• Korean Journal of Community Nutrition
• /
• v.12 no.4
• /
• pp.440-448
• /
• 2007

The objective of this study is to determine the effectiveness of 16-month milk consumption as a part of the health promotion community program for women in Asan. Subjects included 313 women belonging to the milk group (mean age = 69.1, range $47{\sim}89 y$) and 66 women to the control (mean age=43.6, range $20{\sim}69 y$) group. For those in the milk group, one cup (200 ml) of partially lactose-digested low-fat milk was provided everyday for 16 months. Each subject was interviewed to assess calcium intake by a 24-h recall after fasting blood was obtained for analyzing bone turnover markers, and calcaneus broadband ultrasound attenuation (BUA) was measured by quantitative ultrasound (QUS) on the left heel before and after the milk supplementation. After 16 months, the calcium intake levels changed from 55% of recommended dietary allowance (RDA) to 85% RDA in the milk group and from 73% RDA to 84% RDA in the control group. BUA were reduced from $67.9{\pm}8.1$ to $64.7{\pm}17.5$ dB/MHz for milk and from $90.4{\pm}13.0$ to $87.2{\pm}15.2$ dB/MHz for control groups. Paired t-test showed the changes of BUA for both groups (-3.24 and -3.15 dB/MHz for milk and control groups, respectively) were significant, but the two groups did not show any differences in absolute changes. When post-BUA was analyzed after age, initial BUA and menopausal status were controlled as covariates in ANCOVA model, the milk group showed significantly (p < 0.05) smaller changes than the control group (-3.50 vs -6.71 dB/MHz, respectively). According to a multiple regression analysis, milk consumption and initial BUA showed significant interaction meaning that those with lower initial BUA showed higher milk effects. We conclude that one-cup a day milk consumption for 16 month can prevent further bone loss and significantly improve calcium intake.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1344-1349
• /
• 2004

Titin-cap (TCAP), one of the abundant transcripts in skeletal muscles, was nvestigated in this study in cattle because of its role in regulating the proliferation and differentiation of myoblasts by interacting with the myostatin gene. From the 5, and 3, RACE experiments, full-length TCAP coding sequence was identified, comprising 166 amino acids. The amino acid comparison showed high sequence similarities with previously identified human (95.8%) and mouse (95.2%) TCAP genes. The TCAP expression, addressed by northern blot, is limited in muscle tissues as indicated by Valle et al. (1997). The radiation hybrid analysis localized the gene on BTA19, where the comparative human and porcine counterparts are on HSA17 and SSC12. A few muscle-related genetic disorders were mapped on HSA17 and some growth-related QTLs were identified on SSC12. The bovine TCAP gene found in this study opens up new possibilities for the investigation of muscle-related genetic diseases as well as meat yield traits in cattle.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.97-102
• /
• 2007

Objectives : This study presents a high performance liquid chromatography - electrospray ionization-mass spectrometer (HPLC-MS/MS) methods for the quantitative and qualitative analysis of various active components in Samul-tang, which is composed of four crude herbs. Methods : HPLC-ESI-MS/MS for the determinations of paeoniflorin and 5-HMF (5-hydroxymethyl 2-furaldehyde) in the Samul-tang, the separation method was performed on an COSMOS1L 5C18-AR-Il (2.0 X 150 mm I.D.) column by gradient elution with 0.1% acetic acid and 5% CH3CN in water (A)-0.1% acetic acid and 5% H20 in CH3CN (B) as the mobile phase at a flow-rate of 300 ${\mu}L/min$ with detection at quadrupole mass spectrometer. The all marker substances were always detected as the base peaks in the positive ion mode. Results : The paeoniflorin of Paeoniae Radix in Samul-tang showed a strong base peak [M+H2O]+ in the positive detection mode to give the following as; paeoniflorin (498.109 [M+H2O]+, 479.8 [M]+, 301 [M-glucose]+, 179.3 [glucose]+). Based on the HPLC retnetion time and MS of standard compounds confirmed the identity of active compounds in Rehmanniae Radix Preparata as follows; 5-HMF (127.0[M+H]+, 109.3 [M-OH]+) in the positive ion mode. Conclusion : According to the above results, HPLC-ESI-MS method permits assignment of tentative structures such as paeoniflorin and 5-HMF in the Samul-tang.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.20-28
• /
• 2023

