• 자동차안전학회지
• /
• 제12권1호
• /
• pp.26-32
• /
• 2020

The luxury car market has been steadily growing for the last 10 years and it might keep expanding in the future. Furthermore, it is expected to be a very competitive market because luxury cars are considred to reflect the technology level of motor companies. For this reason, it is very important for motor companies to improve performances of luxury vehicles. However, it takes years for the companies to increase the technology level for the high performances. In this paper, we aim to analyze the technologies for high quality brake perfomances through investigation of two luxury vehicle models and develop a new high performance brake system. First, we found out a variety of effective factors for the high performances. Second, we conducted the brake performance analysis to figure out the relationship between brake effort and brake feeling. Finally, we develped the new brake system using carbon ceramic composite materials to satisfy the high quality brake performances.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.415-418
• /
• 2005

In the semiconductor and optical industry, a new transport system which can replace the conventional transport systems is required. The transport systems are driven by the magnetic field and conveyer belts. The magnetic field may damage semiconductor and the contact force may scratch the optical lens. The ultrasonic wave driven system can solve these problems. In this semiconductor and optical industry, the non-contact system is required fur reducing the damages. The ultrasonic transportation is the solution of the problem. In this paper, the ultrasonic levitation system fur levitating object are proposed. The 3D vibration profiles of the beam are measured by Laser scanning Vibrometer fur verifying the vibration characteristics of the system and the amplitudes of the beam and the levitation heights of object are measured for evaluating the performance.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.24-30
• /
• 2004

Feedwater flowing tube side of number 5 high pressure feedwatrr heaters was heated by extracting steam from high pressure turbine and draining water from moisture separators and number 6 high pressure feedwater heaters and supplied into steam generators. Because the extracting steam from the high pressure turbine is two phase fluid of high temperature, high pressure, and high speed and flows to inverse direction after impinging to impingement baffle. the shell wall of the number 5 high pressure feedwater heater may be affected by flow accelerated corrosion. On May 14, 1999, Point Beach Nuclear Plant (PBNP) with operating at full power experienced a steam leak from rupture of shell side of number 4B feedwater heater. Also, d domestic nuclear power plant experienced a severe wall thinning of shell side of number 5A and 5B feedwater heaters. This paper describes the fluid mixing analysis study using PHOENICS code in order to get at the root of the shell wall thinning of the feedwater heaters. The sections included in the fluid mixing analysis model are around the number 5h feedwater heater shell including the extracting pipeline. To identify the relation between the local velocities and wall thinning. the local velocities according to the analysis results were compared with the distribution of the shell wall thickness by ultrasonic test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.602-603
• /
• 2008

The design modification of problematic component in a given vibration path is disallowed in order to sacrifice other performances such as ride comport or handling of a vehicle. For this, the paper presents a new contribution analysis based on transmissibility ratio (TR) of acceleration in a definite vibration path to find a proper candidate for design modification. The new contribution analysis is based on the fact that the sensitivity of TR over a small design change is inversely proportional to the magnitude of TR. The new methodology can significantly relieve efforts of time-consumming modal analysis for detail modal information. The theory of proposed contribution analysis is simulated with five-degree-of-freedom open vibration path and confirms that the contribution result is well matched with the variance of TR over a dynamic change on a vibration path.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.9-14
• /
• 2012

