• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.1-6
• /
• 2009

This paper presents new high speed architecture using DBI(Data Bus Inversion) in DRAM. The DBI is one of the general methods in the signaling circuits to decrease the known problems such as SSO and LSI. Many architectures have been proposed to reduce the number of transitions on the data bus. In this paper, the DBI, the Analog Majority Voter (AMV) circuit, the GIO control circuit and the SSO algorithm are newly proposed. The power consumption can he reduced with the help of direct GIO inversion method and the eye diagram of data can be increased to 40ps. Using proposed DBI scheme can produce almost stable SI of DQs against high speed operation. The DBI is fabricated in 90nm CMOS Technology.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.63-68
• /
• 2000

This study was conducted to investigate insecticidal mechanisms of the new insecticides DBI-1015 and DBI-3204 with label compounds of chitin precursors, [$^{14}C$] N-acetylglucosamine and [$^{14}C$] UDP-N-acetylglucosamine in Spodoptera litura. The concentrations of the insecticides for incorporation of chitin precursors into chitin were founded to be functional relationship. The result of in vivo test, $I_{50}$ (ppm) of the DBI-1015, DBI-3024 and diflubenzuron to [$^{14}C$] N-acetylglucosamine were 0.57, 0.89 and 0.26 ppm respectively, and to [$^{14}C$] UDP-N-acetylglucosaminen were 0.99, 0.53 and 0.45 ppm respectively. in vitro test of DBI-1015, DBI-3024 and diflubenzuron by integument fragments, the incorporation rate in the cuticle were low, however, $40{\sim}60%$ inhibitions were observed at $2{\mu}M$ when compared to the untreated control.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.67-73
• /
• 2011

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.1-7
• /
• 2010

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. 35[W] ceramic metal halide lamps has very different characteristics between ignition state and steady state. The developed electronic ballast is satisfied to both ignition state and steady state characteristics by using a micro-controller. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit. It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.105-109
• /
• 2002

Synthetic method of a new benzoylphenylurea insecticide, DBI-3204 [1-(2,6-Difluorobenzoyl)-3-(3,5-bistrifluoromethyl-2-chlorophenyl) urea] was established for manufactural production; 2,6-Difluorobenzoylisocyanate was synthesized by the reaction of 2,6-difluorobenzamide with oxalylchloride in 95% yields, the reaction of 3,5-bis(trifluoromethyl)aniline with N-chlorosuccinimde gave 3,5-bis (trifluoromethyl)-2-chloroaniline in 92% yields, and DBI-3204 was got from 2,6-difluorobenzoylisocyanate and 3,5-bis(trifluoromethyl)-2-chloroaniline in 90% yields. All the process was simplified by using the same reaction solvent, carbontetrachloride.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.288-294
• /
• 2015

CRC function has been built into the high-speed semiconductor memory device in order to increase the reliability of data for high-speed operation. Also, DBI function is adopted to improve of data transmission speed. Conventional CRC(ATM-8 HEC code) method has a significant amounts of area-overhead(~XOR 700 gates), and processing time(6 stage XOR) is large. Therefore it leads to a considerable burden on the timing margin at the time of reading and writing of the low power memory devices for CRC calculations. In this paper, we propose a CRC method for low cost and high speed memory, which was improved 92% for area-overhead. For low-cost implementation of the CRC scheme by the DBI function it was supplemented by data bit error detection rate. And analyzing the error detection rate were compared with conventional CRC method.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1421-1428
• /
• 2015

The efficiency and reliability of the dual-buck inverter (DBI) were greatly improved by eliminating the shoot-through problem and optimally designing the freewheeling diode. The traditional DBI suffers from large harmonic components with low output voltage and large capacity output filter inductor. To overcome the aforementioned disadvantages, a modified DBI (MBDI) was proposed by adopting a quasi-resonant link and pulse density modulation (PDM). This paper first introduces the working principle of the MBDI and PDM, and then the selection principle of system parameters is presented. Finally, a mathematical model of the MBDIis built, and an experiment prototype is set up. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1947-1953
• /
• 2009

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.155-164
• /
• 2024

This study proposes an unsupervised learning-based clustering model to estimate the ESG ratings of domestic public institutions. To achieve this, the optimal number of clusters was determined by comparing spectral clustering and k-means clustering. These results are guaranteed by calculating the Davies-Bouldin Index (DBI), a model performance index. The DBI values were 0.734 for spectral clustering and 1.715 for k-means clustering, indicating lower values showed better performance. Thus, the superiority of spectral clustering was confirmed. Furthermore, T-test and ANOVA were used to reveal statistically significant differences between ESG non-financial data, and correlation coefficients were used to confirm the relationships between ESG indicators. Based on these results, this study suggests the possibility of estimating the ESG performance ranking of each public institution without existing ESG ratings. This is achieved by calculating the optimal number of clusters, and then determining the sum of averages of the ESG data within each cluster. Therefore, the proposed model can be employed to evaluate the ESG ratings of various domestic public institutions, and it is expected to be useful in domestic sustainable management practice and performance management.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1015-1026
• /
• 2018

A family of dual-DC-input (DI) dual-buck inverters (DBIs) is proposed by employing a DI switching cell as the input of traditional DBIs. Three power ports, i.e. a low voltage DC input port, a high voltage DC input port and an AC output port, are provided by the proposed DI-DBIs. A low voltage DC source, whose voltage is lower than the peak amplitude of the AC side voltage, can be directly connected to the DI-DBI. This supplies power to the AC side in single-stage power conversion. When compared with traditional DBI-based two-stage DC/AC power systems, the conversion stages are reduced, and the power rating and power losses of the front-end Boost converter of the DI-DBI are reduced. In addition, five voltage-levels are generated with the help of the two DC input ports, which is a benefit in terms of reducing the voltage stresses and switching losses of switches. The topology derivation method, operation principles, modulation strategy and characteristics of the proposed inverter are analyzed in-depth. Experimental results are provided to verify the effectiveness and feasibility of the proposed DI-DBIs.