• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.27-30
• /
• 2004

Clad wire , which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used the telecommunications, electric-electronic and military technology industries, among others. It is important to obtain uniform coated rate when producing clad wires. Clad wire drawing process can be influenced on damage and coated rate of core and sleeve by process variables as semi-die angle and reduction in area. Therefore, in this study, the finite-element results established in previous study is used to analyze the effect of the various forming parameters, which included the semi-die angle, reduction in area etc. The coated rate will be predicted with observation copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.170-173
• /
• 2009

In this paper, we propose a fast intra prediction mode selection method in Scalable Video Coding(SVC) which is an emerging video coding standard as an extension of H.264/Advanced Video Coding(H.264/AVC). The proposed method decides a candidate intra prediction mode based on the characteristic of macroblock smoothness. Statistical analysis is applied to computing that smoothness in spatial enhancement layer. We also propose an early termination scheme for Intra_BL mode decision where the RD cost value of Intra_BL is utilized. Compared with JSVM software, our scheme can reduce about 55% of the computation complexity of intra prediction on average, while the performance degradation is negligible; For low QP values, the average PSNR loss is very negligible, equivalently the bit rate increases by 0.01%. For high QP values, the average PSNR loss is less than 0.01dB, which equals to 0.25% increase in bitrate on average.

• 전자통신동향분석
• /
• 제30권1호
• /
• pp.12-20
• /
• 2015

1980년대 초 1세대 아날로그 이동통신시스템이 처음 도입된 이래 이동통신은 2세대, 3세대를 거쳐서 4세대 시스템으로 진화되었다. 기존의 이동통신은 주로 가정, 사무실 등 보행자 중심의 Nomadic 환경에 최적화된 형태이고 120km/h 이상의 고속환경에서는 통신접속이 끊어지지 않는 정도의 서비스에 한정되었다. 2007년 애플의 iPhone이 출현한 이래 스마트폰 중심의 모바일 데이터 서비스 사용량이 매년 가파른 증가세를 보이고 있으며 보행자 중심의 저속환경뿐만 아니라 지하철, 고속철 등 그룹이동체 내에서의 모바일 데이터 서비스도 점차 중요해지고 있다. 그룹이동체 내에서 일반 사용자들은 차량 외부의 이동통신망을 통해 직접 서비스를 받을 수도 있고 이동무선백홀과 결합된 WLAN 혹은 펨토셀과 같은 차량 내 이동소형셀형태로 서비스를 받을 수 있다. 본고에서는 그룹이동체 내의 이동소형셀 지원을 위한 이동무선백홀 기술동향을 분석하고 향후 수 Gbps급 이상의 데이터 전송속도를 지원할 수 있는 밀리미터파 기반의 이동무선백홀 기술을 소개한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.54-54
• /
• 2003

DLC films were deposited on Si(100) substrates by inductively coupled plasma (ICP) assisted chemical vapor deposition (CVD). A mixture of acetylene (C$_2$H$_2$) and argon (Ar) gases was used as the precursor and plasma source, respectively. The structure of the films was characterized by the Raman spectroscopy. Results from the Raman spectroscopy analysis indicated that the property change of the DLC films is due to the sp$^3$ and sp$^2$ ratio in the films under various conditions such as ICP power, working pressure and RF substrate bias. The hydrogen content in the DLC films was determined by an electron recoil detector (ERB). The roughness of the films was measured by atomic force microscope (Am). A microhardness tester was used for the hardness and elastic modulus measurement. The DLC film showed a maximum hardness of 37㎬. In this work, the relationship between deposition parameters and mechanical properties were discussed.

