• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.869-902
• /
• 1996

Flexion of a metal/ceramic fixed partial denture(EPD) frameworks under function can cause fracture of porcelain or deterioration of the cement seal. This study evaluated the flexion characteristics of three-unit mandibular FPD frameworks, repacing the second pre-molar under compressive load(200g, 400g). Testing was accompished with real-time holographic interferometry, using 6 porcelain fused-to metal frameworks. Tested alloys were non-precious alloy(Heracles, Holland), semi-precious alloy(Degudent U, Germany) and precious alloy(Degudent H, Germany). Changes of the fringe patterns according to the heat treatment(porcelain firing cycle), various loads(200g, 400g), occlusal forms(occlusal porcelain veneering, facial porcelain veneering), various alloys and post-soldering units were compared. Dental study model(Nissan dental products, Inc. D51DP-500A, Japan) and six 3-unit metal/ceramic fixed partial denture frameworks were used as experimental materials. 36 holograms were taken on fixed dental study model by using the 10mW He-Ne laser and real-time holographic interferometry. On the basis of this study, the following conclusions can be drawn : 1. In the frameworks for facial porcelain veneering, the semi-precious alloy framework was least deformed and precious alloy framework, non-precious alloy framework orderly before heat treatment, and the deformation was not shown great difference among three alloys after heat treatment and post-soldering. 2. In the frameworks for occlusal porcelain veneering, the precious alloy framework was greatest deformed and the deformation was not difference between semi-precious alloy framework and non-precious alloy framework before, after heat treatment, and the deformation was not shown great difference among three alloys after post soldering. 3. In the non-precious alloy frameworks for facial porcelain veneering and occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and conversely increased after post-soldering. 4. In the semi-precious alloy framework for facial porcelain veneering, the deformation was not detectable after heat treatment and increased after post-solder. And in the frame-work for occlusal porcelain veneering, the deformation was slightly decreased after heat treatment and increased after post-soldering. 5. In the precious alloy framework for facial porcelain veneering, the deformation was greatly decreased after heat treatment and increased after post-soldering, And in the framework for occlusal porcelain veneering, the deformation was greatly decreased after heat treatment and decreased after post-soldering.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• Korean journal of applied entomology
• /
• v.35 no.4
• /
• pp.315-320
• /
• 1996

The effects of 2-arnino-3-methyIimidazo[4,5-fq]u inoline (IQ), 2-amino-6dimethyl-dipyrido[l,2-a;3',2'-d] imidazole (Glu-P-1) and aflatoxin B1 (AFBI) on the mitotic recombinations and somatic chromosome mutations were investigated using the transgenic Drosophila bearing a chimeric gene consisting of a promoter region of Drosophila actin 5C gene and rat DNA polymerase $. For investigating mitotic recombinations and the somatic chromosome mutations, the heterozygous (mwhl+) strain possessing or lacking transgene pol P was used. The spontaneous frequency of small mwh spots, due to deletion or nondisjunction etc., in the non-transgenic w strain and the transgenic plpol $1-130 strain was 0.351 and 0.606, respectively. The spontaneous frequency (0.063) of large mwh spots, arising mostly from somatic recombination between the centromere and the locus mwh, in the transgenic plpol $1-130 strain, was about three times higher than that (0.021) of the non-transgenic w strain. The mutant clone frequencies of two types induced by two heterocyclic mines (IQ and Glu-P-1) and AFBl in the transformant pbol PI-130 were two or three times higher than those in the host strain w. These mean that rat DNA polymerase P participates at least in the somatic chromosome mutations and mitotic recombination processes. And the present results suggest that the transgenic Drosophl!~ used in this study can be used as a hypersensitive, in vivo short-term assaying system for various environmental mutagens.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.228-242
• /
• 2016

