• 한국주조공학회지
• /
• 제25권1호
• /
• pp.16-22
• /
• 2005

This study aims to investigate the effects of the microstructures and nodule type on the fatigue characteristics of cast iron. Fatigue tests were carried out in tension-tension mode using a servo-hydraulic testing machine with load control mode operating at a frequency of 15 Hz. The tests were conducted at stress ratio R=Kmin/Kmax, of 0.1. Initial crack ${\Dalta}K$ values were highly performed with increase in tensile strength of DCI fatigue specimens. ${\Dalta}K_{th}$ region, fatigue crack propagation was primarily advanced through cell boundary and in periphery of near nodule. Fatigue crack propagation rate of D2 consisted with 2Phase(Ferrite+Pearlite) was slow due to crack closure enhanced by crack deflection and occurred crack branching. The generation of crack branch was occurred due to interaction of crack-nodule. At Threshold and Paris zone, the fractographs of the fatigue fracture surface for DCI show typical striations of a ductile fracture and isolated cleavage planes near graphite. The effect of microstructure on fatigue crack propagation of GC strongly depends on the type of flake. The generation of crack branch occurred due to interaction of crack-nodule. The fractographs of the fatigue fracture surface for GC show cleavage plane along the flake graphite.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.258-258
• /
• 2014

Spark discharge in water generates shockwaves which have been utilized to generate mechanical actuation for potential use in pumping application. Discharge pulses of several microseconds generate shockwaves and vapor bubbles which subsequently displace the water for a period of milliseconds. Through the use of a sealed discharge chamber and metal bellow spring, the fluid motion can be used create an oscillating linear actuator. Continuous actuation of the bellow has been demonstrated through the use of high frequency spark discharge. Discharge in water forms a region of high electric field around the electrode tip which leads to the creation of a thermal plasma channel. This process produces fast thermal expansion, vapor and bubble generation, and a subsequent shockwave in the water which creates physical displacement of the water [1]. Previous work was been conducted to utilize the shockwave effect of spark discharge in water for the inactivation of bacteria, removal of mineral fouling, and the formation of sheet metal [2-4]. Pulses ranging from 25 to 40 kV and 600 to 900 A are generated inside of the chamber and the bellow motion is captured using a slow motion video camera. The maximum displacements measured are from 0.7 to 1.2 mm and show that there is a correlation between discharge energy input to the water and the displacement that is generated. Subsequent oscillations of the bellow are created by the spring force of the bellow and vapor in the chamber. Using microsecond shutter speed ICCD imaging, the development of the discharge bubble and spark can be observed and measured.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권1호
• /
• pp.52-59
• /
• 2006

Purpose: The purpose of this study was to evaluate the influence of apical-coronal implant position on the stress distribution after occlusal and oblique loading. Materials and Methods: The cortical and cancellous bone was assumed to be isotropic, homogeneous, and linearly elastic. The implant was apposed to cortical bone in the crestal region and to cancellous bone for the remainder of the implant-bone interface. The cancellous core was surrounded by 2-mm-thick cortical bone. An axial load of 200 N was assumed and a 200-N oblique load was applied at a buccal inclination of 30 degrees to the center of the pontic and buccal cusps. The 3-D geometry modeled in Iron CAD was interfaced with ANSYS. Results: When only the stress in the bone was compared, the minimal principal stress at load Points A and B, with a axial load applied at 90 degrees or an oblique load applied at 30 degrees, for model 5. The von Mises stress in the screw of model 5 was minimal at Points A and B, for 90- and 30-degree loads. When the von Mises stress of the abutment screw was compared at Points A and B, and a 30-degree oblique load, the maximum principal stress was seen with model 2, while the minimum principal stress was with model 5. In the case of implant, the model that received maximum von Mises stress was model 1 with the load Point A and Point B, axial load applied in 90-degree, and oblique load applied in 30-degree. Discussion and Conclusions: These results suggests that implantation should be done at the supracrestal level only when necessary, since it results in higher stress than when implantation is done at or below the alveolar bone level. Within the limited this study, we recommend the use of supracrestal apical-coronal positioning in the case of clinical indications.

