• 한국조경학회지
• /
• 제14권3호
• /
• pp.3-19
• /
• 1987

The purpose of this study was to investigate desirable width / height ratio of enclosed space and to offer basic information for the design of enclosed spaces. The data of this study were gathered from the experiment through simulation. Photographic sampling of 7 campus sites located in Kwanak campus of Seoul National University and slides of perspective drawings of enclosed spaces with various D/H ratio (12, 1, 2, 4, 6, 9, 12)were used for simulation. A response format was made using the method of paired comparison and students from various departments were randomly selected for evaluation. In the method of analysis of data Thurstone's equation of Comparative Judgement was used for calculating preference score. A1so non-linear regression analysis was used for finding out relations between preference and D/H ratio. The other method of data analysis were correlation, Chi - test. And the results were summarized as follows. 1. In sketch simulation the ratio of D/H 4 got the highest preference store. This result suggests that desirable D/H ratio of enclosed space is D/H 4. And at the lower range of D/H ratio, as ratio increases, the preference score increases. At the higher range of D/H ratio, however, as ratio increases, the preference score starts to decrease from the cardinal point of D/H 4. 2. In campus photograph simulation preference is influenced by slope, elevation change of floor, trees, lawn area, familiarity, space arrangement, and exterior shape of building besides D/H ratio. 3. The preference virtue was not significantly affected by order effect. This result suggests that order effect can be ignored in the study of visual preference. 4. There are so many factors related to preference that it is difficult to explore those factors without scientific information based on scientific method. We must carry out study for scientific approach of planning and design based on precise, complete simulation technique.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.84-91
• /
• 2006

A heavy duty hydrogen-natural gas fueled engine can obtain stable operation at ultra lean conditions and reduce emissions extremely. Reduction of $CO_2$ in its engine is one of the most benefit. In this study, rate of hydrogen addition($R_{dH2}$) and compression ratio($\varepsilon$) were investigated including performance of this engine. As results, it was found that phenomenon of pressure oscillation when increasing $R_{dH2}$ and $\varepsilon$, it means occurring knock. It consider that pressure oscillation was increased due to fast burning speed of hydrogen. Even if same compression ratio, pressure oscillation was remarkable increased according to increasing $R_{dH2}$. Therefore, limit compression ratio of knock occurring was reduced by increasing $R_{dH2}$.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.93-102
• /
• 1996

Hydrodynamic characteristics such as gas holdup, liquid circulation velocity and bed expansion in a hexagonal inverse fluidized bed were investigated using air-water system by changing the ratio ($A_d$/$A_r$) of cross-sectional area between the riser and the downcomer, the liquid level($H_1$/H), and the superficial gas velocity($U_g$). The gas holdup and the liquid circulation velocity were steadily increased with the superficial gas velocity increasing, but at high superficial gas velocity, some of gas bubbles were carried over to a downcomer and circulated through the column. When the superficial gas velocity was high, the $A_d$/$A_r$ ratio in the range of 1 to 2.4 did not affect the liquid circulation velocity, but the maximum bed expansion was obtained at $A_d$/$A_r$ ratio of 1.25. The liquid circulation velocity was expressed as a model equation below with variables of the cross-sectional area ratio($A_d$/$A_r$) between riser to downcomer, the liquid level($H_1$/H), the superficial gas velocity($U_g$), the sparser height[(H-$H_s$)/H], and the draft Plate level($H_b$/H). $U_{ld}$ = 11.62U_g^{0.75}$${(\frac{H_1}{H})}^{10.30}$${(\frac{A_d}{A_r})}^{-0.52}$${(\frac({H-H_s}{H})}^{0.91}$${(\frac{H_b}{H})}^{0.13}$

• 대한수학회보
• /
• 제55권5호
• /
• pp.1317-1332
• /
• 2018

In this paper, we introduce the D-ratio of a rational map $f:{\mathbb{P}}^n{\dashrightarrow}{\mathbb{P}}^n$, defined over ${\bar{\mathbb{Q}}}$, whose indeterminacy locus is contained in a hyperplane H on ${\mathbb{P}}^n$. The D-ratio r(f; ${\bar{V}}$) characterizes endomorphisms and provides a useful height inequality on ${\mathbb{P}}^n({\bar{\mathbb{Q}}}){\backslash}H$. We also provide a dynamical application: preperiodic points of dynamical systems of small D-ratio are of bounded height.

