• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.62-66
• /
• 2015

The cryostat is designed for the superconducting quadrupole magnets to be used in a heavy-ion accelerator facility. The main accelerator is superconducting linac, which can accelerate a $^{238}U$ beam to 200 MeV/u (Mega electron voltage per nucleon). The cryostat for the magnet employs an innovative design primarily driven by the requirement of the compactness, user-friendliness and reliability. Also, several ancillary requirements such as background field, space restriction due to the beam line and cryostat structure need technical attentions. The development of the cryostat for three quadrupole magnets in the in-flight fragmentation separator is presented in the paper. The concept of cryogenic design is reported and the amount of cryogenic load is estimated by a relevant analysis. The structure of the cryostat to endure the heavy iron yoke including three quadrupole magnets is presented. In addition, the design as well as the performance test of the support link for the cold mass is described.

• 음성과학
• /
• 제8권2호
• /
• pp.61-71
• /
• 2001

Speech material, which is collected from ARS(Automatic Response System), was analyzed and classified into disease and non-disease state. The material include 11 different kinds of diseases. Along with ARS speech, DAT(Digital Audio Tape) speech is collected in parallel to give the bench mark. To analyze speech material, analysis tools, which is developed local laboratory, are used to provide an improved and robust performance to the obtained parameters. To classify speech into disease and non-disease class, multi-layered neural network was used. Three different combinations of 3, 6, 12 parameters are tested to obtain the proper network size and to find the best performance. From the experiment, the classification rate of 92.5% was obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.99-104
• /
• 2001

Effect of mean stress on the fatigue life of natural rubber for engine mount was investigated. Fatigue damage parameter based on the maximum Green-Lagrange strain was employed to account for the effect of mean stress. A procedure to predict the fatigue life of rubber components based on the maximum Green-Lagrange strain method was proposed. Nonlinear finite element analysis and fatigue test of jang-gu shape specimen were conducted to predict the fatigue life of engine mount. Predicted fatigue lives have a good agreement with tested lives within a factor of 3.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1688-1690
• /
• 1996

In this paper, by using the Finite Element Method, we analysed the melting and clearing characteristic of fuse elments shapes. The melting characteristics and the effects of temperature conduction by fuse element shames was studied. We compared the actul testing results by the clearing device with the simulation result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.13-14
• /
• 2008

This paper describes the optimal PSS parameter design for the PSS of EX2000 excitation system. The suggested tuning technique uses the model-based PSS tuning method which have three steps: generation system modeling, determination of PSS parameters, and on-site test. Using this method, the PSS parameters of EX2000 system in Dangjin T/P #4 was designed and verified by linear analysis program, PSS/E, and EMTDC/PSCAD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.15-16
• /
• 2008

This paper describes the on-site PSS Tuning Test of EX2000 excitation of Dangin T/P #4. The on-line 2% AVR step test in 500MW was performed by setting PSS gain from 0 to 15 by 3 increasement. The time-domain measured data was also analyzed by DFT analysis. Finally, the measured data was replicated and verified by running the time-domain dynamic simulation.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.279-292
• /
• 2011

In this paper, we consider anti-periodic solutions of the following BAM neural networks with multiple delays on time scales: $$\{{x^\Delta_i(t)=-a_i(t)e_i(x_i(t))+{\sum\limits^m_{j=1}}c_{ji}(t)f_j(y_j(t-{\tau}_{ji}))+I_i(t),\atop y^\Delta_j(t)=-b_j(t)h_j(y_j(t))+{\sum\limits^n_{i=1}}d_{ij}(t)g_i(x_i(t-{\delta}_{ij}))+J_j(t),}\$$ where i = 1, 2, ..., n,j = 1, 2, ..., m. Using some analysis skills and Lyapunov method, some sufficient conditions on the existence and exponential stability of the anti-periodic solution to the above system are established.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.224-230
• /
• 2009

FIB has been commonly used as a very powerful tool in the semiconductor industry. It is mainly used for mask repair, device correction, failure analysis and IC error correction, etc. Currently, FIB is not being applied to the fabrication of the micro and nano-structured mold, because of low productivity. And also sputtering rate has been required to fabricate 3D shape. In the paper, we studied the FIB-Sputtering rate according to mold materials. And surface roughness characteristics had been analysed for micro or nano mold fabrication. Si wafer, Glassy Carbon, STAVAX and DLC that have been normally considered as good micro or nano mold materials were used in the study.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1071-1075
• /
• 2002

In order to identify and develop the specific DNA marker for the identification of Hanwoo (Korean Cattle) from other breeds, a specific DNA marker of 519 bp was identified and sequenced from polymorphic analysis using RAPD-PCR for 6 cattle breeds. Two different repetitive sequences, $(AAC)_5$ and $(GAAGA)_2$, were selected and designed to use specific probe to develop a DNA marker for Hanwoo specific. When the $(AAC)_5$ probe was applied, the 10 kb specific DNA marker showed in the DNA fingerprinting from 237 of 281 Hanwoo individuals. This novel Hanwoo specific DNA probe is useful to perform the marker-assisted selection for screening Hanwoo purity as an unique genetic source.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.126-131
• /
• 2001

Materials property data are necessary to secure the reliability of failure prevention techniques such as inspection and remaining life assessment of civil infrastructure and industrial facilities. However, there is no properly collected data in Korea, and those foreign data are hard to use because of the scattering of the sources, the difference of standards, etc. In this paper, materials property database system which has been constructed at Korea Research Institute of Standards and Science is introduced. Constructed database contains 145,000 numeric data of materials property for 600 kinds of metals and can be retrieved on the internet. The database system provides graphical user interface-based information searching functions necessary for the life evaluation and safety analysis.