• 천문학회보
• /
• 제43권2호
• /
• pp.46.1-46.1
• /
• 2018

The Fast Imaging Solar Spectrograph (FISS) on the Goode Solar Telescope (GST) at Big Bear Solar Observatory is the imaging Echelle spectrograph developed by the Solar Astronomy Group of Seoul National University and the Solar and Space Weather Group of Korea Astronomy and Space Science Institute. The instrument takes spectral data from a region on the Sun in two spectral bands simultaneously. The imaging is done by the organization of intensity data obtained from the fast raster scan of the slit over the field of view. Since the scan repeats many times, the whole set of data can be used to construct the movies of monochromatic intensity at arbitrary wavelengths within the spectral bands, and those of line-of-sight velocity inferred from different spectral lines. So far there are two standard observing configurations: one recording the $H{\alpha}$ line and the Ca II 8542 line simultaneously, and the other recording the Na I D2 line and Fe I 5435 line simultaneously. We have developed the procedures to produce the standard data for each observing configuration. The procedures include the spatial alignment, the correction of spectral shift of instrumental origin, and the lambdameter measurement of the line wavelength. The standard data include the movie of continuum intensity, the movies of intensity and velocity inferred from a chromospheric spectral line, the movies of intensity and velocity inferred from a photospheric line. The processed standard data will be freely available online (fiss.snu.ac.kr) to be used for research and public outreach. Moreover, the IDL procedures will be provided on request as well so that each researcher can adapt the programs for their own research.

• 지역연구
• /
• 제31권4호
• /
• pp.47-69
• /
• 2015

본고에서는 각 지역의 역외 인재 유인환경(Magnet요소) 및 역내 인재 양성환경(Incubator요소)을 통해 인재유인잠재력지수(Talent Magnet Potential Index, TMPI)를 산출함으로써 지역분포와 그 특성을 파악하고자 하였다. 그 결과 서울, 대전, 경기, 울산 등이 1~4위의 상위권을 차지하여 지식기반서비스업 및 R&D역량, 그리고 제조업의 비중이 높은 지역에서 TMPI의 수준이 높은 것으로 나타났다. 또한 4개로 분류한 인재유인력 지역유형에서는 유형I(인재비교우위형)과 유형III(인재절대부족형)의 누적적 효과로 인해 향후 이들 지역 간의 경제격차 확대가 예상된다. 더불어 광역시 중심의 유형IV(역내 인재의존형)의 경우는 인재양성역량은 우수하나 유형I 또는 유형II(역외인재의존형)으로의 인재 유출이 우려된다. 본고는 TMPI의 타당성 검증을 위해 상관관계를 실시한 결과, 16개 시도 대상의 유형별 인재와 TMPI 간 상관성은 매우 높은 것으로 나타났으며, 특히 2T와의 상관계수가 가장 높은 것으로 나타나 그간 상대적으로 경시된 관용성 부문이 인재의 유인 및 양성에 크게 기여하고 있음을 새로이 확인하였다. 그러나 인재가 집중하는 서울을 제외한 15개 시도 대상의 상관관계는 다른 양상을 보였다. 마지막으로 이러한 주요 분석결과를 토대로 지역의 인재 확보를 위한 정책과제를 제안하였다.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.353-359
• /
• 2015