• 생명과학회지
• /
• 제16권5호
• /
• pp.794-798
• /
• 2006

토마토 주스를 Sep-pak $C_{18}$ cartridge를 이용하여 ascorbate 및 phenolic 획분으로 분리하여 NDMA 생성 억제 효과를 시험하였다. 시료의 첨가량이 많을수록 NDMA 억제 효과가 비례적으로 증가하여 ascorbate 획분은 최고 $81.37{\pm}0.25%$, phenolic 획분은 $72.03{\pm}0.25%$였다. Phenolic 획분을 prep-HPLC로 4개의 fractions으로 분취하여 NDMA 생성 억제 효과를 실험한 결과 fraction 2에서 활성이 가장 높았으며, fraction 2를 다시 4개의 subfractions으로 재분취하여 활성실험을 한 결과 subfraction 2b의 획분에서 최대 억제율이 pH 1.2에서 $70.62{\pm}0.45%$ 및 pH 4.2에서 $75.30{\pm}0.45%$였다. 그래서 subfraction 2b를 분리, 정제한 후 GC-Mass 및 $^1H-NMR$과 $^{13}C-NMR$로 동정한 결과 phenolic acid의 일종인 o-coumaric acid임을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.125-131
• /
• 1995

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.

• Bulletin of the Korean Chemical Society
• /
• 제9권6호
• /
• pp.345-349
• /
• 1988

The polycrystalline powder of (CaLa) (MgMo)$O_6$ has been prepared at $1350^{\circ}C$ in $H_2/H_2O$ and $N_2$ flowing atmosphere. The powder X-ray diffraction pattern indicates that (CaLa) (MgMo)$O_6$ has a monoclinic perovskite structure with the lattice constants $a_0=b_0=7.901(1){\AA}$, $c =7.875(1){\AA}\;and\;{\gamma}=89^{\circ}$16'(1'), which can be reduced to orthorhombic unit cell, a = 5.551(1) ${\AA}$, b = 5.622(1) ${\AA}$ and c = 7.875(1) ${\AA}$. The infrared spectrum shows two strong absorption bands with their maxima at 590($ν_3$) and 380($ν_4$) cm, which are attributed to $2T_{1u}$ modes indicating the existence of highly charged molybdenum octahedron $MoO_6$ in the crystal lattice. According to the magnetic susceptibility measurement, the compound follows the Curie-Weiss law below room temperature with the effective magnetic moment 1.83(1)$_{{\mu}B}$, which is well consistent with that of spin only value (1.73 $_{\mu}_B$) for $Mo^{5+}$ with $4d^1$-electronic configuration within the limit of experimental error. From the thermogravimetric analysis, it has been confirmed that (CaLa) (MgMo)$O_6$ decomposes gradually into $CaMoO_4,\;MoO_3,\;MgO,\;La_2O_3$ and unidentified phases due to the oxidation of $Mo^{5+}$ to $Mo^{6+}$.

• 한국치위생학회지
• /
• 제14권4호
• /
• pp.601-608
• /
• 2014

Objectives : The purpose of the study is to examine the apoptotic effects of Pseudomonas aeruginosa exotoxin A(PEA) in squamous cell carcinoma(SCC) 25 cells. Methods : Cell growth reduction and apoptosis induced by PEA were confirmed by WST-1 assay, Hoechst 33258 staining, flow cytometry analysis, and Western blot assay. Results : The PEA treatment decreased the cell viability in a dose and time dependent manner: control; $100{\pm}0^e$(p<0.01), 0.1875 nM; $87{\pm}4.36^d$(p<0.01), 0.375 nM; $82{\pm}0.58^d$(p<0.01), 0.75 nM; $72{\pm}1.67^c$(p<0.01), 1.5 nM; $51{\pm}1.53^{bc}$(p<0.01), 7.5 nM; $31{\pm}1.20^{ab}$(p<0.01), 15 nM; $26{\pm}0.67^a$(p<0.01), control; $100{\pm}0^a$(p<0.05), 24 h; $51{\pm}1.53^b$(p<0.05), 48 h; $16{\pm}0.5^c$(p<0.05), 72 h; $12{\pm}1.67^d$%(p<0.05). The PEA was observed on SCC 25 cells with the half maximal inhibitory concentration(IC50) value of 1.5 nM at 24 hours. The PEA treated SCC 25 cells demonstrated several types of apoptotic indications, such as nuclear condensation, the increase of sub G1, and the cleavage of PARP-1 and DFF 45. Conclusions : PEA showed anti-cancer activity against SCC 25 cells via apoptosis. PEA may potentially contribute to human oral cancer treatment.