This research was conducted for understanding the evergreen forest community structure of the Bijin Island. The island was worth of vegetational value because of the representative warm temperate species such as Castanopsis cuspidata was distribute there. According to the results of community classification by TWINSPAN and DCA, the Bijin Island evergreen forest were classified by 9 communities, such as C. cuspidata, C. cuspidata-Pinus thunbergii, Neolitsea sericea-Camellia japonica, Platycarya strobilacea, Quercus serrata-Decidus broad-leaved, Alnus firma, P. thunbergii. Due to the C. cuspidata, N. sericea, Ca. japonica etc. were still dominated at canopy and under-canopy layer, so the evergreen forest will be sustain current conditions for a while if there is no artificial disturbances that were caused by human. Pl. strobilacea community will be expected to replace N. sericea and also Q. serrata-Decidus broad-leaved community will be changing caused by mutual competition. Normally, in the way of the succession process of the warm temperate forest, P. thunbergii will be expect via deciduous broad-leaved to evergreen forest such as Machilus thunbergii, C. cuspidata var. sieboldii, and N. sericea. In case of species diversity index, P. thunbergii comm.(1.2739), Q. serrata-Decidus broad-leaved comm.(1.2325), Decidus broad-leaved comm.(1.1807), and A. firma comm.(1.0854) are relatively high, while C. cuspidata and N. sericea-Ca. japonica that was dominated by evergreen species at canopy layer and P. thunbergii that was damaged by fire are relatively low(0.7380~0.8416). Soil pH was 4.72~6.33, electric conductance was 0.035~0.128dS/m, and content of organic matter was 3.4~17.4%.

• The Korean Journal of Mycology
• /
• v.45 no.2
• /
• pp.153-159
• /
• 2017

We isolated 120 strains of wild yeasts from the water and riverside soils of Daejeoncheon and Gapcheon in Daejeon, Korea. We identified Debaryomyces udenii JSF601, Kazachstania telluris JSF602, Trichosporon faecale JSF614, Candida infanticola WJSL0039, Candida palmioleophila WJSL0048, Pichia spartinae WJSL0087, and Trichosporon coprophilum WJSL0093 from Daejeoncheon, and Leucosporidium golubevii WJSL0108 and Ustilentyloma graminis WJSL0118 from Gapcheon, as newly recorded yeast strains in Korea and investigated their microbiological characteristics. All of these previously unrecorded yeasts were oval- or ellipsoidal-shaped with ascospores, except C. infanticola WJSL0039, C. palmioleophila WJSL0048, and D. udenii JSF601. L. golubevii WJSL0108 and U. graminis WJSL0118 grew in vitamin-free medium, and C. infanticola WJSL0039 was halotolerant and grew in 10% NaCl-containing YPD broth. K. telluris JSF602 and P. spartinae WJSL0087 were thermophilic yeasts, which grew at $37^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1997

$Co_{84}Hf_{16}$ (1300$\AA$, 2150$\AA$) thin films were prepared by dc magnetron sputtering method. To investigate the uniaxial anisotrpy of the sample, the saturation and effective magnetization of the thin films were measured by VSM and FMR, respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For 1300$\AA$, 2150$\AA$, the effective magnetization was measured at the temperatures from T=77K to T=300K. The results were analyzed in terms of Bloch's law $M_s(T)=M_s(0)(1BT^{3/2}CT^{5/2}$. The Bloch coefficient B and C were determined by fitting. $M_{eff}(0)$ was obtained by extrapolating $M_{eff}$ to 0 K. From this result, the spinwave stiffness constants D was also determined and the exchange stiffness constants $A_{eff}$ were calculated by Kittel's resonance conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.61-71
• /
• 1995

Natural ground is a composite consisted of the three phases of water, air and soil paircies. Among the three components, water as a material is weU understood but soil particles are not in foundation engineering. Especially, weathered granite soil generally shows a large volumetric expansion when they freeze. And, the stability and durability of the soil have shown decreased with repetitive freezing and thawing processes. These unique charcteristics may cause various construction and management problems if the soil is used as a construction material and foundation layers. This project was initiated to investigate the soil's physical and engineering characteristics resulting from freezing and freezing-thawing processes. Research results may be used as a basic data in solving various problems related to the soil's unique characteristics. The following conclusions were obtained: The degree of decomposition of weathered granite soil in Kangwon-do was very different between the West and East sides of the divide of the Dae-Kwan Ryung. Soil particles distributed wide from very coarse to fine particles. Consistency could be predicted with a function of P200 as LL=0.8 P200+20. Permeability ranged from 10-2 to 10-4cm/sec, moisture content from 15 to 20% and maximum dry density from 1.55 to 1.73 g /cmΥ$^3$ By compaction, soil particles easily crushed, D50 of soil particles decreased and specific surface significantly increased. Shear characteristics varied wide depending on the disturbance of soil. Strain characteristics influenced the soil's dynamic behviour. Elastic failure mode was observed if strain was less than 1O-4/s and plastic failure mode was observed if strain was more than 10-2/s. The elastic wave velocity in the soil rapidly increased if dry density became larger than 1.5 g /cm$^3$ and these values were Vp=250, Vg= 150, respectively. Frost heave ratio was the highest around 0 $^{\circ}C$ and the maximum frost heave pressure was observed when deformation ratio was less than 10% which was the stability state of soil freezing. The state had no relation with frost depth. Over freezing process was observed when drainage or suction freezing process was undergone. Drainage freezing process was observed if freezing velocity was high under confined pressure and suction frost process was occurred if the velocity was low under the same confined process.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.249-257
• /
• 1991

