• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.53-68
• /
• 1999

To improve the slow convergence property of the steepest ascent type algorithm for continuous D-optimal design problems. we develop a new algorithm. We apply the nonlinear system of equations as the necessary condition of optimality and develop the two-point algorithm that solves the problem of clustering. Because of the nature of the steepest coordinate ascent algorithm avoiding the problem of clustering itself helps the improvement of convergence speed. The numerical examples show the performances of the new method is better than those of various steepest ascent algorithms.

• Communications for Statistical Applications and Methods
• /
• 제9권1호
• /
• pp.33-38
• /
• 2002

We prove that blocked complete dialler crosses using balance incomplete block design are A-, D-, E-optimal design. Also, we provide such blocked complete dialled crosses and their average efficiency with table.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권2호
• /
• pp.71-76
• /
• 2004

This paper describes the antenna analysis of the multi-beam for communicationsatellite. The design core parameters of the antenna system are optimal antennadiameter, feed horn type and hom size, F/D, and the coordinate of offset horns. Thepaper deals with the method to determine design core parameters of optimal antennadiameter, feed horn type and horn size. F/D, and the coordinate of offset horns, andthe performances of design result.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.316-320
• /
• 2004

This paper describes Ka-band antenna performance analysis of COMS satellite. The key parameters of the antenna system are optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns. The paper deals with the method to determine design core parameters of optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns, and the performances of design result.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권5호
• /
• pp.323-330
• /
• 2004

In this paper, we propose a design method of PID controller using an improved Tabu Search. Tabu Search is improved by neighbor solution creation using Gaussian random distribution and generalized Hermite Biehler Theorem for stable bounds. The range of admissible proportional gains are determined first in closed form. Next the optimal PID gains are selected by improved Tabu Search. The results of Computer simulations represent that the proposed Tabu Search algorithm shows a fast convergence speed and a good control performance.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.25-33
• /
• 1998

An experimental study has been carried out to obtain optimal conditions for turbulent mixing of two fluid streams at various angle branches by a flow visualization method. The main purpose of this study is the utilization of flow visualization method as a fast and efficient way to find the optimal mixing conditions when several flow control parameters are superimposed. It is verified that the optimal conditions estimated by flow visualization method have good agreement with the concentration field measurements. The results demonstrate that the diameter ratio is mainly attributed to the mixing phenomena than the branch pipe angle and the Reynolds number. The most striking fact is that there exists the best diameter ratio, d/D.ident. O.17, which requires the minimum momentum ratio in the range of the present experiment. The velocity ratio for the optimal mixing condition has a value within 2 to 16 according to the different flow parameters.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.57-58
• /
• 2010

This paper proposes maximum torque control of IPMSM drive using optimal current. This control method is applicable over the entire speed range which considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current $i_d$ for maximum torque operation is derived. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using multi-MFC and ANN controller. Also, this paper proposes maximum control of IPMSM drive using approximation method. This method is decreased the burden of digital signal process(DSP) in calculation of optimal current. This paper proposes the analysis results to verify the effectiveness of the MFC and ANN controller. Also it verifies the validity of maximum torque control of IPMSM drive with optimal current.

• ETRI Journal
• /
• 제33권5호
• /
• pp.689-694
• /
• 2011

In this paper, we study scheduling schemes for two-user two-way wireless relaying systems. Two transmission modes are considered: point-to-point direct transmission and two-way amplify-and-forward relaying. An optimal scheduling scheme that opportunistically selects the best transmission mode for each user is proposed to minimize the sum bit error rate (BER). The performance lower bound of the optimal scheduling scheme is analyzed, and closed-form expression of the lower-bound BER is derived. However, for optimal scheduling, the scheduler requires the knowledge of channel state information (CSI) of all links. To reduce the feedback information of CSI, we also propose a suboptimal scheduling scheme that selects the transmission mode using only the CSI of two direct links. Simulation results show that there are 4 dB to 8 dB gains for the proposed optimal and suboptimal schemes over the fixed direct transmission and fixed two-way relayed transmission scheme. The performance gap between the optimal and suboptimal scheduling schemes is small, which implies a good trade-off between implementation complexity and system performance.

• 한국미생물·생명공학회지
• /
• 제15권5호
• /
• pp.340-345
• /
• 1987

D-xylose로 부터 에탄올을 직접생산하기 인하여 D-xylose를 유일한 탄소원과 에너지원으로 이용하는 균주들을 토양에서 분리하였다. 이들 중에서 에탄올 생산성이 가장 높은 균주를 선별하여 Fusarium sp.로 부분동정하였다. 이 균주에 의한 에탄을 생간의 최적 조건을 검토한 결과, 에탄올의 최대생산은 초기 pH8.0, 온도 33$^{\circ}C$, 기질농도 2%일 때 이루어졌다. 상기 조건하에서 최대 에탄을 생산량은 7.0g/ g 이었으며, 에탄올 수율과 균체 수율은 각각 0.35g/g(이론적 전환율 ; 68.6%)와 0.27g/g이었다.

• 미생물학회지
• /
• 제28권4호
• /
• pp.345-350
• /
• 1990

D-xylose로부터 직접 ethanol을 생산할 목적으로 D-xylose를 유일한 탄소원과 에너지원으로 이용하는 효모들을 토양, 톱밥, 썩은 나무들로부터 분리하였다. 이 균주들 가운데서 ethanol 생산력이 가장 우수한 균주는 썩은 나무로부터 분리한 Candida sp. L-16으로 동정되었다. 이균주를 이용한 ethanol 발효의 최적 조건은 진탕속도 60rpm, 배양온도 28C, 초기 pH 4.5 및 D-xylose 농도 5%이었다. 알코올 생산은 배양 4일째에 최대치에 도달했고 이때의 ethanol 농도는 2.4%(v/v)로서 이론적인 ethanol 수율은 총당에 대해 74.4%이었다.