• 한국산림과학회지
• /
• 제83권4호
• /
• pp.521-530
• /
• 1994

재적식(材積式)은 보통 흉고직경과 수고의 함수로 표현되는데, 회귀분석(回歸分析)을 통해 정확도가 높은 식이 주로 채택되고 있다. 우리나라에서도 지금까지 흉고직경(D)과 수고(H)를 독립변수로 하는 지수식(指數式)($V=aD^bH^c$)으로 각 수종에 대한 일반(一般)재적식을 유도하고 있다. 본 연구에서는 강원도 지방내의 홍천, 정선, 명주, 원주, 영월지역에 대한 간곡선식(幹曲線式)을 지역별로 유도하고, 이 간곡선식의 회전체(回轉體) 적분(積分)을 통해 지역별 재적을 직접 추정할 수 있는 간곡선 및 재적식 모델을 마련하였다. 조제된 모델에 의해 지역별로 추정된 재적은 기존의 강원도 지방 소나무재적표에 의해 추정된 재적에 비해 정확도가 높았다. 또한 지역간곡선식에 의해 유도된 간곡선의 형태는 지역에 따라 서로 달랐으며, 특히 영월지역과 원주지역의 수간은 다른 지역에 비해 수간상부에서 가늘게 발달하는 것으로 나타났다. 이와같은 간곡선의 다양한 형태는 재적추정에 있어서도 지역간 차이를 유발하였다.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.530-541
• /
• 2014

The dredge gear is dragged along the bottom of the sea to catch targeted edible bottom dwelling species. Species composition and ecological index of the catches of dredge were estimated around Gangneung coastal fishing ground by dredge with different mesh size and tooth space from July to December 2013. Eight different types of dredge including four different tooth space (24.7 mm, 29.9 mm, 34.9 mm, 40.1 mm) and four different mesh size(15.5 mm, 32.7 mm, 51.1 mm, 60.0 mm) were used in the experiment. During the experiment, total catches were collected 31 species as sipunculida 1 species, mollusca 13 species, annelida 3 species, arthropoda 8 species, echinodermata 4 species and others 2 species. The dominant genus were mollusca and echinodermata while the dominant species were Megangulus venulosus, Pseudocardium sachalinensis, Schaphechinus brevis. The richness index was ranged 1.29-1.72, evenness index was 0.6-0.65 and diversity index was 1.65-1.83 according to the tooth space and mesh size of dredge. Richness index, diversity index were high at tooth space 34.9 mm dredge and ecological index showed decreasing tendency with the increasing of mesh size of dredge. Cluster and MDS analysis, based on a Bray-Curtis and similarity matrix of fourth root transformed data of number of species and wet weight, showed division into four different groups as four different tooth space (Group A), four different mesh size Group B (51.1 mm, 60.0 mm), Group C (32.7 mm) and Group D (15.5 mm).

• 소성∙가공
• /
• 제16권7호
• /
• pp.530-537
• /
• 2007

This paper is concerned with the analysis of plastic deformation of bimetal co-extrusion process. Two sets of material combination have been adopted for analysis, i.e. combinations of Cu/Al and Fe/Al. In the first set of material combination, the selected materials are AA 1100 aluminum alloy as hard material and CDA 110 as soft one. This type of material selection is to examine the effect of hard core and soft sleeve and vice versa on the deformation pattern in terms of plastic zone and velocity discontinuity along the contact surface between construction materials. Four different cases of co-extrusion process in terms of material combination and interference bonding were simulated to investigate the effect of material arrangement between core and sleeve, and of bonding on the plastic zones and velocity discontinuity. In the other set of material combination, model materials used as core and sleeve were AA 1100 and AISI 1010, which are relatively soft and hard, respectively. Process parameters except diameter ratio of core to sleeve material such as semi-die angle, reduction in area in global sense and die comer radius have been set constant throughout the simulation to concentrate our effort on the analysis of influence of diameter ratio on deformation behavior such as deformation zone, surface expansion, exit velocity discontinuity between composite materials, and extrusion forces.