The formation of the Fe-Al inhibition layer in hot-dip galvanizing is a confusing issue for a long time. This study presents a characterization result on the inhibition layer formed on C-Mn-Cr and C-Mn-Si dual-phase steels after a short time galvanizing. The samples were annealed at $800^{\circ}C$ for 60 s in $N_{2}$-10% $H_{2}$ atmosphere with a dew point of $-30^{\circ}C$, and were then galvanized in a bath containing 0.2 %Al. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) was employed for characterization. The TEM electron diffraction shows that only $Fe_{2}Al_{5}$ intermetallic phase was formed. No orientation relationship between the $Fe_{2}Al_{5}$ phase and the steel substrate could be identified. Two peaks of Al 2p photoelectrons, one from metallic aluminum and the other from $Al^{3+}$ ions, were detected in the inhibition layer, indicating that the layer is in fact a mixture of $Fe_{2}Al_{5}$ and $Al_{2}O_{3}$. TEM/EDS analysis verifies the existence of $Al_{2}O_{3}$ in the boundaries of $Fe_{2}Al_{5}$ grains. The nucleation of $Fe_{2}Al_{5}$ and the reduction of the surface oxide probably proceeded concurrently on galvanizing, and the residual oxides prohibited the heteroepitaxial growth of $Fe_{2}Al_{5}$.

• Restorative Dentistry and Endodontics
• /
• 제34권5호
• /
• pp.406-414
• /
• 2009

본 연구의 목적은 심부 상아질과 치수실 상아질에 $H_2O_2$를 각기 다른 적용시간과 농도로 적용하였을 때, 레진수복물과의 미세인장결합강도에 미치는 영향을 평가하는 것이다. 준비된 각각의 치아에 전형적인 근관와동을 형성하고 다음과 같이 무작위로 1개의 대조군과, 4개의 실험군으로 나누었다: 1군, 전처리를 시행하지 않았다; 2군, 20% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 3군, 10% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 4군 5% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 5군, 2.5% $H_2O_2$를 20분, 10분, 5분간 적용하였다. 위와 같이 처리한 후 와동 내를 Superbond C&B(Sunmedical, Co., Shiga, Japan)로 충전하였다. 각 치아는 $37^{\circ}C$ 증류수에 24시간 저장한 뒤 심부 상아질과 치수실 상아질로 잘라 미세인장결합강도 시험을 시행하였다. 각 군에서 측정된 미세인장결합강도를 3-way ANOVA와 Tukey post hoc test로 통계 처리하였다(p < 0.05). 실험 결과 모든 군에서 심부 상아질(D1)의 미세인장 결합강도가 치수실 상아질(D2)보다 높게 나타났다. 평균 결합강도는 $H_2O_2$의 농도와 적용 시간이 증가할수록 감소하였다. 통계분석에서 상아질의 깊이, $H_2O_2$ 농도와 적용 시간이라는 세 가지 변수간의 교호작용 효과는 없으나(p > 0.05). 상아질의 깊이와 $H_2O_2$ 농도 사이, $H_2O_2$ 농도와 적용 시간 사이에서는 교호작용 효과가 있었다(p < 0.05). SEM 관찰에서는 $H_2O_2$의 농도가 증가할수록 상아세관이 좀 더 개방된 양상을 보였다.

• 동아시아식생활학회지
• /
• 제13권6호
• /
• pp.601-607
• /
• 2003

This study was attempted to investigate the physicochemical changes during soybean-leaf water kimchis fermentation by adding wheat flour in cooking water. Soybean-leaf water kimchis with five different levels of wheat flour in cooking water(0%;A, 5%;B 10%;c, 15%;D, 20%;E) were tested for rhological parameters, fine structural changes, sensory evaluations and chemical analysis. The composition of the soybean-leaf was moisture (80.9%), protein(6.8%), fat(0.6%), ash(2.1%) and alkalinity (+14.9). The amount of reducing sugars of sample A and other samples were 0.75% and 1.08∼1.4% in the initial fermentation stage, but decreased to 0.3 and 0.43∼0.50% in the later fermentation stage, respectively. The pH of sample A decreased from 5.17 to 4.72 during the initial fermentation. On sample B, C, D and E, pH's decreased rapidly during the initial fermentation, but they did not change much in the later fermentation stage. The pectin contents of all samples decreased during 2nd and 4th day of fermentation, then the change was slow. The amount of hemicellulose. cellulose and lignin in terms of the DNF and ADF were varied from 4 to 33%, but the contents of them did not greatly changed during the fermentation. The sensory evaluation showed that both B and C samples had the good score in sweety taste, roasted nutty taste, and the ease of swallowing measured as chewiness. From these results, the optimum soybean-leaf water kimchis can be prepared when 200g soybean-leaf, 1000$m\ell$ water, 15g garlic, 3% red pepper powder and 5 ∼0% wheat flour were fermented at 20$^{\circ}C$ for 2 days.