Background: This study aimed to determine the effect of ramen sauce on tooth tone changes over time, after selecting three different ramen colors from the ramens sold in the market, and applying the sauce to bovine teeth. Methods: Healthy bovine teeth were selected, and cutting discs were used to produce 60 specimens (5× 5× 3 mm), with 15 specimens distributed per county. Three types of ramen (buldak, chacharoni black bean sauce, and ottogi curry noodle) were used as the experimental group, and water was used as the negative control group. Tooth tone measurement was performed using a spectrophotometer (CM-700d) to measure the color before and after 1 (3 h 44 min), 2 (7 h 28 min), 3 (11 h 12 min), and 4 weeks (14 h 56 min). Analysis of the color tone change was performed using Statistical Package for the Social Sciences version 28. Results: In the experimental group, there was a significant color tone change before and after immersion. L^* indicated the largest change in black bean sauce ramen, a^* indicated buldak ramen, and b^* indicated the largest change in curry ramen. The amount of color change (∆E^*) was the largest in curry ramen, followed by buldak and black bean sauce ramens. The results of the post-hoc analysis showed significant differences between all groups except buldak and black bean sauce ramens. Conclusion: All three types of ramen revealed significant color change before and after immersion, and curry ramen showed the largest amount of color change among them.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.197-198
• /
• 2008

The forging process produces complicated and designed components in a die at high productivity for mass production and minimizes the machining amount for favorable material utilization; the forging products used at highly stressed sections are well accepted at a wide range of industry such as automobile, aerospace, electric appliance and et cetera. Accordingly, recent R&D activities have been emphasized on improvement of forging die-life and near net shaping technology for cost effectiveness and better performance. Usually closing and consolidation of internal void defects in a ingot is a vital matter when utilized as large forged products. It is important to develop cogging process for improvement of internal soundness without a void defect and cost reduction by solid forging alone with limited press capacity. For experiments of cogging process, hydraulic press with a capacity of 800 ton was used together with a small manipulator which was made for rotation and overlapping of a billet. Size of a void was categorized into two types; ${\phi}$ 6.0 mm and ${\phi}$ 9.0 mm to investigate the change of closing and consolidation of void defects existed in the large ingot during the cogging process. In addition for forming experiment of piston grown air drop hammer with a capacity of 16 ton was used. The experiment with piston crown was carried out to show the formability and void closing status. In this paper systematic configuration for closing process of void defects were expressed based on this experiment results in the cogging process. Also forging defects through forming process for piston crown was improved using the experiment results and FE analysis. Consequently this paper deals with the effect of radial parameters in cogging process on a void closure far large forged products and formability of piston crown.

• Nutrition Research and Practice
• /
• v.17 no.6
• /
• pp.1070-1083
• /
• 2023

BACKGROUND/OBJECTIVES: Sanghuangporus sanghuang (SS) has various medicinal effects, including anti-inflammation and anticancer activities. Despite the extensive research on SS, its molecular mechanisms of action on lung cancer are unclear. This study examined the impact of an SS alcohol extract (SAE) on lung cancer using in vitro and in vivo models. MATERIALS/METHODS: Different concentrations of SAE were used to culture lung cancer cells (A549 and H1650). A cell counting kit-8 assay was used to detect the survival ability of A549 and H1650 cells. A scratch assay and transwell cell invasion assay were used to detect the migration rate and invasive ability of SAE. Western blot analysis was used to detect the expression of B-cell lymphoma-2 (Bcl-2), Bcl2-associated X (Bax), cyclin D1, cyclin-dependent kinases 4 (CDK4), signal transducer and activator of transcription 3 (STAT3), and phosphorylated STAT3 (p-STAT3). Lung cancer xenograft mice were used to detect the inhibiting ability of SAE in vivo. Hematoxylin and eosin staining and immunohistochemistry were used to detect the effect of SAE on the structural changes to the tumor and the expression of Bcl-2, Bax, cyclin D1, CDK4, STAT3, and p-STAT3 in lung cancer xenograft mice. RESULTS: SAE could inhibit lung cancer proliferation significantly in vitro and in vivo without cytotoxicity. SAE suppressed the viability, migration, and invasion of lung cancer cells in a dose and time-dependent manner. The SAE treatment significantly decreased the proapoptotic Bcl-2/Bax ratio and the expression of pro-proliferative proteins Cyclin D1 and CDK4 in vitro and in vivo. Furthermore, SAE also inhibited STAT3 expression. CONCLUSIONS: SAE reduced the cell viability and suppressed cell migration and invasion in human lung cancer cells. Moreover, SAE also exhibited anti-proliferation effects in vivo. Therefore, SAE may have benefits in cancer therapy.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.1
• /
• pp.171-178
• /
• 2017

