• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.4
• /
• pp.255-265
• /
• 1997

Precipitation and strengthening mechanisms in squeeze cast Mg-8.5wt%Li-4.5wt%Al have been investigated by differential scanning calorimetry(DSC), scanning electron microscopy(SEM), in-situ and ex-situ X-ray diffraction analysis and hardness measurement. Special emphasis was placed on the investigation of the precipitation behavior by the DSC technique. Microstructural and calorimetric analysis showed that ${\theta}$ and ${\delta}$ precipitates in the b.c.c. ${\beta}$ phase matrix, forming two exothermic peaks at the temperature ranges of $130^{\circ}C{\sim}180^{\circ}C$ and $236^{\circ}C{\sim}280^{\circ}C$. ${\theta}$ and ${\delta}$ dissolve into the matrix forming an endothermic peak at the temperature range of $280^{\circ}C{\sim}352^{\circ}C$. The as-cast microstructure consists of ${\alpha}$, ${\beta}$ and ${\delta}$. Peak strength was obtained after aging for 1 hour at $50^{\circ}C$. The aging time required for the peak strength decreased as the aging temperature increases. The hardness decrease during overaging was due to the coarsening of ${\theta}$ precipitates. Microhardness measurement showed that variation of the hardness of ${\beta}$ matrix was more pronounced than that of the ${\alpha}$ phase, indicating that the ${\beta}$ phase is more responsible for the strengthening of the Mg-8.5wt%Li-4.5wt%Al alloy.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1392-1400
• /
• 1995

WC-10wt%Co-Al2O3 ceramic composites, using both the SHS (Self-propagating High Temperature Synthesis) synthesized WC powder method and commercial WC powder, were prepared by varing WC-Co/Al2O3 vol% ratio and sintering temperature (1350℃∼1650℃) for 1 hr in Ar atmosphere. Mechanical characterization has been investigated by Instron meterial testing system and Vicker's hardness test. Compositional and structural chracterizations were carried out by energy-dispersive analysis of X-ray (EDAX) data and scanning electron microscope (SEM). Electrical characterization was carried out by the electrical resistivity measurement using 4-point probe method. As sintering period increased and Al2O3 contents decreased in WC-10wt%Co-Al2O3 ceramic composite, shrinkage and relative density increased, resulting in maximum values at 1600℃. Also the major matrix phase changed with increasing Al2O3 content from 0 to 100 vol%. It was also identified by SEM, EDAX, and electrical resistivity measurement. Based on the results of analysis of flexural strength, toughness and hardness, the mechanical properties of WC-10wt%Co-Al2O3 ceramic composites using the SHS synthesized WC powder were better than those WC-10wt%Co-Al2O3 ceramic composites using commercial WC powder because WC-10wt%Co-Al2O3 ceramic composites using the SHS synthesized WC powder were sintered very well due to small initial particle size. By the addition of 40 vol% Al2O3 [60(WC=10wt%Co)-40Al2O3], it was possible to obtain a proper candidate as a superalloy.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.465-469
• /
• 2003

Microlens arrays were fabricated using a novel fabrication technology based on the exposure of a PMMA (Polymethylmethacrylate) sheet to deep X-rays and subsequent thermal treatment. X-ray irradiation causes the decrease of molecular weight of PMMA, which in turn decreases the glass transition temperature and consequently causes a net volume increase during the thermal cycle resulting in a swollen microlens. A new physical modeling and analyses for microlens formation were presented according to experimental procedure. A simple analysis based on the new model is found to be capable of predicting the shapes of microlens which depend on the thermal treatment. For the replication of microlens arrays having various diameters with different foci on the same surface, the hot embossing and the microinjection molding processes has been successfully utilized with a mold insert that is fabricated by Ni-electroplating based on a PMMA microstructure of microlenses. Fabricated microlenses showed good surface roughness with the order of 1 nm.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.192-196
• /
• 1990

Eleven herbicides were treated in soybean fields of Dukso and Yeoncheon in Gyeonggi province. These herbicides were classified by two-dimensional ordination analysis based on important values of the weed flora which were obtained after application of herbicides. Weed community types were E. crus-galli(56%)-D. adscendens (14%) -C. album (10%)-P. oleracea (8%) and P. oleracea (58%)-E. crus-galli (29%) -A. mangostanus (5%) -D. adscendens (3%), respectively. From soybean field at Dukso, 11 weed community types or 11 herbicide groups were obtained. And at Yeoncheon, 9 weed community types or 9 herbicide groups were classified. At treated blocks with clomazone and bentazon, C. amuricus and E. crus-galli dominated respectively. And at treated blocks with quizalofop, haloxifop and alloxydium, P. oleracea dominated remarkably. The herbicides classification by the two-dimensional ordination analysis could be used more effectively to selecting herbicides for reciprocal and systematic weed control than by similarity analysis.

