• ETRI Journal
• /
• v.45 no.6
• /
• pp.1035-1045
• /
• 2023

We propose a novel graphics processing unit (GPU) algorithm that can handle a large-scale 3D fast Fourier transform (i.e., 3D-FFT) problem whose data size is larger than the GPU's memory. A 1D FFT-based 3D-FFT computational approach is used to solve the limited device memory issue. Moreover, to reduce the communication overhead between the CPU and GPU, we propose a 3D data-transposition method that converts the target 1D vector into a contiguous memory layout and improves data transfer efficiency. The transposed data are communicated between the host and device memories efficiently through the pinned buffer and multiple streams. We apply our method to various large-scale benchmarks and compare its performance with the state-of-the-art multicore CPU FFT library (i.e., fastest Fourier transform in the West [FFTW]) and a prior GPU-based 3D-FFT algorithm. Our method achieves a higher performance (up to 2.89 times) than FFTW; it yields more performance gaps as the data size increases. The performance of the prior GPU algorithm decreases considerably in massive-scale problems, whereas our method's performance is stable.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.473-476
• /
• 2003

We suggest 2 dimensional Fast Fourier Transform using Polynomial Transform and integer Fast Fourier Transform. Unlike conventional 2D-FFT using the direct quantization of twiddle factor, the suggested 2D-FFT adopts implemented by the lifting so that the suggested 2D-FFT is power adaptable and reversible. Since the suggested FFT performg integer-to-integer mapping, the transform can be implemented by only bit shifts and auditions without multiplications. In addition. polynomial transform severely reduces the multiplications of 2D-FFT. While preserving the reversibility, complexity of this algorithm is shown to be much lower than that of any other algorithms in terms of the numbers of additions and shifts.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.697-702
• /
• 2021

Fast Fourier Transform (FFT) is a major signal processing block being widely used. For long-point FFT processing, usually more than 1024 points, its low-complexity implementation becomes very important while retaining high SQNR (Signal-to-Quantization Noise Ratio). In this paper, we present a low-complexity FFT algorithm with a simple dynamic scaling scheme. For the 2048-point pipelined FFT processing, we can reduce the number of general multipliers by half compared to the well-known radix-2 algorithm. Also, the table size for twiddle factors is reduced to 35% and 53% compared to the radix-2 and radix-2² algorithms respectively, while achieving SQNR of more than 55dB without increasing the internal wordlength progressively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3438-3454
• /
• 2018

In this paper, we propose a robust blind watermarking scheme for high-definition video. In the embedding process, luminance component of each frame is transformed by 2-dimensional fast Fourier transform (2D FFT). A secret key is used to generate a matrix of random numbers for the security of watermark information. The matrix is transformed by inverse steerable pyramid transform (SPT). We embed the watermark into the low and mid-frequency of 2D FFT coefficients with the transformed matrix. In the extraction process, the 2D FFT coefficients of each frame and the transformed matrix are transformed by SPT respectively, to produce two oriented sub-bands. We extract the watermark from each frame by cross-correlating two oriented sub-bands. If a video is degraded by some attacks, the watermarks of frames contain some errors. Thus, we use an ensemble position-based error correcting algorithm to estimate the errors and correct them. The experimental results show that the proposed watermarking algorithm is imperceptible and moreover is robust against various attacks. After embedding 64 bits of watermark into each frame, the average peak signal-to-noise ratio between original frames and embedded frames is 45.7 dB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.498-503
• /
• 2009

As for Hadamard Transform, because the calculation time of this transform is slower than Discrete Cosine Transform (DCT) and Fast Fourier Transform (FFT), the effectiveness and the practicality are insufficient. Then, the computational complexity can be decreased by using the butterfly operation as well as FFT. We composed calculation time of FFT with that of Fast Complex Hadamard Transform by constructing the algorithm of Fast Complex Hadamard Transform. They are indirect conversions using program of complex number calculation, and immediate calculations. We compared calculation time of them with that of FFT. As a result, the reducing the calculation time of the Complex Hadamard Transform is achieved. As for the computational complexity and calculation time, the result that quadrinomial Fast Complex Hadamard Transform that don't use program of complex number calculation decrease more than FFT was obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1253-1260
• /
• 2001

Transient thermal analysis of a three-dimensional axisymmetric automotive disk brake is presented in this paper. Temperature fields are obtained using a hybrid FFT-FEM scheme that combines Fourier transform techniques and finite element method. The use of a fast Fourier transform algorithm can avoid singularity problems and lead to inexpensive computing time. The transformed problem is solved with finite element scheme for each frequency domain. Inverse transforms are then performed for time domain solution. Numerical examples are presented for validation tests. Comparisons with analytical results show very good agreement. Also, a 3-D simulation, based upon an automotive brake disk model is performed.

• The KIPS Transactions:PartD
• /
• v.14D no.2
• /
• pp.169-180
• /
• 2007

This paper discusses a new unsupervised XML document clustering technique based on the function transform and FFT(Fast Fourier Transform). An XML document is transformed into a discrete function based on the hierarchical nesting structure of the elements. The discrete function is, then, transformed into vectors using FFT. The vectors of two documents are compared using a weighted Euclidean distance metric. If the comparison is lower than the pre specified threshold, the two documents are considered similar in the structure and are grouped into the same cluster. XML clustering can be useful for the storage and searching of XML documents. The experiments were conducted with 800 synthetic documents and also with 520 real documents. The experiments showed that the function transform and FFT are effective for the incremental and unsupervised clustering of XML documents similar in structure.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.491-496
• /
• 2018

The purpose of this study is to analyze the noise spectra in DWI (diffusion-weighted imaging) pulse sequences of 1.5 Tesla and 3.0 Tesla MRI, The ACR (American College of Radiology) phantom and noise spectrum were analyzed by FFT (fast Fourier transform) and TFFT (temporal frequency analysis) using WavePad sound editor version 8.13 (NCH software, Greenwood Village, CO, USA). Noise spectra, FFT and TFFT were analyzed for laboratory 1.5Tesla and 3.0Tesla DWI MR pulse sequences. The noise threshold of the frequency amplitude in the FFT and TFFT at 3.0Tesla compared to 1.5Tesla was between 1.5Tesla and -6 dB, and between 3.0Tesla and 0 dB, the DWI pulse sequence for the patient's noise reduction was appropriately MR examination needs to be applied.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2019

An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.206-212
• /
• 2008

This paper proposes the PLL(Phase-Locked Loop) algorithm by a new FFT(Fast Fourier Transform) in a grid-connected PV PCS(Photovoltaics Power Conditionning System). The grid-connected inverter that is applied in a new renewable energy field needs the grid phase information for synchronism. Unlike the PLL which is normally used by three phase D-Q conversion, the preposed PLL algorithm using FFT has non-gain tuning and the powerful noise elimination by the characteristics of FFT. Both simulation and experimental result show that proposed algorithm has the good capacity.