A series of novel effector molecules secreted by the type three secretion system (T3SS) of Shigella spp. have been reported in recent years. In this study, a proteomic approach was applied to study T3SS effectors systematically. First, proteins secreted by the S. flexneri wild-type strain after Congo Red induction were separated and identified using two-dimensional electrophoresis to display the relative abundance of all kinds of early effectors for the first time. Then, a gene deletion mutant of known virulence repressor (OspD1) and a gene overexpressed mutant of two known virulence activators (MxiE and IpgC) were constructed and analyzed to discover potential late effectors. Furthermore, the supernatant proteins of gene deletion mutants of two known translocators (IpaB and IpaD), which would constantly secrete effectors, were also analyzed. Among all of the secreted proteins identified in our study, IpaH1.4, IpaH_5, and IpaH_7 have not been reported before. These proteomics data of the secreted effectors will be valuable to understand the pathogenesis of S. flexneri.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1042-1049
• /
• 1997

LMFBR(Liquid Metal Fast Breeder Reactor) vessel is operated under the high temperatures of 500-550.deg. C. Thus, transient thermal loads were severe enough to cause inelastic deformation due to creep-fatigue and plasticity. For reduction of such inelastic deformations, Y-piece structure in the form of a thermal sleeve is used in LMFBR vessel under repeated start-up, service and shut-down conditions. Therefore, a systematic method for inelastic analysis is needed for design of the Y-piece structure subjected to such loading conditions. In the present investigation, finite element analysis of heat transfer and inelastic thermal stress were carried out for the Y-piece structure in LMFBR vessel under service conditions. For such analysis, ABAQUS program was employed based on the elasto-plastic and Chaboche viscoplastic constitutive equations. Based on numerical data obtained from the analysis, creep-fatigue damage estimation according to ASME Code Case N-47 was made and compared to each other. Finally, it was found out that the numerical predictio of damage level due to creep based on Chaboche unified viscoplastic constitutive equation was relatively better compared to elasto-plastic constitutive formulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3516-3524
• /
• 1996

Service conditions for structures at elevated temperatures in nuclear power plant involve transient thermal and mechanical load levels that are severe enough to caeuse inelastic deformations due to creep and plasticity. Therefore, a systematic mehtod of inelastic analysis is needed for the design of structural components in nuclear poser plants subjected to such loading conditions. In the present investigation, the Chabodhe model, one of the unified viscoplastic constitutive equations, was selected for systematic inelastic analysis. The material response was integrated based on GMR ( generallized mid-point rule) time integral scheme and provided to ABAQUS as a material subroutine, UMAT program. By comparing results obtaned from uniaxial analysis using the developed UMAT program with those from Runge-Kutta solutions and experimentaiton, the validity of the adopted Chaboche model and the numerical stability and accuracy of the developed UMAT program were verified. In addition, the developed material subroutine was applied for uniaxial creep and tension analyses for the plate with a hole in the center. The application further demonstrates usefulness of the developed program.

• Wind and Structures
• /
• v.11 no.4
• /
• pp.303-321
• /
• 2008

When first commissioned, the 1.6 km span 275kV Severn Crossing Conductor experienced large amplitude vibrations in certain wind conditions, but without ice or rain, leading to flashover between the conductor phases. Wind tunnel tests undertaken at the time identified a major factor was the lift generated in the critical Reynolds number range in skew winds. Despite this insight, and although a practical solution was found by wrapping the cable to change the aerodynamic profile, there remained some uncertainty as to the detailed excitation mechanism. Recent work to address the problem of dry inclined cable galloping on cable-stayed bridges has led to a generalised quasi-steady galloping formulation, including effects of the 3D geometry and changes in the static force coefficients in the critical Reynolds number range. This generalised formulation has been applied to the case of the Severn Crossing Conductor, using data of the static drag and lift coefficients on a section of the stranded cable, from the original wind tunnel tests. Time history analysis has then been used to calculate the amplitudes of steady state vibrations for comparison with the full scale observations. Good agreement has been obtained between the analysis and the site observations, giving increased confidence in the applicability of the generalised galloping formulation and providing insight into the mechanism of galloping of yawed and stranded cables. Application to other cable geometries is also discussed.