• 분석과학
• /
• 제36권4호
• /
• pp.180-190
• /
• 2023

The presence of process related impurities in any drug or the drug product was associated with its safety, stability and efficacy. The overall literature survey proved that there is no method published on the assessment of process related impurities in brigatinib. In this study, a simple, reliable and stable HPLC qualitative method was reported for quantification of process related impurities with easy and quick extraction procedure. The impurities along with standard brigatinib was resolved on Lichrospher^® C18 (250 mm × 4.6 mm; 5 ㎛ particle size) column in room temperature using methanol, acetonitrile, pH 4.5 phosphate buffer in 55:25:20 (v/v) at 1.0 mL/min as mobile phase and UV detection at 261 nm. The method produces well resolved peaks at retention time of 4.60 min, 12.28 min, 3.37 min, 7.34 min and 8.39 min respectively for brigatinib, impurity A, B, C and D. The method produces a very sensitive detection limit of 0.0065 ㎍/mL, 0.0068 ㎍/mL, 0.0053 ㎍/mL and 0.0058 ㎍/mL for impurity A, B, C and D respectively with calibration curve linear in the concentration range of 22.5-135 ㎍/mL for brigatinib and 0.0225-0.135 ㎍/mL for impurities. The method produces all the validation parameters under the acceptable level and doesn't produces any considerable changes in peak area response while minor changes in the developed method conditions. The method can effectively resolve the unknown stress degradation products along with known impurities with less % degradation. The method can efficiently resolve and quantify the impurities in formulation and hence can suitable for the routine quality analysis of brigatinib in raw material and formulation.

• 소성∙가공
• /
• 제22권4호
• /
• pp.183-188
• /
• 2013

Scroll compressors are widely used in air conditioning systems and in automobiles due to their low pressure loss, minimal vibrations, and light-weight. Open-die forging with back pressure is used to forge the rotating scroll, and it requires special care since the forging die can be severely damaged at the fixed end of the spiral cavity similar to a fracture of a cantilever beam. To overcome the inevitable weakness of the forging die due to such damage, an innovative design is necessary. In this study, structural analysis using the finite element method was conducted to determine the reason for the fracture of the forging die. A novel design to avoid stress concentrations and vertical deflection, causing serious damage to the die, is suggested.

• 통합자연과학논문집
• /
• 제10권2호
• /
• pp.85-94
• /
• 2017

Fibroblast growth factor receptor (FGFR) belongs to the family of receptor tyrosine kinase. They play important roles in cell proliferation, differentiation, development, migration, survival, wound healing, haematopoiesis and tumorigenesis. FGFRs are reported to cause several types of cancers in humans which make it an important drug target. In the current study, HQSAR analysis was performed on a series of recently reported 1H-Pyrazolo [3,4-b]pyridine derivatives as FGFR antagonists. The model was developed with Atom (A) and bond (B) connection (C), chirality (Ch), hydrogen (H) and donor/acceptor (DA) parameters and with different set of atom counts to improve the model. A reasonable HQSAR model ($q^2=0.701$, SDEP=0.654, NOC=5, $r^2=0.926$, SEE=0.325, BHL=71) was generated which showed good predictive ability. The contribution map depicted the atom contribution in inhibitory effect. A contribution map for the most active compound (compound 24) indicated that hydrogen and nitrogen atoms in the side chains of ring B as well as hydrogen atoms in the side chain of ring C and the nitrogen atom in the ring D contributed positively to the activity in inhibitory effect whereas, the lowest active compound (compound 04) showed negative contribution to inhibitory effect. Thus results of our study can provide insights in the designing potent and selective FGFR kinase inhibitors.