본 연구는 실제 아파트 단지의 재생이 필요한 환경 인프라를 경제적이고 효율적인 녹색 인프라 기술로 재생하기 위한 계획을 수립하였으며, 단지내 물과 폐기물의 자원 순환 및 재이용을 위해 단지형 도시 중수 생산 기술과 단지형 유기성 폐기물 에너지화 기술, 무막힘 탄성포장 우수 재이용 기술, 도시농장 기술을 현장에 적용한 결과를 보여주고 있다. 도심 중수 생산 기술은 하수, 우수, 지하수를 대상으로 중수를 생산하여 단지내 공공용수로 이용하기 위한 기반 기술이며, 무막힘 탄성포장 우수배수구 기술은 단지 내에서 우수의 재이용율 극대화시키기 위한 기반 기술이다. 유기성 폐기물 에너지화 기술은 단지에서 발생하는 음식폐기물 및 분뇨 등의 유기성 폐기물을 처리하는 과정에서 바이오가스와 비료를 만들어 에너지원으로 활용할 수 있으며, 도시농장은 재생용수, 재생에너지, 재생비료를 활용하여 주거민들의 건강 및 여가공간으로 활용할 수 있는 기반기술이다. 이를 통해 단지 내에서 자원 순환 및 재이용이 가능한 하나의 에코시스템을 구축하였으며, 재생 후 녹색지표결과에서 에너지 부문은 4.23, 물부문은 0.32, 폐기물 부문은 0, 토지이용 부문은 0, 환경부문은 2.12가 상승하는 결과를 가져올 수 있었다.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.105-113
• /
• 2009

관측된 파형의 특성들을 해석하여 굴절파와 광각으로 도달한 반사파를 분석하면 결과물로 얻어지는 지각구조 모델의 신뢰도를 향상시킬 수 있으며, 균일한 격자상의 그래프 이론에 기반한 파면법은 복잡한 구조에서도 주시와 파선경로를 효과적으로 계산할 수 있으나, 기본적으로 초동만을 이용하게 되는 단점이 있다. 이번 연구에서는 초동뿐만 아니라 후기 시간대에 도달하는 반사파와 굴절파 및 변환된 P파와 5파의 주시와 파선경로를 계산하기 위하여 다층 모델상에서 표현되는 slowness network 노드에 기반한 수정 파면법을 이용하는 새로운 알고리즘을 개발하였다. 새로운 알고리즘을 통해 모호면의 형태와 변환된 P파와 S파의 위상을 획득하기 위하여 후기 시간대의 Pg파, Pn파 이후에 들어오는 강한신호의 파, 모호면에서 중첩된 PmP를 분석하였다. 제안된 알고리즘의 효용성을 검증하기 위하여 해양-대륙의 전이대와 해령 및 해산에 러한 모델링 연구를 수행하였으며, 2차원 유한차분법을 이용한 수치모형을 통해 그 효용성을 확인하였다. 초동 주시만을 해석에 사용할 경우 대륙-해양 전이대와 해령 및 해산과 같은 모델에서 획득되는 도달파들과 파선경로들의 특성이 각기 다르게 나타나 많은 해석상의 오류가 발생할 수 있는 위험성이 있기 때문에 제안된 기법을 통해 효과적인 해석을 수행할 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.241-241
• /
• 2007

We fabricated SmBCO coated conductors(CCs) on IBAD-MgO templates using co-evaporation method. IBAD-MgO templates consist of PLD-LMO/epi-MgO/IBAD-MgO/Ni-alloy and showed good in-plane texture of below FWHM 7 degree. Evaporation rates of Sm, Ba, and Cu were precisely controlled to get the optimum composition ratio after deposition process. To optimize the oxygen partial pressure of reaction region, wide range of the partial pressure was investigated from 1 mTorr to 15 mTorr. By reducing the oxygen partial pressure to 5mTorr, (103)grains in SmBCO layer have been increased. On the other hand, there were only (001)grains in SmBCO layer deposited at 15 mTorr $O_2$. Deposition temperature was also investigated from $600^{\circ}C\;to\;800^{\circ}C$ to make high Ic SmBCO CCs. SmBCO on IBAD MgO template showed that the Ic increased gradually at higher growth temperature to $800^{\circ}C$, which the highest Jc and Ic is $2.6\;MA/cm^2$ and 500 A/cm-w., respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권4호
• /
• pp.521-525
• /
• 2006