• Clinical and Experimental Reproductive Medicine
• /
• v.12 no.2
• /
• pp.25-37
• /
• 1985

Four points on the basal body temperature (B.B.T.) curve was correlated with the estimated time of ovulation, as determined by serial ultrasound in 50 induced menstrual cycles from 22 subjects. The time of ovulation was estimated by measuring the maximal diameter of follicles and observing the morphologic changes within the ovary from follicle to corpus luteum. The results were as following; 1. The diameter of the follicle measured at the day before disappearance was 21.1 mm on an average (S.D.: 2.14). The average follicular growth for 4 days before ovulation was measured at a rate of 2.8 mm/day, and rapid growth of follicle was observed 3.1 mm/day at the day before. 2. The changes associated with rupture of the follicles were the followings, in order of frequency; decrease in size(94%), disappearance of follicles(64%), fluid in the Cul-de-Sac(26%) and increased internal echoes(16%). 3. Only 20 of 50 cycles, exhibited a BBT dip and correlated with the estimated time of ovulation by ultrasound in 2 of which cases(10%). BBT nadir, 30 of 50 cycles, correlated in 5(16.7%). The first day of hyperthermic plateau(FDHP) and BBT coverline was exhibited in all cycles, correlated in 41(82%) and 35(70%) cases. 4. The relationship between the diameter of dominant dominant follicle, measured by ultrasound, and the basal body temperature curve were as following. During cycles in which dip was observed on the BBT curve, the follicular diameter were 10.5${\pm}$2.12 mm on 4 days prior to the point (D-4), and 12.5${\pm}$2.12 mm (D-3), 15.5${\pm$2.12 mm (D-2), 17.0${\pm}$1.41 mm (D-1) and 21.5${\pm}$2.12 mm just prior to the dip (D-0). In the nadir; 9.6${\pm}$1.67 mm (N-4), 12.8${\pm}$1.79 mm (N-3), 16.2${\pm}$1.92 mm (N-2), 18.2${\pm}$2.17 mm (N-1) and 21.4${\pm}$2.61 mm (N-0). In the First day of Hyperthemic Plateau (FDHP); 9.8${\pm}$1.36 mm (F-4), 12.4${\pm}$1.41 mm (F-3),15.1${\pm}$1.57 mm (F-2), 18.1${\pm}$1.67 mm (F-1) and 21.2${\pm}$2.25 mm (F-0). In the BBT coverline endopint; 9.9${\pm}$.39 mm (C-4), 12.5 ${\pm}$1.44 mm (C-3), 15.2${\pm}$1.64 mm (C-2), 18.0 ${\pm}$1.69 mm (C-1), and 21.2${\pm}$2.31 mm (C-0). 5. The relationship between the ultrasonographic signs of ovulation and the basal body temperature curve were as following. The BBT dip correlated with the ovulation in 2 cases, which revealed decrease in follicular diameter (100%), fluid pattem in the Cul-de-Sac (1 case, 50%) and complete disappearance of follicle (1 case, 50%). In the nadir (5 cases); the ultrasonographic signs of ovulation were decrease in follicular diameter (5 cases, 100%), fluid pattern in the Cul-de-Sac (1 case, 20%) and complete disappearance of follicle (3 cases, 60%). In the First day of Hyperthermic Plateau (41 cases); decrease in follicular diameter (40 cases, 97.6%), fluid pattern in the Cul-de-Sac (11 cases, 26.8%), appearance of internal echo and thickening of the wall (6 cases, 14.6%) and com plete disappearance of follicle (28 cases, 68.3%). In the BBT coverline endpoint (35 cases); decrease in follicular diameter (33 cases, 94.3%), fluid pattern in the Cul-de Sac (9 cases, 25.7%), appearance of internal echo and thickening of the wall (5 cases 14.3%) and complete disappearance of follicle (20 cases, 57.1%).

• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2008

Three dietary herbs, Coptis japonica Makino (48.5%), Lonicera japonica Thunb (48.5%), and Morus alba L. (3%) were mixed and used as additives in hen's feed. One hundred-eight, 28-wk-old Lohmann Brown hens were assigned randomly with three diet treatments (0, 0.3, and 1% of herb mix). Hens were fed for 6 wks to investigate the effect of herb mix on the physicochemical quality of eggs during storage at $4^{\circ}C$ for 0, 3, 7, and 14 days. Proximate composition including the content of water, protein, fat, and ash had no difference among 3 diet treatments. Objective color of cooked whole egg from hens fed herb mix did not show any effect compared with control except for the color $a^*$- and $b^*$-values at day 3. However, color $a^*$- and $b^*$-values increased during storage regardless of treatment. From the texture analysis, eggs from hens fed with the herb mix were not different compared with control remove for springness at day 14. However, it was observed that springness and gumminess were decreased as storage period increased. Therefore, a dietary supplementation of herb mix to hen may not affect on proximate composition, color and texture of eggs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1555-1561
• /
• 2016