• 천문학회지
• /
• 제51권6호
• /
• pp.197-206
• /
• 2018

We present the analysis of KMT-2016-BLG-0212, a low flux-variation ($I_{flux-var}{\sim}20mag$) microlensing event, which is in a high-cadence (${\Gamma}=4hr^{-1}$) field of the three-telescope Korea Microlensing Telescope Network (KMTNet) survey. The event shows a short anomaly that is incompletely covered due to the brief visibility intervals that characterize the early microlensing season when the anomaly occurred. We show that the data are consistent with two classes of solutions, characterized respectively by low-mass brown-dwarf (q = 0.037) and sub-Neptune (q < $10^{-4}$) companions. Future high-resolution imaging should easily distinguish between these solutions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권9호
• /
• pp.1237-1246
• /
• 2013

The objective of this study was to estimate variance components and genetic parameters for lactation milk yield (LY), lactation length (LL), average milk yield per day (YD), initial milk yield (IY), peak milk yield (PY), days to peak (DP) and parameters (ln(a) and c) of the modified incomplete gamma function (MIG) in an Ethiopian multibreed dairy cattle population. The dataset was composed of 5,507 lactation records collected from 1,639 cows in three locations (Bako, Debre Zeit and Holetta) in Ethiopia from 1977 to 2010. Parameters for MIG were obtained from regression analysis of monthly test-day milk data on days in milk. The cows were purebred (Bos indicus) Boran (B) and Horro (H) and their crosses with different fractions of Friesian (F), Jersey (J) and Simmental (S). There were 23 breed groups (B, H, and their crossbreds with F, J, and S) in the population. Fixed and mixed models were used to analyse the data. The fixed model considered herd-year-season, parity and breed group as fixed effects, and residual as random. The single and two-traits mixed animal repeatability models, considered the fixed effects of herd-year-season and parity subclasses, breed as a function of cow H, F, J, and S breed fractions and general heterosis as a function of heterozygosity, and the random additive animal, permanent environment, and residual effects. For the analysis of LY, LL was added as a fixed covariate to all models. Variance components and genetic parameters were estimated using average information restricted maximum likelihood procedures. The results indicated that all traits were affected (p<0.001) by the considered fixed effects. High grade $B{\times}F$ cows (3/16B 13/16F) had the highest least squares means (LSM) for LY ($2,490{\pm}178.9kg$), IY ($10.5{\pm}0.8kg$), PY ($12.7{\pm}0.9kg$), YD ($7.6{\pm}0.55kg$) and LL ($361.4{\pm}31.2d$), while B cows had the lowest LSM values for these traits. The LSM of LY, IY, YD, and PY tended to increase from the first to the fifth parity. Single-trait analyses yielded low heritability ($0.03{\pm}0.03$ and $0.08{\pm}0.02$) and repeatability ($0.14{\pm}0.01$ to $0.24{\pm}0.02$) estimates for LL, DP and parameter c. Medium heritability ($0.21{\pm}0.03$ to $0.33{\pm}0.04$) and repeatability ($0.27{\pm}0.02$ to $0.53{\pm}0.01$) estimates were obtained for LY, IY, PY, YD and ln(a). Genetic correlations between LY, IY, PY, YD, ln(a), and LL ranged from 0.59 to 0.99. Spearman's rank correlations between sire estimated breeding values for LY, LL, IY, PY, YD, ln(a) and c were positive (0.67 to 0.99, p<0.001). These results suggested that selection for IY, PY, YD, or LY would genetically improve lactation milk yield in this Ethiopian dairy cattle population.