The present study was undertaken to evaluate the effect of flushing of ewes with concentrate pellets just before the mating season on their nutrient utilization and reproductive performance on farms. Forty-eight Malpura ewes, 1-5 years old were randomly divided into 2 groups of 24 each (G1and G2). Ewes in both the groups were grazed on natural rangeland from 07.00 to 18.00 hr followed by night shelter in animal shed. G1 ewes were maintained on sole grazing while G2 ewes, in addition to grazing, received concentrate pellets at the rate of 1.5% of their body weight. The mean biomass yield of the community rangeland was 0.46 ton DM/hectare. The intakes of DM (g/kg $W^{0.75}$), DCP (g/kg $W^{0.75}$) and ME (MJ/kg $W^{0.75}$) were higher (p<0.01) in G2 as compared to that of G1 being 86.5, 10.2 and 1.15 and 57.5, 4.7 and 0.75, respectively. The digestibility of DM, OM, CP, NDF and hemicellulose were also higher (p<0.01) in G2 as compared to that of G1 being 57.2, 76.7, 78.9, 51.9 and 81.6 and 50.8, 68.7, 68.4, 45.4 and 74.4, respectively. The conception rate was higher (79.2%) in flushed ewes as compared to that of non-flushed (66.7%). Five of the pregnant ewes died and another 5 aborted in G1 while in G2, 5 ewes aborted with no mortality. The lambing was higher (73.7%) in G2 than that in G1 (37.5%). The birth weight of lambs was higher (p<0.05) in G2 (3.47 kg) than that in G1 (2.95 kg). Further, the birth weight of male lambs was higher (3.28) than that of female lambs (3.14). It is concluded that the biomass yield of the community rangeland in semi-arid region of India is low and insufficient to meet the nutrient requirement of ewes prior to mating season. However, concentrate supplementation at the rate of 1.5% of body weight to ewes during this critical stage enhanced their plane of nutrition, reproductive performance, body condition and birth weights of lambs.

• Journal of Microbiology and Biotechnology
• /
• 제30권1호
• /
• pp.38-43
• /
• 2020

Hand, foot, and mouth disease (HFMD) is caused by enterovirus 71 (EV71) in infants and children under six years of age. HFMD is characterized by fever, mouth ulcers, and vesicular rashes on the palms and feet. EV71 also causes severe neurological manifestations, such as brainstem encephalitis and aseptic meningitis. Recently, frequent outbreaks of EV71 have occurred in the Asia-Pacific region, but currently, no effective antiviral drugs have been developed to treat the disease. In this study, we investigated the antiviral effect of salvianolic acid B (SalB) on EV71. SalB is a major component of the Salvia miltiorrhiza root and has been shown to be an effective treatment for subarachnoid hemorrhages and myocardial infarctions. HeLa cells were cultured in 12-well plates and treated with SalB (100 or 10 ㎍/ml) and 10⁶ PFU/ml of EV71. SalB treatment (100 ㎍/ml) significantly decreased the cleavage of the eukaryotic eIF4G1 protein and reduced the expression of the EV71 capsid protein VP1. In addition, SalB treatment showed a dramatic decrease in viral infection, measured by immunofluorescence staining. The Akt signaling pathway, a key component of cell survival and proliferation, was significantly increased in EV71-infected HeLa cells treated with 100 ㎍/ml SalB. RT-PCR results showed that the mRNA for anti-apoptotic protein Bcl-2 and the cell cycle regulator Cyclin-D1 were significantly increased by SalB treatment. These results indicate that SalB activates Akt/PKB signaling and inhibits apoptosis in infected HeLa cells. Taken together, these results suggest that SalB could be used to develop a new therapeutic drug for EV71-induced HFMD.