• 제목/요약/키워드: D2 isotope

검색결과 220건 처리시간 0.027초

Development of analytical method for the isotope purity of pure D2 gas using high-precision magnetic sector mass spectrometer

  • Chang, Jinwoo;Lee, Jin Bok;Kim, Jin Seog;Lee, Jin-Hong;Hong, Kiryong
    • 분석과학
    • /
    • 제35권5호
    • /
    • pp.205-211
    • /
    • 2022
  • Deuterium (D) is an isotope with one more neutron number than hydrogen (H). Heavy elements rarely change their chemical properties with little effect even if the number of neutrons increases, but low-mass elements change their vibration energy, diffusion rate, and reaction rate because the effect cannot be ignored, which is called an isotope effect. Recently, in the semiconductor and display industries, there is a trend to replace hydrogen gas (H2) with deuterium gas (D2) in order to improve process stability and product quality by using the isotope effect. In addition, as the demand for D2 in industries increases, domestic gas producers are making efforts to produce and supply D2 on their own. In the case of high purity D2, most of them are produced by electrolysis of heavy water (D2O), and among D2, hydrogen deuteride (HD) molecules are present as isotope impurities. Therefore, in order to maximize the isotope effect of hydrogen in the electronic industry, HD, which is an isotope impurity of D2 used in the process, should be small amount. To this end, purity analysis of D2 for industrial processing is essential. In this study, HD quantitative analysis of D2 for high purity D2 purity analysis was established and hydrogen isotope RM (Reference material) was developed. Since hydrogen isotopes are difficult to analyze with general gas analysis instrument, they were analyzed using a high-precision mass spectrometer (Gas/MS, Finnigan MAT271). High purity HD gas was injected into Gas/MS, sensitivity was determined by a signal according to pressure, and HD concentrations in two bottles of D2 were quantified using the corresponding sensitivity. The amount fraction of HD in each D2 was (4518 ± 275) μmol/mol, (2282 ± 144) μmol/mol. D2, which quantifies HD amount using the developed quantitative analysis method, will be manufactured with hydrogen isotope RM and distributed for quality management and maintenance of electronic industries and gas producers in the future.

Deuterium Isotope Effects on the $^{13}C$ Chemical Shifts of Cyclooctanone-2-D

  • 정미원
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권8호
    • /
    • pp.836-840
    • /
    • 1998
  • The intrinsic and equilibrium isotope effects on the 13C NMR chemical shift of the cyclooctanone-2-D were investigated. Equilibrium constants and changes in the free energies, enthalpy, entropy, which are derived from the temperature dependence of the isotope shifts, are reported for this isotopomer.

Isotope Selectivity in the CO$_2$Laser Induced Decomposition of Trichloroethylene-H and Trichloroethylene-D

  • 구상만;천병수;추광율
    • Bulletin of the Korean Chemical Society
    • /
    • 제10권1호
    • /
    • pp.96-101
    • /
    • 1989
  • The infrared multiphoton decomposition of trichloroethylene-H(TCE-H) and trichloroehtylene-D(TCE-D) was studied by using the high power $CO_2$ laser. The pressure dependence of TCE-H decomposition showed that the HCl elimination channel to form ClC ≡ CCl was the major step at high pressures, while the HC ≡ CCl formation step became important at low pressures. $Cl_2C$ = CHCl ${\rightarrow}$ (high pressure) ClC ${\equiv}$ CCl + HCl ${\rightarrow}$ (low pressure) HC ${\equiv}$ CCl + 2Cl${\cdot}$($Cl_2$) The IRMPD of TCE-H and TCE-D mixtures with 10P(20) laser line showed that optimum conditions of large isotope selectivity were the low system pressures and high laser powers. The experimentally observed dependence of the branching ratios on the pressure and laser fluence, and the isotope selectivity coefficients were quantitatively explained by using the modified energy grained master equations (EGME) model.

저온에서의 싸이클로옥타논에 대한 고유동위원소 효과 (INTRINSIC NMR ISOTOPE SHIFTS OF CYCLOOCTANONE AT LOW TEMPERATURE)

  • 정미원
    • 분석과학
    • /
    • 제7권2호
    • /
    • pp.213-224
    • /
    • 1994
  • 선택적으로 중수소를 치환시킨 싸이클로옥타논의 여러 동위원소 이성질체들을 합성하였다. 고유동위원소 효과에 의해 영향을 받는 $^{13}C$ NMR 화학적 이동값들을 각 이성질체에 대해 저온에서 계통적으로 관찰하였다. 특히 싸이클로옥타논이 선호하는 안정한 형태 이성질체인 클 boat-chair 형과 연관시켜 이 효과들을 논의하였다.