• 산업기술연구
• /
• 제22권A호
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.975-976
• /
• 2006

The present paper is a parameter study of zinc flake production using a Simoloyer CM01 horizontal high energy rotary ball mill. The manufactured flakes have a dimension in thickness (t) < $1{\mu}m$ and diameters (d) 5-100 ${\mu}m$, consequently a ratio d/t up to 200. The flake geometry is mainly controlled by the variation of process parameters such as rotary speed of the rotor, ratio of powder/ball charge, load ratio of the system, process temperature, operating model and the quantity of process control agent (PCA). The Zn flakes were characterized by SEM, tap densitometry, laser diffraction and water coverage measurement.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.123-133
• /
• 2024

This study investigates the effects of loading frequency (f) and specimen size on the liquefaction resistance of clean sand. A series of cyclic direct simple shear tests were conducted on Jumunjin sand with varying consolidated relative densities (40% and 80%), f values (0.05, 0.10, and 0.20 Hz), and diameter to height (D/H) ratios (3.63, 3.18, 2.82, and 2.54). The results demonstrated the significant influence of f and D/H ratio on the number of cycles to liquefaction (N_cyc-liq) and the cyclic resistance ratio (CRR₁₅). It was observed that increasing f linearly increased N_cyc-liq. Increasing the specimen height also led to higher N_cyc-liq values irrespective of the f or relative density. Moreover, a positive correlation between CRR₁₅ and f indicated that higher f yielded higher CRR₁₅. This relationship was more pronounced in dense sand than in loose sand. Specimen height also significantly affected CRR₁₅, with increasing the specimen height resulting in higher CRR₁₅ values. Furthermore, the effect of f on CRR₁₅ was less significant compared to the influence of specimen height. The effect of f on the normalized cyclic resistance ratio (NCRR) was relatively negligible for loose sand but more substantial for dense sand depending on the D/H ratio. Data analysis revealed that the NCRR generally decreases as the D/H ratio increases. An interpolation formula was provided to calculate the NCRR based on the D/H ratio regardless of the f and relative density.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.108-113
• /
• 1997

Plate anchors are primarily used in the foundation construction of earth-supported and earth-retaining structures. In order to estimate uplift capacity as well as suction force of clay, model tests were peformed with respect to various embedment depths and two different moisture contents in the prepared saturated kaolinite. Further, suction effects on the ultimate uplift capacity, at the various embedment depths of anchor, were also taken into account. Test results show that ultimate uplift capacity including suction force increases from 4.2kg at H/D=1 upto 11.6kg at H/D=5 in K1 and from 2.3kg at H/D=1 upto 7.3kg at H/D=5 in K2 respectively. The ratio of $F_s/Q_n/$ decreases along with the increases in the embedment ratio. In general, mud suction force under the ultimate uplift capacity in kaolinite decreases or becomes constant along with the increase of the embedment ratio.

• KIEAE Journal
• /
• 제2권3호
• /
• pp.3-10
• /
• 2002

The objectives of this research are to find the problems in the courtyards of the elementary schools and to provide the new design guidelines on the environmental design applicable to the court yard of the elementary schools. To analyze the current usage condition of the court yards of the elementary schools, sixty-three elementary schools in Seoul were investigated through the architectural drawings, and then nineteen of them were selected for the detailed investigations. The survey findings testified that the orientation of the courtyard's open direction and D/H ratio would be critically important for the architectural design of the courtyard in elementary schools. From these analyses, the following guidelines would be proposed on the courtyards for the improved elementary school design. Firstly, to increase the environmental condition of the courtyard, the orientation of the courtyard's open side would not be north. Secondly, to make the environmentally friendly courtyard, it is necessary to increase the D/H ratio. Sooner or later, the courtyard of the elementary schools would be introduced very largely. Thus, it is important to figure out the elements of the environmental design of the courtyard in elementary schools. The continuous research on the elements of the environmentally friendly design of the courtyard will provide the proper direction for the better design of the elementary schools.