• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.255-256
• /
• 2002

In this paper, the frictional behavior according to the contact geometry was investigated using a micro-tribotester built inside a Scanning Electron Microscope (SEM) and an Atomic Force Microscope (AFM). FFT (Fast Fourier Transform) analysis for friction was conducted as a method to interpret the contact condition. From the experimental results, it could be concluded that the relative dimensions and distribution of contact asperities on the surface could be predicted by the power spectrum and main frequency in the FFT analysis of the friction signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.851-856
• /
• 1987

A direct computation algorithm of two dimensional fast Fourier transform (2D-FFT) is considered here for implementation in mesh connected multiprocessor array of both a 2D-toroidal and a rectangular type. Results are derived for a hardware algorithm including data allocation and interprocessor communications. A performance comparison is carried out between the proposed direct 2D-FFT computation and the conventional one to show that a new algorithm gives higher speedup under a reasonable assumption on the speeds of operations.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.409-414
• /
• 2005

In the literatures, the FFT-based SAM has been well applied to the computation of the steady-state responses of discrete dynamic systems. In this paper, a fast fourier transforms (FFT)-based spectral analysis method (SAM) is proposed fur the dynamic analysis of spectral element models subjected to the non-zero initial conditions. However, the FFT-based SAM has not yet been developed for the continuous systems represented by the spectral element model.

• 한국통신학회논문지
• /
• 제27권8B호
• /
• pp.787-795
• /
• 2002

본 논문에서 OFDM (Orthogonal Frequency-Division Multiplexing) 시스템용 2K/4K/8K-point 복소 FFT (Fast Fourier Transform) 프로세서의 구조와 그 구현방법을 제안한다. 제안하는 프로세서의 구조는 긴 길이의 DFT를 짧은 길이의 다차원 DFT로 분할하기 위하여 쿨리-투키 알고리듬에 기반 한다. 전치 메모리, 셔플 메모리, 메모리 합성 방법은 다차원 변환을 위한 메모리의 능률적 조작을 위해 사용한다. Booth 알고리듬과 CORDIC (COordinate Rotation DIgital Computer) 프로세서는 각 차원에서 트위들 팩터 곱셈을 위해 사용한다. 또한, CORDIC 프로세서에는 트위들 팩터를 저장하기 위해 필요한 ROM의 사용을 막기 위해 트위들 팩터 발생 방법을 제안한다. 전체 2K/4K/8K FFT 프로세서는 600,000 게이트를 사용하며, 1.8V, 0.18${\mu}m$ CMOS를 이용해 구현한다. 제안하는 프로세서는 8K-point FFT를 273${\mu}s$마다, 2K-point를 68.26${\mu}s$마다 수행할 수 있으며, SNR은 DVB-T의 OFDM을 위해 충분한 48dB를 넘는다.

• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.41-49
• /
• 2020

The purpose of this study was to investigate the use of the Deep Neural Networks(DNN) model to classify user's emotions, in particular Electroencephalography(EEG) toward Virtual-Reality(VR) based 3D design alternatives. Four different types of VR Space were constructed to measure a user's emotion and EEG was measured for each stimulus. In addition to the quantitative evaluation based on EEG data, a questionnaire was conducted to qualitatively check whether there is a difference between VR stimuli. As a result, there is a significant difference between plan types according to the normalized ranking method. Therefore, the value of the subjective questionnaire was used as labeling data and collected EEG data was used for a feature value in the DNN model. Google TensorFlow was used to build and train the model. The accuracy of the developed model was 98.9%, which is higher than in previous studies. This indicates that there is a possibility of VR and Fast Fourier Transform(FFT) processing would affect the accuracy of the model, which means that it is possible to classify a user's emotions toward VR based 3D design alternatives by measuring the EEG with this model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.27-33
• /
• 2003

In closed-die forging process, blocker has been used to fill and distribute metal well in finisher die. Generally, the blocker shape was determined by an expert with many experiences. However, the manual blocker design process takes much time and efforts, so various automatic methods for the blocker design process have been suggested for the last three decades. The method with filtering in FFT (Fast Fourier Transform) for the blocker design provides general solution than other methods. But, due to the properties of FFT in time-frequency domain, this method has some drawbacks such as long calculation time, difficulty of local control and additional boundary process after filtering. In this study, DWT (Discrete Wavelet Transform), which is more flexible and is more wildly used than FFT, is applied to the blocker design. The method with filtering in DWT is very proper to design blocker in both 2-D and 3-D shapes. To verify the efficiency of this method, blockers of some models are designed and the results show that blocker design with DWT is effective fer the blocker designs

• 소성∙가공
• /
• 제12권4호
• /
• pp.277-283
• /
• 2003

In a closed-die forging process, blocker has been used to fill and distribute metal well in finisher die. Generally, the blocker shape was determined by an expert with many experiences. However, the manual blocker design process takes much time and efforts, so various automatic methods for the blocker design process have been suggested for the last three decades. The method with filtering in FFT (Fast Fourier Transform) for the blocker design provides general solution than other methods. But. due to the properties of FFT in time-frequency domain, this method has some drawbacks such as long calculation time, difficulty of local control and additional boundary process after filtering. In this study. DWT (Discrete Wavelet Transform), which is more flexible and is more wildly used than FFT, is applied to the blocker design. The method with filtering in DWT is very proper to design blocker in both 2-D and 3-D shapes. To verify the efficiency of this method, blockers of some models are designed and the results show that blocker design with DWT is effective for the blocker designs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.882-885
• /
• 2002

Assessing the condition of air insulation by measuring electromagnetic wave generated in it by partial discharges gives warning of developing faults and breakdown which may give some bad effects to other thing concerned with it. Electromagnetic wave are taken from UHF antenna with 20k ~ 2GHz frequency range. The signal waveform and FFT(Fast Fourier Transform) results from UHF antenna for PD(partial discharge) generated from two different electrode(needle-plane, needle-needle) configurations are shown and it is processed by using PRPD($\Phi-q-n$ distribution) method. Cumulative pulse sequence during 100 period is compared with PRPD method. This also will show the possibility of making apparent distinction between two PD sources.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.162-167
• /
• 2012

This paper proposes a speech processing system based on a model of the human auditory system and a noise reduction neural network with fast Fourier transform (FFT) amplitude and phase spectrums for noise reduction under background noise environments. The proposed system reduces noise signals by using the proposed neural network based on FFT amplitude spectrums and phase spectrums, then implements auditory processing frame by frame after detecting voiced and transitional sections for each frame. The results of the proposed system are compared with the results of a conventional spectral subtraction method and minimum mean-square error log-spectral amplitude estimator at different noise levels. The effectiveness of the proposed system is experimentally confirmed based on measuring the signal-to-noise ratio (SNR). In this experiment, the maximal improvement in the output SNR values with the proposed method is approximately 11.5 dB better for car noise, and 11.0 dB better for street noise, when compared with a conventional spectral subtraction method.