 전기/하이브리드 자동차, 도금용 정루기 등에 들어가는 전력변환장치는 SCR, MOSFET, IGBT와 같은 스위칭 소자가 필수적으로 사용되며 이를 구동하기 위해서는 Gate Driver가 역시 필수적으로 사용된다. 본 논문에서는 대용량 전력변환장치에 사용되는 스위칭소자 SCR/IGBT를 구동하는데 필요한 Gate Driver를 제안한다. 제안된 Gate Driver는 4개의 BJT를 이용한 H-Bridge를 포함하며, 이는 입력된 DC 전력을 AC로 변환하여 Transformer를 통하여 Isolate 된 전원을 생성한다. 또한 Gate 제어 신호는 입력 전원과 Isolated된 전원이 연결된 Photo Coupler를 통해 Isolate된 제어 신호로 변환하여 실제 SCR/IGBT를 구동한다. 본 논문에서는 Simulation을 통해서 설계된 555 Timer를 통한 H-Bridge 동작을 검증하며 시제품을 제작하여 27V 50,000A 급의 도금용 정류기를 구동시켜 파형을 확인함으로써 제안된 Gate Driver의 타당성을 검증한다.

스웨덴 연금개혁 고찰에 따른 시사점

  • 최수지
    • 사학연금연구
    • /
    • 제2권
    • /
    • pp.243-274
    • /
    • 2017
  • 최근 우리나라는 유례를 찾아볼 수 없을 정도로 고령화 진행속도가 빠른 나라로 공적 연금재정과 연금제도의 지속가능성에 대한 관심이 증가하고 있는 상황이다. 따라서 사회보장제도 개혁에 성공한 국가로 잘 알려진 스웨덴 사례를 통해 사학연금제도의 유지 및 장기적 재정안정화에 시사하는 바를 찾고자 한다. 스웨덴 정부는 인구고령화에 따른 위험에 상대적으로 안전한 '명목확정기여(Notional Defined Contribution)'방식을 도입하여, 개인의 연금계좌에 연금보험료를 적립하여 수급시점에 본인이 부담한 보험료 상당액을 연금으로 돌려받을 수 있도록 운영하고 있다. 또한 경제상황이 예상 수준보다 침체되고 연금 재정수지가 악화될 경우 이와 연계하여 자동으로 연금가입자의 부담금을 높이고, 지출되는 급여액을 감소시키는 '자동재정균형장치(Automatic Balancing System)'를 도입하였다. 상기와 같이 기여와 급여를 명확하게 연계시키는 스웨덴의 명목확정기여 방식의 연금제도는 장기적 재정안정은 물론이고 안정적인 연금 급여를 제공한다고 평가되고 있다. 스웨덴은 연금개혁 후 확정기여(DC)제도로 전환하여 장기적인 제도 안정성을 추구하지만 사학연금은 확정급여(DB)제도를 유지하면서 급여수준의 하향조정과 보험료율을 점진적으로 상향시켜 재정안정성을 확보하는 것이 가장 큰 차이점이다. 스웨덴의 연금제도와 같이 공적연금의 틀을 유지하면서 사적연금의 장점을 최대로 수용한 명목확정기여 방식의 연금제도를 도입한다면 급격한 재정부담 없이 장기적으로 지속가능한 연금재정 안정화에 기여할 수 있을 것이다. 일견 스웨덴의 정치, 경제상황 및 문화적 특성 차이로 인해 스웨덴의 연금제도 방식을 획일적으로 사학연금제도에 적용하는 것은 불가능하다. 경제상황을 고려한 기여와 급여의 연계 강화를 개혁의 기본방향으로 설정한 스웨덴의 사례를 벤치마킹하여 사학연금 또한 거시경제상황과 조화를 이루는 제도개선 및 자동안정장치를 마련해 보는 것도 고려해 봄직 하다. 지속적으로 스웨덴 및 연금제도 선진 국가들의 연금개혁안을 재검토하여 사학연금제도에 현실적으로 적용할 수 있는 방안과 시사점들을 찾는 노력이 필요할 것이다.