• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.585-590
• /
• 2017

The Diameter at Breast Height (DBH) provides information about the volume growth of a tree. In this study, we estimated the relative growth rates of Castanea crenata and Pinus rigida as 4.07% and 3.73%, respectively. Although the difference was low, we demonstrated that the growth rate of C. crenata is slightly faster than that of P. rigida. After calculating the relative growth rate for each section, we found that the relative growth of C. crenata decreased with time. However, the relative growth rate of P. rigida showed an overall increase. The gap widths of both species showed an increasing trend. However, the gradient of the two species was different. The gradient of C. crenata was approximately 12.0, but that of P. rigida was approximately 4.7. This means that the volume growth of C. crenata was faster than that of P. rigida during 4 years. However, this was relatively a short period for measuring the volume growth pattern, and we believe that additional useful information can be obtained by conducting long-term ecological monitoring. Results of canonical correspondence analysis showed that among the climate variables, temperature was significantly related to the gap widths for both species.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.143-149
• /
• 2008

We conduct economic analysis of the snow damage on sugi (Cryptomeria japonica) forest stands in Toyama Prefecture, Japan. We utilize a single tree and distant independent growth simulator called "Silv-Forest." With this growth simulator, we developed an optimization model by dynamic programming, called DP-Silv (Dynamic Programming Silv-Forest). The MS-PATH (multiple stage projection alternative technique) algorithm was embedded as a searching algorithm of dynamic programming. The height / DBH ratio was used to constrain the thinning regime for snow damage protection. The optimal rotation age turned out to be 65 years for the non-restricted case, while it was 50 years for the restricted case. The difference in NPV of these two cases as the induced costs ranged from 179,867 to 1,910,713yen/ha over the rotation age of 20 to 75 years. Under the optimal rotation of 65 years, the cost became 914,226 yen/ha. The estimated annual payment based on the difference in NPV, was from 9,869 yen/ha/yr to 85,900 yen/ha/yr. All in all, 10,000 yen/ha/yr to 20,000 yen/ha/yr seems to cover the payment from the rotation age of 35 to 75 years.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.429-444
• /
• 1988

Considering the recent trent toward the development of multiple-use of forest trees, investigations for comprehensive information on these young stands of Hinoki cypress are necessary for rational forest management. From this point of view, 83 sample trees were selected and cut down from 23-ear old stands of Hinoki cypress at Changsung-gun, Chonnam-do. Various stem growth factors of felled trees were measured and canonical correlaton analysis, principal component analysis and factor analysis were applied to investigate the stem growth characteristics, relationships among stem growth factors, and to get potential information and comprehensive information. The results are as follows ; Canonical correlation coefficient between stem volume and quality growth factor was 0.9877. Coefficient of canonical variates showed that DBH among diameter growth factors and height among height growth factors had important effects on stem volume. From the analysis of relationship between stem-volume and canonical variates, which were linearly combined DBH with height as one set, DBH had greater influence on volume growth than height. The 1st-2nd principal components here adopted to fit the effective value of 85% from the pincipal component analysis for 12 stem growth factors. The result showed that the 1st-2nd principal component had cumulative contribution rate of 88.10%. The 1st and the 2nd principal components were interpreted as "size factor" and "shape factor", respectively. From summed proportion of the efficient principal component fur each variate, information of variates except crown diameter, clear length and form height explained more than 87%. Two common factors were set by the eigen value obtained from SMC (squared multiple correlation) of diagonal elements of canonical matrix. There were 2 latent factors, $f_1$ and $f_2$. The former way interpreted as nature of diameter growth system. In inherent phenomenon of 12 growth factor, communalities except clear length and crown diameter had great explanatory poorer of 78.62-98.30%. Eighty three sample trees could he classified into 5 stem types as follows ; medium type within a radius of ${\pm}1$ standard deviation of factor scores, uniformity type in diameter and height growth in the 1st quadrant, slim type in the 2nd quadrant, dwarfish type in the 3rd quadrant, and fall-holed type in the 4 th quadrant.