Shank skin color of Korean native chicken (KNC) shows large color variations. It varies from white, yellow, green, bluish or grey to black, whilst in the majority of European breeds the shanks are typically yellow-colored. Three shank skin color-related traits (i.e., lightness [$L^*$], redness [$a^*$], and yellowness [$b^*$]) were measured by a spectrophotometer in 585 progeny from 68 nuclear families in the KNC resource population. We performed genome scan linkage analysis to identify loci that affect quantitatively measured shank skin color traits in KNC. All these birds were genotyped with 167 DNA markers located throughout the 26 autosomes. The SOLAR program was used to conduct multipoint variance-component quantitative trait locus (QTL) analyses. We detected a major QTL that affects $b^*$ value (logarithm of odds [LOD] = 47.5, $p=1.60{\times}10^{-49}$) on GGA24 (GGA for Gallus gallus). At the same location, we also detected a QTL that influences $a^*$ value (LOD = 14.2, $p=6.14{\times}10^{-16}$). Additionally, beta-carotene dioxygenase 2 (BCDO2), the obvious positional candidate gene under the linkage peaks on GGA24, was investigated by the two association tests: i.e., measured genotype association (MGA) and quantitative transmission disequilibrium test (QTDT). Significant associations were detected between BCDO2 g.9367 A>C and $a^*$ ($P_{MGA}=1.69{\times}10^{-28}$; $P_{QTDT}=2.40{\times}10^{-25}$). The strongest associations were between BCDO2 g.9367 A>C and $b^*$ ($P_{MGA}=3.56{\times}10^{-66}$; $P_{QTDT}=1.68{\times}10^{-65}$). However, linkage analyses conditional on the single nucleotide polymorphism indicated that other functional variants should exist. Taken together, we demonstrate for the first time the linkage and association between the BCDO2 locus on GGA24 and quantitatively measured shank skin color traits in KNC.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.539-548
• /
• 2007

The study was carried out to examine combined effects of packaging and electron-beam irradiation on lipid oxidation and meat color of fermented sausages during storage. Fermented and aged sausages were exposed to electron-beam at 2 kGy. The samples were vacuum or aerobic-packaged with the non-irradiated samples at 4±1℃. Regardless of irradiation, the pH values of vacuum-packaged samples was lower than those of aerobic-packaged ones at 14 day (p<0.05). Total microbes and lactic acid bacteria counts significantly decreased during the storage period (p<0.05). And counts of non-irradiated samples were significantly higher than those of irradiated (2 kGy) samples with aerobic packaging. The TBARS values of 2 kGy-irradiated samples were significantly higher than those of non-irradiated samples. The TBARS values of vacuum packaged samples had lower than those of aerobic-packaged ones (p<0.05). Colors (parameters L*, a* and b* values) tended to decrease as the storage period increased. Redness(a*) and yellowness (b*) of 2 kGy irradiated samples were higher than those of non-irradiated ones (p<0.05). In sensory analysis, irradiated (2 kGy) samples with aerobic packaging had higher off-flavor than non-irradiated ones (p<0.05). Therefore, results indicated that irradiation coupled with vacuum packaging may minimize TBARS values of irradiated sausages during storage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.942-948
• /
• 2005

New polymorphism of major histocompatibility complex B-G genes was investigated by amplification and digestion of a 401bp fragment including intron 1 and exon 2 using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) technique with two restriction enzymes of Msp I and Tas I in eight breeds of Chinese indigenous chickens and one exotic breed. In the fragment region of the gene, three novel single nucleotide polymorphisms (SNPs) were detected at the two restriction sites. We found the transition of two nucleotides of A294G and T295C occurred at Tas I restriction site, and consequently led to a non-synonymous substitution of asparagine into serine at position 54 within the deduced amino acid sequence of immunoglobulin variable-region-like domain encoded by the exon 2 of B-G gene. It was observed at rare frequency that a single mutation of A294G occurring at the site, also caused an identical substitution of amino acid, asparagine 54-to-serine, to that we described previously. And the transversion of G319C at Msp I site led to a non-synonymous substitution, glutamine 62-to-histidine. The new alleles and allele frequencies identified by the PCR-RFLP method with the two enzymes were characterized, of which the allele A and B frequencies at Msp I and Tas I loci were given disequilibrium distribution either in the eight Chinese local breeds or in the exotic breed. By comparison, allele A at Msp I locus tended to be dominant, while, the allele B at Tas I locus tended to be dominant in all of the breeds analyzed. In Tibetan chickens, the preliminary association analysis revealed that no significant difference was observed between the different genotypes identified at the Msp I and Tas I loci and the laying performance traits, respectively.