  • PDF

Experimental validation of a nuclear forensics methodology for source reactor-type discrimination of chemically separated plutonium

  • Osborn, Jeremy M.;Glennon, Kevin J.;Kitcher, Evans D.;Burns, Jonathan D.;Folden, Charles M. III;Chirayath, Sunil S.
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.384-393
    • /
    • 2019
  • An experimental validation of a nuclear forensics methodology for the source reactor-type discrimination of separated weapons-useable plutonium is presented. The methodology uses measured values of intra-element isotope ratios of plutonium and fission product contaminants. MCNP radiation transport codes were used for various reactor core modeling and fuel burnup simulations. A reactor-dependent library of intra-element isotope ratio values as a function of burnup and time since irradiation was created from the simulation results. The experimental validation of the methodology was achieved by performing two low-burnup experimental irradiations, resulting in distinct fuel samples containing sub-milligram quantities of weapons-useable plutonium. The irradiated samples were subjected to gamma and mass spectrometry to measure several intra-element isotope ratios. For each reactor in the library, a maximum likelihood calculation was utilized to compare the measured and simulated intra-element isotope ratio values, producing a likelihood value which is proportional to the probability of observing the measured ratio values, given a particular reactor in the library. The measured intra-element isotope ratio values of both irradiated samples and its comparison with the simulation predictions using maximum likelihood analyses are presented. The analyses validate the nuclear forensics methodology developed.

The Studies on Substituent and Kinetic Solvent Isotope Effect in Solvolyses of Phenyl Chloroformates

  • 구인선;이지선;양기열;강금덕;이익춘
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권5호
    • /
    • pp.573-576
    • /
    • 1999
  • The rate constants and kinetic solvent isotope effects (KSIE, KMeOH/kMeOD) for solvolyses of para-substituted phenylchloroformates in CH3OH, CH3OD, H2O, D2O, 50% D2O-CH3OD were determined at 15.0 and 25.0℃ using conductometric method. Kinetic solvent isotope effects for the solvolyses of para-substituted phenyl chloroformates were 2.39-2.51, 2.21-2.28, and 1.67-1.69 for methanol, 50% aqueous methanol, and water, respectively. The slopes of Hammett plot for solvolysis of para-substituted phenyl chloroformates in methanol, 50% aqueous methanol, and water were 1.49, 1.17 and 0.89, respectively. The Hammett type plot of KSIE, log (KSIE) versus p, can be a useful mechanistic tool for solvolytic reactions. The slopes of such straight lines for para-substituted phenyl chloroformates are almost zero in methanol, 50% aqueous methanol, and water. It was shown that the reaction proceeds via an associative SN2 and/or general base catalysis addition-elimination (SAN) mechanism based on activation parameters, Hammett p values, and slopes of Hammett type plot of KS-IE.

Theoretical Study of Isotope and Cation Binding Effects on the Hydration of BDNA

  • Kang, Young-Kee;Jhon, Mu-Shik
    • Bulletin of the Korean Chemical Society
    • /
    • 제2권1호
    • /
    • pp.24-28
    • /
    • 1981
  • Theoretical studies of the sodium cation binding and the isotope hydration effects on the static model compound B-DNA have been qualitatively elucidated by using empirical potential energy functions. In the first place, the sodium cations bound to phosphate anions and their hydration scheme have been optimized and have given a reasonable agreement with other theoretical results and experimental studies. In the second stage, the isotope effect on the hydration through the substitution of $D_2O\;for\;H_2O$ has been carried out by the same procedure. The stabilization of B-DNA has been explained and compared in terms of the sodium cation binding to phosphate anions and its hydration in both cases of $H_2O\;and\;D_2O$.

삼기층(三紀層)에 배태(胚胎)된 벤토나이트의 산소(酸素) 및 수소동위원소(水素同位元素) 연구(硏究) (Hydrogen and Oxygen Isotopic Compositions of Tertiary Montmorillonites in Southern Korea)

  • 문희수
    • 자원환경지질
    • /
    • 제19권spc호
    • /
    • pp.131-138
    • /
    • 1986
  • Hydrogen and oxygen isotope ratios of thirteen of the under 2 micron size fraction of the montmorillonites were measured. The oxygen isotopic compositions of these samples range from + 17.0 to +25.1 permil and the hydrogen isotope compositions range from -47.5 to -65.8 permil with an average standard deviation of 0.7 and 2.7 permil, respectively. The oxygen isotope compositions show a positive relationship with stratigraphy whereas the hydrogen isotope compositions do not. It suggest that the montmorillonite attained isotopic equilibrium at the maximum burial depth and ratained their oxygen isotope composition on subsequent uplift. Possibilities of montmorillonite formation by weathering or hydrothermal alteration of volcanic material are eliminated by the ${\delta}D$ and ${\delta}^{18}O$ values of these samples. Calculated formation temperature lie between 29 to $80^{\circ}C$.

  • PDF