• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.9
• /
• pp.725-733
• /
• 2002

In this study, the heat transport limitations of a two-phase closed thermosyphon were investigated. For the test, a two-phase closed thermosyphon ($L_t/: 600 mm,\;L_e:105mm,\;L_a:75mm,\;L_c:420mm,\;D_o:22.2mm,$ container: copper (inner grooved surface), working fluid: PFC ($C_6F_14$) was fabricated with a reservoir that can change the fill charge ratio. The following was imposed as the factors on the heat transport limitations of a two-phase closed thermosyphon. 1) Fill charge ratio of the working fluid. 2) Tilt angle of the longitudinal axis. From tile experimental data, some results were obtained as follows. When the fill charge ratio was relatively small ($\psi$20%), the heat transport limitation occurred about 100W by dry-out limitation. However over 40%, it shelved nearly constant value (500 W) by flooding limitation. The heat transport limitation according to the tilt angle increased smoothly until the tilt angle was $60^{\circ}$,/TEX>, after then decreased slowly.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.6
• /
• pp.790-796
• /
• 2015

The objective of this study was to investigate the physicochemical properties and antioxidant activities of seven (A, B, C, D, E, F, G) commercial ketchups marketed in Korea. The 70% ethanol extracts were prepared and evaluated for total phenolic content, DPPH and ABTS radical scavenging activities, and metal chelating effect. pH ranged from 3.64 to 3.94, and soluble solid and reducing sugar contents of samples were 2.21~3.51oBrix and 4.78~13.45%, respectively. Salinity of samples was in the range of 1.79 to 3.21%, and sample G showed the lowest salinity. The lightness, redness, and yellowness of the Hunter color system of samples were 15.42~19.94, 18.55~23.98, and 20.87~24.34, respectively. The phenolic contents ranged from 1.37 to 2.60 mg GAE (gallic acid equivalents)/g, with samples F and G exhibiting the highest contents. Antioxidant activity determined based on DPPH and ABTS radical scavenging activities, and metal chelating effects were 45.10~90.87, 55.35~92.53, and 71.10~92.20%, respectively, at a concentration of 200 mg/mL. Samples A and G showed higher antioxidant activity than other samples. There were positive correlations between phenolic contents and antioxidant activity, suggesting that phenolic compounds are the major contributors to antioxidant activity.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1881-1883
• /
• 2005

In this study, PZT thin films were fabricated using sol-gel Processing onto $Si/SiO_2/Ti/Pt$ substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C$, $650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}\;A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1562-1564
• /
• 2003

In this study, PZT thin films were fabricated using sol-gel processing onto Si/$SiO_2$/Ti/Pt substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C,\;650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.59-61
• /
• 2005

In this paper, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, $Pb[(Mn_{1/3},Nb_{2/3})_{0.07}(Zn_{1/3}Nb_{2/3})_a(Zr_{0.48}Ti_{0.52})_{1-0.07-a}O_3]$ ceramics were manufactured with the variations of PZN from 2 to 14mol% and their dielectric and piezoelectric properties were investigated. Sintering temperature was varied from 910 to $1000^{\circ}C$. At 8mol% PZN substituted specimen sintered at $970^{\circ}C$, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant and peizoelectric constant($d_{33}$) showed the optimal values of 0.536, 1803, 1551 and 328[pC/N), respectively, for multilayer piezoelectric transformer application.

• Korean Journal of Pharmacognosy
• /
• v.24 no.4
• /
• pp.282-288
• /
• 1993

Very little utilization of the fruits of Malus baccata(Rosaceae) has been employed for food and medicinal plants except for preparing fruit beverages. But, it was estimated as valuable to investigate the chemical components for the botanical resource of this plant. In this study, it was found that the fruits of this plant contained primary long chain alcohol, ${\beta}-sitosterol$, campesterol, ursolic acid and ${\beta}-_D-glucosides$ of ${\beta}-sitosterol$ and campesterol. However, phloretin(dihydrochalcone) and its 5-O-glucoside(phloridzin) known as plant growth regulators in many Rosaceae plants were not found in this plant material by co-TLC analysis with authentic specimens. Although plant sex hormone, estrone, was often contained in relates of M. baccata, e.g., Prunus spp., Crataegus spp. and Malus spp., this compound was not detected in this fruit by comparison with an authentic material. By RIC chromatography, it was suggested that the Soxhlet extraction by the solvent of ether was excellently useful to extract ursolic acid efficiently.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.627-633
• /
• 2008

The austenitic Fe-Mn alloys have received considerable attention as a possible candidate for the automotive structural materials due to their high strength and high formability with high elongation. This research investigates the effect of alloying elements on the phase transformation, deformation behavior and mechanical properties in high Mn steels for the development of a high strength high ductility steel. The mechanical stability of austenitic phases is very important for high ductility and it depends largely on the composition of carbon, manganese and aluminum. The dominant deformation mode shifts from TRIP to TWIP mode as the amount of C, Mn and Al is increased. Especially, even a small amount of Al addition facilitates significantly TWIP deformation due to the increase of stacking fault energy in Fe-Mn alloys, this leads to increase the ductility and also decrease the crack sensitivity.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2019

The pulsed field magnetization of the short-circuited soldered double pancake coil made of stabilized commercial high-Tc superconductor (HTS) tape is experimentally studied. The evolution of the shielding current induced by the pulsed field and the trapped field after the pulsed magnetization was measured at 77 K. It is shown that the trapped field in the coil is close to the value reached in the field cooling process and reduces weakly at 5-fold increasing of pulsed field amplitude. The current relaxation at t~2 ms after the pulse is defined by the current sharing between the tape's copper coating and the $YBa_2Cu_3O_{7-d}$ layer. In the intermediate time scale (1 s < t < 100 s) the flux creep in HTS layer dominates. At t > 100 s the current's relaxation is defined by the resistance of soldered joint between tapes.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1079-1087
• /
• 2021

NTP-ERSN is a package developed for solving the multigroup form of the discrete ordinates, characteristics and collision probability of the Boltzmann transport equation in one-dimensional cartesian geometry, by combining pin cells. In this work, C5G7 MOX benchmark is used to verify the accuracy and efficiency of NTP-ERSN package, by treating reactor core problems without spatial homogenization. This benchmark requires solutions in the form of normalized pin powers as well as the vectors and the eigenvalue. All NTP-ERSN simulations are carried out with appropriate spatial and angular approximations. A good agreement between NTP-ERSN results with those obtained with OpenMC calculation code for seven energy groups. In addition, our studies about angular and mesh refinements are carried out to produce better quality solution. Moreover, NTP-ERSN GUI has also been updated and adapted to python 3 programming language.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.89-98
• /
• 2018

Koolhaas' perspective on urbanism differs from the modern urbanism and typological urbanism. The Melun-Senart masterplan, La $D{\acute{e}}fense$ masterplan shows unique characteristic different from that of conventional urbanism. The roots of this creative approach can be found in the traits of his research with O.M. Ungers back in the 1970s. Koolhaas and Ungers have collaborated intimately from 1972 to 1977 to work on urban projects. This collaboration reaches its cilmax in their project City in the City, where many of Koolhaas' core concepts such as archipelago, void/solid, plurality, infrastructure, congestion, and social condenser are introduced. This thesis will explore the development of these concepts in their collaboration and shed new light on how this period has made a transition into Koolhaas' perspective on urbanism and architecture as well as his works. The purpose of this study is to investigate these core concepts of Koolhaas in City in the City, and to find the development and the meaning of these concepts in his projects.