• Korean Journal of Environment and Ecology
• /
• v.17 no.2
• /
• pp.153-168
• /
• 2003

Wangpicheon, which is located in Uljin-Gun, Korea, is threatened with various developments plan recently. To investigate the forest structure, actual vegetation and degree of green naturality(DGN) in Wangpicheon, survey was carried out within about 1km width from the stream. In the analysis of actual vegetation, the forest type around Wangpicheon is differentiated into 26 vegetation ones. In these, six Pinus densiflora - dominated vegetation types are appeared a great many of them. In DGN analysis, 70.8% of total area is covered by DGN 8 and 0.3% of total area is covered by DGN 9. According to the analysis of classification by TWINSPAN, the community was divided by three types of Pinus densiflora community and two types of Quercus spp. community i.e. Quercus mongolica and Q. vuliabitis community. The structure of communities were analyzed using importance percentage, and species and individuals, DBH distribution and similarity analysis were executed.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.259-272
• /
• 2023

This study set up 49 survey areas with an area of about 400 square meters in Abies koreana natural habitat to identify the species composition and vegetation structure of the A. koreana forest in the Mt. Jiri Nation Park, conducted field surveys using phytosociological methods, and performed the cluster analysis using the Two-Way Indicator Species Analysis (TWINSPAN) and Table manipulation. Subsequently, species composition analysis using the importance value, species diversity analysis, DBH analysis, sapling analysis, and similarity analysis was conducted by each cluster type. The cluster analysis classified the A. koreana forest in Mt. Jiri into five clusters, A, B, C, D, and E. The forest was divided into two clusters, Magnolia sieboldii-Dryopteris crassirhizoma-Sasa borealis and Betula ermanii-Solidago virgaurea-Calamagrostis arundinacea. The former was classified as type A and B by Cornus controversa-Hydrangea macrophylla, and the latter was classified as type E, a typical community, and a Sorbus commixta-Rhododendron mucronulatum cluster. And the S. commixta-R. mucronulatum cluster was divided into C type and D type by Picea jezoensis-Ligularia fischeri and Ainsliaea acerifolia. Through vegetation analysis, the importance value of A. koreana, Quercus mongolica, Acer pseudosieboldianum, Fraxinus sieboldiana, and B. ermanii was highly expressed in the A. koreana forest in Mt. Jiri. Regarding species diversity, the results were similar to those reported in other studies of A. koreana forests in Mt. Jiri. The analysis of diameter at breast height (DBH) showed that A. koreana dominated all layers, and the growth of saplings was also good, indicating that the dominance of A. koreana is expected to continue for a while. However, when considering the value of biodiversity that is expected to increase and threats caused by climate change, systematic preservation and management are required to respond to various threats based on continuous monitoring.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.67-74
• /
• 2016

Drone images with high spatial resolution are emerging as an alternative to previous studies with extraction limits in high density forests. Individual tree in the dense forests were extracted from drone images. To detect the individual tree extracted through the image segmentation process, the image segmentation results were compared between the combination of DSM and all R,G,B band and the combination of DSM and R,G,B band separately. The changes in the tree density of a deciduous forest was experimented by time and image. Especially the image of May when the forests are dense, among the images of March, April, May, the individual tree extraction rate based on the trees surveyed on the site was 50%. The analysis results of the width of crown showed that the RMSE was less than 1.5m, which was the best result. For extraction of the experimental area, the two sizes of medium and small trees were extracted, and the extraction accuracy of the small trees was higher. The forest tree volume and forest biomass could be estimated if the tree height is extracted based on the above data and the DBH(diameter at breast height) is estimated using the relational expression between crown width and DBH.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.484-490
• /
• 2013

This study was conducted to develop a simulation model for estimating the amount of such products as round wood, dimension lumber and the residual wood biomass produced by processing the individual trees of Larix kaempferi. In the model, the stem volume is assessed using the taper equations of the species to estimate the stem forms. Then, the model simulates the conversion processes of logs to round wood or lumber and assesses the maximum amount of the wood products by the lumber dimensions or round wood size. Also the model provides information on the amount of residuals for kerf and slabs produced on the conversion processes for sawn timber or round wood. According to the results of an application of the model to a L. kaempferi process, the trees greater than 12 cm of DBH can be converted to logs for lumber or round wood production. For the trees, of which DBH is available for log conversion, the maximum amount of final products by dimensions were analyzed. In this analysis, production of the bigger dimension lumber was assumed to be preferred to that of the smaller or round wood. This model can be used for assesment of forest economic value through estimation of merchantable volume for the trees, and assessment of mill residues which has the potential to provide significant amount of feedstock for bioenergy production as well.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.855-862
• /
• 2010