• Journal of Periodontal and Implant Science
• /
• 제25권3호
• /
• pp.487-496
• /
• 1995

Previous studies have demonstrated that not all A. actinomycetemcomitans produced significant level of leukotoxic factor and its leukotoxicity have associated with serotype and genetic variation. Our aim was to investigate on the interrelationship between serotype and leukotoxicity of an A. actinomycetemcomitans consisting of 13 clinically well characterized. Korean isolates and to evaluate if particular virulent clonal types of A. actinomycetemcomitans are associated with periodontal disease. For this study, 13 strains of A. actinomycetemcomitans from 6 patients with periodontal disease were isolated and identified by using a selective medium(tryptic soy agar supplemented with 10% serum, $75{\mu}g$ of bacitracin and $5{\mu}g$ of vancomycin per ml) in 10% C02 incubator for 3days with routine Gram staining, colony morphology and biochemical test..For serotyping, antisera were prepared from reference strains of 5 serotypes. (ATCC 29523,Y4, SUNY aB 67, IDH 781, IDH 1705) and then ammonium sulfate precipitation, immunoabsorption and indirect immunofluoroscent procedures were done. For analysis of leukotoxicity, sonic extract of A. actinomycetemcomitans exposed to PMN, and trypan blue was stained for counting the cell viability. Finally Southern blot analyses of genomic DNA digested with the restriction enzyme Tag I was done and the Southern blots were hybridized with the 530bp fragment, termed delta 530, originating from the ltx promoter of strain 652 and deleted from strain JP2. Also ltxA-3.1 and SC2 probe from strain JP2 were hybridized with genomic DNA fragments. Results reveal that strains isolated showed approximately equal proportions of 3 serotypes(b, d, e) and serotype b was not detected. 2 patients harbored 2 different serotypes in the same disease site. The prevalence of leukotoxic strain was 23% and there was no relationship between serotype, leukotoxicity and clinical observations. Especially virulent clonal types of Actinobacillus actinomycetemcomitan (JP2 strain) could not found. Further studies are necessary on the genetic polymorphism of leukotoxin and its relations to clinical status.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.525-530
• /
• 2008

In the present study, the cooling performances of the air-conditioner applied the fin-tube and aluminum PF heat exchangers have been experimentally investigated by using the calorimeter. The experiment is carried out in the conditions of the standard temperature and the low temperature. Fin type of PF heat exchanger is a triangler and squarer form. PF heat exchanger has smaller refrigerant weight and larger capacity and COP han the fin-tube heat exchanger. The performance of PF-2 heat exchanger with the squarer in is more excellent than that of PF-1 heat exchanger with the triangler fin. The high pressure of PF heat exchanger decreases about 7%, compared to the fin-tube heat exchanger. Also, CSPF of the fin-tube and PF heat exchanger is evaluated.

• 정보처리학회논문지D
• /
• 제12D권4호
• /
• pp.521-530
• /
• 2005

무선 네트워크(Wireless Network)의 약한 연결성 및 접속단절, 모바일 클라이언트의 이동성, 모바일 클라이언트의 휴대성으로 인해 발생하는 모바일 데이터베이스 시스템(Mobile Database System) 관련 이슈들과 이 문제들을 해결하기 위한 연구들도 한창이다 이동 컴퓨팅은 언제 어디서나 원하는 모든 정보를 이용할 수 있는 사용자의 편의성이나 성능 면에서의 요구를 만족시키고 있지만, 데이터 관리 측면에서는 해결되어야만 하는 많은 문제점들을 안고 있다. 본 논문은 모바일 클라이언트-서버(Mobile Client-Server) 환경에서 모바일 데이터베이스 시스템 특성상 가질 수 있는 무선 네트워크의 약한 연결성 및 접속성 단절로 인한 데이터베이스 비축(Database Hoarding)과 관련된 문제, 공유 데이터(Shared Data)의 일관성(Consistency)유지 문제, 그리고 로그(Log) 최적화 문제를 해결하기 위한 모바일 질의 처리 시스템(MQPS : Mobile Query Processing System)을 설계하는데 목적이 있다. 또한, MQPS의 효율성 증명을 위해 C-I-S(Client-Intercept-Server) 모델과의 성능비교를 통해 제안한 시스템이 우수하다는 것을 입증하였다.

• Journal of Microbiology and Biotechnology
• /
• 제10권3호
• /
• pp.349-354
• /
• 2000