To elucidate enzymatic properties of ${\alpha}-galactosidase$ (EC 3, 2, 1, 22) from germinated soybean, changes in the enzyme activities and oligosaccharide contents during germination of soybean were determined. ${\alpha}-Galactosidase$ from germinated soybean was purified by ammonium sulfate fractionation, ion exchange chromatography and gel filtration. Their chemical and enzymatic properties was investigated. ${\alpha}-galactosidase$ activity of sobeam was maximized when it was germinated at $25^{\circ}C$ for 120 hour. Raffinose and stachyose in soybean were decomposed completely after 96 hours and 120 hours of germination, respectively. Soybean ${\alpha}-galactosidase$ was purified by 6.6 fold by ammonium sulfate fractionation, ion exchange chromatography on DEAE-Cellulose and Sephadex A-50, and gel filtration on Sephadex G-150. Its specific activity was 825 Units/mg protein and the yield was 2.5% of the total activity of crude extracts. The purified ${\alpha}-galactosidase$ of soybean was found to be homogeneous by polyacrylamide gel electrophoresis and by HPLC. Isoelectric point of soybean ${\alpha}-galactosidase$ was determined analytical isoelectric focusing to be pH 4.8. The soybean ${\alpha}-galactosidase$ was monomeric and its molecular weight was estimated to be 30,000 by SDS-PAGE. The optimal temperature and pH for the soybeam ${\alpha}-galactosidase$ activity were $40^{\circ}C$ and pH 6.0 and 75% of its activity was lost by heating at $60^{\circ}C$ for 10 min. The enzyme was appeared to have higher affinity to raffinose than to stachyose. The Km value of soybean enzyme was 5.3 mM for ${\rho}-nitrophenyl-{\alpha}-D-galactopyranoside$ and the activation energy on PNPG was calculated to be 13.02 Kcal per mole.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.292-300
• /
• 2012

We report the expression, purification, and characterization of L-asparaginase (AnsA) from Rhizobium etli. The enzyme was purified to homogeneity in a single-step procedure involving affinity chromatography, and the kinetic parameters $K_m$, $V_{max}$, and $k_{cat}$ for L-asparagine were determined. The enzymatic activity in the presence of a number of substrates and metal ions was investigated. The molecular mass of the enzyme was 47 kDa by SDS-PAGE. The enzyme showed a maximal activity at $50^{\circ}C$, but the optimal temperature of activity was $37^{\circ}C$. It also showed maximal and optimal activities at pH 9.0. The values of $K_m$, $V_{max}$, $k_{cat}$, and $k_{cat}/K_m$ were $8.9{\pm}0.967{\times}10^{-3}$ M, $128{\pm}2.8$ U/mg protein, $106{\pm}2s^{-1}$, and $1.2{\pm}0.105{\times}10^4M^{-1}s^{-1}$, respectively. The L-asparaginase activity was reduced in the presence of $Mn^{2+}$, $Zn^{2+}$, $Ca^{2+}$, and $Mg^{2+}$ metal ions for about 52% to 31%. In addition, we found that $NH_4{^+}$, L-Asp, D-Asn, and ${\beta}$-aspartyl-hydroxamate in the reaction buffer reduced the activity of the enzyme, whereas L-Gln did not modify its enzymatic activity. This is the first report on the expression and characterization of the L-asparaginase (AnsA) from R. etli. Phylogenetic analysis of asparaginases reveals an increasing group of known sequences of the Rhizobial-type asparaginase II family.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.20-29
• /
• 2006

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occulusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second permolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of $45^{\circ}$ with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.