The objectives of this study were to analyze vegetation types and stand structures of the red pine (Pinus densiflora) in Kangwon southern region for stable and sustainable forest management. The pine forests in study sites were classified into 4 communities, 2 groups, so total 6 vegetation units. Species with high constance degree were Quercus mongolica, Rhus trichocarpa, Lindera obtusiloba, Lespedeza maximowiczii, Quercus serrata, Spodiopogon sibiricus, Aster scaber and Fraxinus sieboldiana. In the importance value(I.V.) analysis of each layer, P. densiflora showed highly in tree layer while in other layers competitive broad-leaved species such as Quercus spp. were high. P. densiflora also showed large size of DBH, while broad-leaved species distributed middle and small DBH. The annual ring growths of P. densiflora and competitive broadleaved species were variable according to area, site condition, tree year and species, it is considered that appropriate silvicultual practice methods should be employed to remove rival broad-leaved species for maintenance of sustainable red pine forests considering the characteristics of each stand.

• Korean Journal of Environmental Biology
• /
• v.28 no.1
• /
• pp.30-39
• /
• 2010

We researched community structure, species composition, and habitat environment of Dendropanax morbifera populations distributed in Goheung, Haenam, Wando (I.), and Bogildo (I.) at south coast of the Korean Peninsula. Our research was also estimated possible area for growth of Dendropanax morbifera by analyzing meteorological factors of the habitat thereof. Dendropanax morbifera community divided into Castanopsis cuspidata var. sieboldii group and Carpinus laxiflora group by difference of species composition. Broad-leaved evergreens showed high dominance value in view of rNCD in Dendropanax morbifera community as follows: Camellia japonica (100.0), Quercus acuta (88.6), Castanopsis cuspidata var. sieboldii (55.8), Dendropanax morbifera Lev. (41.4), Trachelospermum asiaticum var. intermedium (23.8), Eurya japonica (19.9) and Ligustrum japonicum (11.5). In the population distribution, 94.2% of Carpinus laxiflora group consisted of sapling and small size class that are less than 5 cm in DBH while 54.2% of Castanopsis cuspidata var. sieboldii group did. The soil environment of habitat showed low soil acidity, good organic matter and water content, and good drainage. The distribution area of Dendropanax morifera habitat had $13^{\circ}C$ or more in annual mean temperature, $7.4^{\circ}C$ or more in daily minimum temperature, $100^{\circ}C$ month or more in warmth index, and approximately 1,344 mm in mean annual precipitation. Dendropanax morifera habitat corresponded to evergreen broad-leaved forest zone located in islands and coast in the southwest region of the Korean Peninsula. The northern limit line of Dendropanax morifera community was determined as Gunsan-Jeongeup-Gwangju-Jinju-Pohang-Youngdeok line based on $13^{\circ}C$ in annual mean temperature that was confirmed in natural habitat of Dendropanax morifera community.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.1
• /
• pp.83-116
• /
• 2016

This study was carried out to investigate the flora and vegetation of Yokjido Island in Tongyeong-si, Korea. Vascular plants collected six times (from March of 2015 to January of 2016) were identified as 547 taxa in total, including 113 families, 354 genera, 487 species, four subspecies, 50 varieties, four forms and two hybrids. The first records from this region contained 314 taxa. In the flora of this area, endemic Korean species numbered eight taxa, and the red list of vascular plants according to the IUCN valuation basis numbered six taxa. In addition, 86 taxa of floristic regional indicator plants specially designated by the Ministry of Environment are included. Among the species investigated in this survey, 99 taxa were identified as specific species bio-geographically as compared floras of other terrestrial regions; 97 taxa of plants in southern areas and two taxa of limited distribution plants on the Korean Peninsula. In all, 74 naturalized plants were recorded in the investigated area. Samples of the forest vegetation of Yokjido Island were mainly classified as Pinus thunbergii community and the Alus firma community. Vertical structures of the communities were stable, and a DBH-class analysis showed that the dominant tree species would be maintained. If disturbance factors such as thinning could be halted, the composition of woody species and herbaceous species would change.