• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.625-633
• /
• 2007

We isolated a new extracellular alginate lyase-producing microorganism, which displayed alginate-depolymerizing activity in plate assays, from coastal soils in Wando, Jeollanam-do, Korea. This alginate-depolymerizing bacterium belonged to the genus Streptomyces and it was named Streptomyces sp. MET 0515. An extracellular alginate lyase(ALY1) secreted by Streptomyces sp. MET 0515, was purified to homogeneity by a combination of acetone precipitation, anion-exchange chromatography (Q-Sepharose and DEAE-Sepharose) and Sephacryl S-200 HR gel filtration chromatography. Its molecular mass was 26 kDa as determined by SDS-PACE analysis. The enzyme had an optimal temperature of $70^{\circ}C$ for its activity, and was most active at pH 7.5. The thermal and pH stability were $0-50^{\circ}C$, and pH 6.0-9.0, respectively. The enzyme activity was stimulated by 1mM $Mn^{2+}$, and inhibited by 1mM $Fe^{3+}$, 1mM EDTA and 1mM $Zn^{2+}$. Preliminary analysis of substrate specificity showed that this alginate lyase had activity on both poly-alpha 1,4-L-guluronate and poly-beta 1,4-D-mannuronate in the alginate molecule.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.22-26
• /
• 2014

$(Ba_{0.85}Ca_{0.15})(Ti_{0.9}Zr_{0.1})O_3$ + 0.04 wt% $CeO_2$ lead-free ceramics were prepared by conventional oxide-mixed method and the effect of sintering temperature on microstructure, dielectric and piezoelectric properties were investigated. Improved piezoelectric properties have been observed at $1,400^{\circ}C$ sintering temperature which show the optimal electrical properties, $k_p{\sim}0.412$, $d_{33}{\sim}316pC/N$, $Q_m{\sim}144$, ${\varepsilon}_r{\sim}3,345$ and $T_c{\sim}85^{\circ}C$. These results show that the sintering temperature plays an important role in piezoelectric properties.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.473-479
• /
• 2020

Endothelial cell injury is a major contributor to cardiovascular diseases. The 2,3,5,4'-Tetrahydroxystilbene-2-O-β-D-Glucoside (TSG) contributes to alleviate human umbilical vein endothelial cells (HUVECs) injury through mechanisms still know a little. This study aims to clarify the TSG effects on gene expression (mRNA and microRNA) related to oxidative stress and endoplasmic reticulum stress induced by H₂O₂ in HUVECs. We found that TSG significantly reduced the death rate of cells and increased intracellular superoxide dismutase activity. At qRT-PCR, experimental data showed that TSG significantly counteracted the expressions of miR-9-5p, miR-16, miR-21, miR-29b, miR-145-5p, and miR-204-5p. Besides, TSG prevented the expression of ATF6 and CHOP increasing. In contrast, TSG promoted the expression of E2F1. In conclusion, our results point to the obvious protective effect of TSG on HUVECs injury induced by H₂O₂, and the mechanism may through miR16/ATF6/ E2F1 signaling pathway.

• Journal of Environmental Impact Assessment
• /
• v.29 no.4
• /
• pp.272-285
• /
• 2020

We investigated statistical evaluation parameters for 3D meteorological and air quality models and selected several quantitative indicator references, and summarized the reference values of the statistical parameters for domestic air quality modeling researcher. The finally selected 9 statistical parameters are MB (Mean Bias), ME (Mean Error), MNB (Mean Normalized Bias Error), MNE (Mean Absolute Gross Error), RMSE (Root Mean Square Error), IOA (Index of Agreement), R (Correlation Coefficient), FE (Fractional Error), FB (Fractional Bias), and the associated reference values are summarized. The results showed that MB and ME have been widely used in evaluating the meteorological model output, and NMB and NME are most frequently used for air quality model results. In addition, discussed are the presentation diagrams such as Soccer Plot, Taylor diagram, and Q-Q (Quantile-Quantile) diagram. The current results from our study is expected to be effectively used as the statistical evaluation parameters suitable for situation in Korea considering various characteristics such as including the mountainous surface areas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.1-8
• /
• 2005

A $0.35\mu$m SiGe BiCMOS fabrication process has been timely developed, which is aiming at wireless RF ICs development and fast growing SiGe RF market. With non-selective SiGe epilayer, SiGe HBTs in this process used trapezoidal Ge base profile for the enhanced AC performance via Ge induced bandgap niuoin. The characteristics of hFE 100, $f_{T}\;45GHz,\;F_{max}\;50GHz,\;NF_{min}\;0.8dB$ have been obtained by optimizing not only SiGe base profile but also RTA condition after emitter polysilicon deposition, which enables the SiGe technology competition against the worldwide cutting edge SiGe BiCMOS technology. In addition, the process incorporates the CMOS logic, which is fully compatible with $0.35\mu$m pure logic technology. High Q passive elements are also provided for high precision analog circuit designs, and their quality factors of W(1pF) and inductor(2nH) are 80, 12.5, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.1010-1016
• /
• 2000

