• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1546-1549
• /
• 2005

Al-doped ZnO (ZnO:Al) thin films were grown on corning 1737 glass substrates by dc magnetron sputtering. The structural, electrical and optical properties of the films were investigated as a function of various discharge power. The obtained films were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The lowest resistivity is $6.0{\times}10^{-4}$ Ocm with the carrier concentration of $2.694{\times}10^{20}$ $cm^{-3}$ and Hall mobility of $20.426cm^2/Vs$. The average transmittance in the visible range was above 90%.

• Carbon letters
• /
• v.1 no.3_4
• /
• pp.138-142
• /
• 2001

The effect of electrochemical surface treatments in KOH chemical solution on microstructures of carbon blacks was investigated in terms of surface functional values and XRD measurements. And their mechanical interfacial properties of the carbon blacks/rubber composites were studied by the composite tearing energy ($G_{IIIC}$). It was found that the development of basic-surface functional groups lead to the significant physical changes of carbon blacks, such as, decrease of the interlayer spacing ($d_{002}$), increase of the crystalline size along c-axis ($L_c$), and increase of degree of crystalline (${\chi}_c$). This treatment is possibly suitable for carbon blacks to be incorporated in a hydrocarbon rubber matrix, resulting in improving the hardness and tearing energy of the resulting composites.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.43-49
• /
• 2000

Heat transfer characteristics of self oscillating heat pipe were experimentally investigated for the effect of fill charge ratios and heat loads. The heat pipe used for this study is made of copper capillary, has 0.002m internal diameter, a 0.34m length in one turn and consists of 19 turns. Heating and cooling section each have a length of 70mm. Water was used as working fluid inside heat pipe. As the experimental results, the self oscillating heat pipe was operated by self-exited oscillation and circulation of working fluid and the oscillation within the self oscillating heat pipe assumed chaotic behavior.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.2
• /
• pp.108-117
• /
• 1995

옥천층군의 상부 이질암에 속하는 구룡산층내의 함흑연질셰일층준에서 흑연단괴가 산출된다. 이들 중 덕평과 조곡지역에서 산출되는 흑연질단괴는 두 지역 모두 장경 2cm 이하의 타원체가 주이며, 조곡지역의 단괴가 덕평지역의 단괴에 비하여 더욱 신장되어 있다. 덕평지역에서는 단괴가 초기 속성기간 중에 생성된 것임을 지시해 주는 조직이 단괴와 모암의 접촉부에서 관찰되는 반면 조곡지역에서는 이러한 조직이 관찰되지 않는다. 덕평지역 단괴의 주구성 광물은흑연, 인회석, 석영, 운모이고 조곡지역 단괴의 구성광물은 흑연, 석영, 운모이다. 덕평 및 조곡지역에서 산출되는 단괴내의 총탄소함량은 각각 40%, 5% 내외의 값을 갖는다. 덕평 및 조곡지역의 탄질물의 d002는 동인한 3.356~3.360$\AA$의 범위의 값을 가진다. 이는 고진화된 흑연의 저면간격에 해당되는 것으로, 두 지역의 변성상이 동일함을 의미한다.

• Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.121-131
• /
• 2016

Organic modeling of 3D characters is a challenging task when it comes to correctly modeling the anatomy of the human body. Most sketch based modeling tools available today for modeling organic models (humans, animals, creatures etc) are focused towards modeling base mesh models only and provide little or no support to add details to the base mesh. We propose a hybrid approach which combines geometrical primitives such as generalized cylinders and cube with Shape-from-Shading (SFS) algorithms to create plausible human character models from sketches. The results show that an artist can quickly create detailed character models from sketches by using this hybrid approach.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1080-1088
• /
• 1993

The residue compounds of sulfuric acid-carbon fiber system were obtained from P100, M40, TZ307, and T300 fibers. The fibers which easily formed intercalation compound had small change of d002 value, but, large change of diameter of fiber. It was considered that the cracks in carbon fiber were due to the this conflicting result. The resistivities of residue compound of carbon fibers were increased with the large change of diameter of fibers. It is thought that the reason of our results is increasing defects such as crack in fibers. From the UV reflection spectra, it was found that reflectances of residue compounds were all decreased and the residue compounds were more stable than intercalation compounds.

• Carbon letters
• /
• v.5 no.2
• /
• pp.51-54
• /
• 2004

Isotropic pitch-based carbon fiber was isothermally activated in $CO_2$ atmosphere. Structural parameters of the isotropic carbon fibers and activated carbon fibers (ACFs) were evaluated by X-ray diffraction (XRD). The $d_{002}$ and La of the carbon fibers were measured to be 4.04 ${\AA}$ and 23.6 ${\AA}$ and those of ACFs were 4.29 ${\AA}$ and 22.7 ${\AA}$, respectively, representing less ordered through activation process. The pores in the ACFs were characterized by BET, and they showed super-high specific surface area of maximum value 3,495 $m^2/g$ from average pore size of 8.3 ${\AA}$ at 59% burn-off. It was recognized that 8-9 ${\AA}$ was optimum range of pore size for efficient creation of high specific surface area. The average size of the pores formed at higher temperature ($1100^{\circ}C$) was larger than that of the pores formed at lower temperature ($900^{\circ}C$).

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1383-1392
• /
• 1995

In this paper, the method to incorporate TCVQ(Trellis Copded Vector Quantizer) into the encoding of the wavelet trans formed(WT) image followed by a variable length coding(VLC) or an entropy coding(EC) is considered. By WT, an original image is separated into 10 bands with various resolutions and directional components. TCVQ used to compress these WT coefficients is a finite state machine that encodes the input source on the basis of the current input and the current state. Wavelet basis used in this paper is designed by orthogonal spline function. A modified set partitioning algorithm to Wang's is also presented. A simple modification to Wang's algorithm gives a highly time-efficient result. Proposed WT-TCVQ encoder shows a very competitive result, giving 37.46dB in PSNR at 1.002bpp when encoding 512$\times$512 LENA.

• East Asian mathematical journal
• /
• v.32 no.1
• /
• pp.13-25
• /
• 2016

We consider the nonlinear matrix equation $X^p+AX^qB+CXD+E=0$, where p and q are positive integers, A, B and E are $n{\times}n$ nonnegative matrices, C and D are arbitrary $n{\times}n$ real matrices. A sufficient condition for the existence of the elementwise minimal nonnegative solution is derived. The monotone convergence of Newton's method for solving the equation is considered. Several numerical examples to show the efficiency of the proposed Newton's method are presented.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.412-419
• /
• 2020

In this study, a PID control method for sweeping automatic linearization of a wavelength swept laser is proposed. First, the closedloop transfer function embodying the PID control is derived. Through the simulation of the function, K_p = 0.022, K_i = 0.008, K_d = 0.002 were obtained as the best PID coefficients for fast linear sweeping. The performance test using the PID coefficients showed that linear sweeping was held up well with a 98.7% decrement in nonlinearity after the 10th feedback, and 45 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The equipment consists of a fiber Bragg grating array, an optical-electronic conversion circuit, and a LabVIEW FPGA program. Every 5s, automatic feedback and PID control generate a new compensated waveform and produce a better linear sweeping than before. Compared with nonlinear sweeping, linear sweeping can reduce the cumbersome and time-consuming recalibration processes and produce more accurate measurement results.