Abstract A facultative alkalophilic gram-negative Vibrio metschnikovii strain RH530, isolated from the wastewater, produced several alkaline proteases (VAP) including six alkaline serine proteases and a metalloprotease. From this strain, high yielding YAP mutants were isolated by NTG treatment. The isolated mutant KS1 showed nine times more activity than the wild-type after optimization of the culture media. The production was regulated by catabolite repression when glucose was added to the medium. The effects of several organic nitrogen sources on the production of the YAP were investigated to avoid catabolite repression. The combination of 4% wheat gluten meal (WGM), 1.5% cotton seed flour (eSF), and 5% soybean meal (SBM) resulted in the best production when supplemented with 1% NaCl. The YAP showed a resistance to surfactants such as $sodium-{\alpha}-olefin$ sulfonate (AOS), polyoxy ethylene oxide (POE), and sodium dodecyl sulfate (SDS), yet not to linear alkylbenzene sulfonate (LAS). However, the activity of the YAP was restored completely when incubated with LAS in the presence of POE or $Na_2SO_4$. The YAP was stable in a liquid laundry detergent containing 6.6% SLES (sodium lauryl ether sulfate), 6.6% LAS, 19.8% POE, and stabilizing agents for more than two weeks at $40^{\circ}C$, but the stability was sharply decreased even after 1 day when incubated at $60^{\circ}C$. A washing performance test with the YAP exhibited it to be a good washing power by showing 51 % and 60% activity at $25^{\circ}C{\;}and{\;}40^{\circ}C$, respectively, thereby indicating that the YAP also has a good detergency at a low temperature. All the results suggest that the YAP produced from the mutant strain KSI has suitable properties for use in laundry detergents.rgents.

• 한국식품저장유통학회지
• /
• 제13권2호
• /
• pp.252-258
• /
• 2006

오미자를 이용하여 음료 제조를 하기 위한 오미자 추출의 최적조건을 알아보기 위하여 반응 표면 분석을 이용하였다. 각각의 반응표면분석 결과 고형분은 25배 이상의 용매비, $75^{\circ}C$이상 온도, $7{\sim}8$시간, 총산은 25배 이상의 용매비, $75^{\circ}C$의 온도, $6{\sim}7$시간, 페놀성 화합물은 25배의 용매비, $80^{\circ}C$의 온도, $6{\sim}7$시간, 환원당은 25배 이상의 용매비, $80^{\circ}C$ 이상의 온도, $6{\sim}8$시간, 비타민 C는 25배 이상의 용매비, $80^{\circ}C$의 추출 온도와 $5{\sim}6$시간의 추출조건에서 최적의 추출조건을 나타내었고, 탁도의 경우는 7시간에서 $60^{\circ}C$이상, 용매비는 25배 이상일 때 탁도가 가장 높게 나타났다. 이에 따라 시간을 6시간으로 고정하여 각각의 추출조건에 따른 특성을 알아본 결과 Fig. 3과 같은 결과를 얻었다. 비타민 C, 환원당, 페놀성 화합물, 그리고 가용성 고형분의 함량은 높고, 음료 제조 시에 강한 신맛을 주어 제조된 음료의 기호도에 좋지 못한 영향을 줄 수 있는 총산의 양은 적은 지점을 임의적으로 정하여 최적 추출 조건으로 선정하였으며, 이 범위의 온도는 $65^{\circ}C$, 용매비는 25배로 예측한 결과 가용성 고형분은 2.2%, 비타민 C는 530 mg/g, 환원당은 479 mg/g, 페놀성 화합물은 260 mg/g, 총산의 함량은 190 mg/g, 탁도는 1.18 (O.D)로 나타났다. 결정한 최적 추출조건에서 오미자를 추출한 결과 고형분 1.9%, 비타민 C 451mg/g, 환원당 397 mg/g, 페놀성 화합물 260 mg/g, 총산의 함량 170mg/g, 탁도 1.20 (O.D)와 같은 결과를 얻었으며 반응표면분석에서 예측한 것과 다소간의 양호한 결과로 나타났다.

• 열처리공학회지
• /
• 제20권6호
• /
• pp.323-328
• /
• 2007

This study has been investigated the effect of high temperature gas nitriding (HTGN) heat treatment of STS 444 (18Cr-0.01Ni-0.01C-0.2Nb) ferritic stainless steel in an atmosphere of nitrogen gas at the temperature range between $1050^{\circ}C\;and\;1150^{\circ}C$. The surface layer was changed into martensite and austenite with the nitrides of NbCrN by HTGN treatment. Due to the precipitation of nitrides and matrensite formation, the hardness of the surface layer showed $400Hv{\sim}530Hv$. The nitrogen concentration of the surface layer appeared as 0.05%, 0.12% and 0.92%, respectively, at $1050^{\circ}C,\;1100^{\circ}C\;and\;1150^{\circ}C$. When the nitrogen is permeated from surface to interior, Nb and Cr, which have strong affinities with nitrogen, also move from interior to surface. Therefore it is considered that this counter-current of atoms promotes the formation of NbCrN at the surface layer.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.