Effect on the bio-mass and nutrient yield of Lemna perpusilla Torry was studied at two nutrient loading frequencies. Six polythene sinks ($6{\times}2{\times}0.5m^{3}$ area) randomly allocated to two treatments having three sinks in each treatment. Each sink containing $6{\times}2{\times}0.35m^{3}$ water body, was changed either daily with 12.6 kg anaerobically fermented cattle manure (effluent) or with 76 kg efluent at six-day interval. Media Kjeldhal-N (40 vs. 36 mg/L; p>0.05) and $NH_3$-N (9 vs 7 mg/L; p<0.05) concentration were higher in daily charged sinks than those charged at six-day interval. However, temperature ($28.48{^{\circ}C}\;vs.\;28.60{^{\circ}C}$) and pH (6.82 vs. 6.84) were sinilar in both groups of sinks. Biomass (93 vs. $80g/m^{2}/d$) and crude protein (1.24 vs. $1.11g/m^{2}/d$) yield were non-significantly (p>0.05) higher in the daily charged than 6-d interval charged ponds. However, dry matter (4.52 vs. 4.15%), organic matter (83 vs. 84%), crude protein (31.4 va. 29.6%) and organic carbon (47 vs. 47%) content were similar in both daily and 6-d interval charged ponds. There were no apparent relationships between the crude protein content of Lemna and the media Kjeldhal-N or $NH_3$-N concentration apparently due to saturated level of nutrient (N in particular). It was concluded that with the level of effluent used for two treatments, nutrient-loading frequency had no significant effect on the biomass and protein yield of Lemna. Technique described here can be used for year-round duckweed production from fermented cattle manure for feeding poultry/fish in smallholder production system.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.1
• /
• pp.69-74
• /
• 1996

Background: The diagnosis of pulmonary embolism (PE) based on clinical findings is often elusive and therefore requires confirmative diagnostic method. Pulmonary angiography, though the gold standard for the diagnosis of pulmonary embolism, is an invasive method and requires trained personnel and special equipment. Lung V/Q scan, on the other hand, is a noninvasive method but the diagnostic specificity and sensitivity arc not satisfactory in case that the results are either intermediate or low probability scan. Plasma D-dimer is generated when a thrombus is fibrinolysed by plasmin and is known to be increased in various thrombotic disorders. The aim of this study was to investigate the value of the determination of plasma D-dimer level in the diagnosis of pulmonary embolism. Methods: Pulmonary angiography was performed in 17 patients who were clinically suspected to have pulmonary embolism. 9 patients(PE, $56{\pm}13.4$ yrs, M:F=8:1) were diagnosed to have pulmonary embolism by pulmonary angiography. The control group were the 8 patients with negative pulmonary angiography and 13 orthopedic patients with no evidence of pulmonary embolism on scintigraphic and impedance plethysmographic studies(n=21) (non-PE, $54.5{\pm}11.1$ yrs, M:F=11:10). Plasma D-dimer was measured by latex agglutination method in study subjects and the results were analyzed according to the presence or absence of pulmonary embolism. Results: 1) The increased level of plasma D-dimer was more frequently observed in the patients with pulmonary embolism than in the controls(>0.5 mg/L, 8 in PE, 10 in non-PE; <0.5 mg/L, 1 in PE, 11 in non-PE, p=0.049). 2) The diagnostic value of plasma D-dimer level higher than 0.5 mg/L were as follows: sensitivity 88.9%(8/9), specificity 52.4%(11/21), positive predictive value 44.4%(8/18), and negative predictive value 91.7%(11/12). Conclusion: Plasma D-dimer determination showed high sensitivity and negative predictive value in the diagnosis of pulmonary embolism and is therefore thought to be useful in excluding the possibility of pulmonary embolism.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.255-262
• /
• 2013

The boltzmann equation is based on the particle distribution function while the Navire-Stokes equation based on the continuum theory. In order to simulate free surface flow, this paper used the Lattice Boltzmann Method of which is the discretized form. The detail study on the characteristics of the Lattice Boltzmann Method for the free surface simulation was investigated. The developed code was validated with the traditional dam breaking problem by tracking the front position of the water. A basic roles of density functions in the Lattice Boltzmann Method is discussed. To have an engineering applications, the simulation is also conducted the free surface behavior with an arbitrary wall geometry.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.5-10
• /
• 1997

The aluminum was recovered from the middle size (Q1.0-12.0 mm) aluminum drosses using NaCl and KC1 mixuture as a basic salt flux. The maximum aluminum recovery was about 76.9% when 40% basic salt flux was added to aluminum dross at 850$^{\circ}$C for two hours. Also, aluminum remvery increased with increasing fluoride (1%-5%) addition to basic salt flux. But, there was no considerable effect due ta the increasing of viscosity when the fluorides were added over 5%, respectively. E s p d y , the most aluminum recovery was about 83.5% when 5% cryolite was added to 40% basic salt flux.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.185-188
• /
• 2003

Data on the use of breeding records of dairy cattle farm of Fenghuang-shan in Chengdu areas during a period of six years is systematically analyzed. The results show that Holstein heifers have their 1st estrus at an average age of $513.6{\pm}46.7$ d which is not related to the calving season. Estrus mostly occurs in the months with mild ambient temperature (March, April, May, November and December). There is a very poor rate of estrus detection; only 30.0% successive estrus is observed within 24 d, 29.3% within 25-48 d, 40.6% over 48 d. The average number of insemination per conception is 1.50 for heifers and 1.74 for cows, but conception rate (CR) is lower in the relatively warm months (July, August and September) ranged from 48.1% to 51.9% compared with 58.1% to 68.5% in other months. High temperature is the most important factor affecting fertilization in warm months, but neither did CR decline immediately with the increased air temperature in June, nor did it increase immediately with the declined air temperature in September. Post partum anestrous period is $119.5{\pm}60.5$ d. The average interval from calving to conception is $159.4{\pm}85.6$ d with only 19.8% of the cows conceived within 85 d of calving. Cows with high milk yield have longer acyclic periods and lower conception rates. Improvement of efficient managements must be a precedent condition in Chengdu areas.