• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.167-171
• /
• 2004

In this Paper, We are going to propose the fire protection system with using CAN(Controller Area Network). The larger, higher and deeper buildings are, the more dangerous people are when fire happens. We are aware of the problems of prior Fire protection system. Therefore, we construct embedded system based on CAN communication that is capable of N:N communication, and build independent Fire protection system.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.42-50
• /
• 2019

3D printing AM processes have advantages in complex shapes, customized fabrication and prototype development stage. However, due to various parameters based on both the machine and the material, the AM process can produce finished output after several trials and errors in the initial stage. As such, minimizing or optimizing negative factors for various parameters of the 3D printing AM process could be a solution to reduce the trial-and-error failures in the early stages of such an AM process. In addition, this can be largely solved through software simulation in the preprocessing process of 3D printing AM process. Therefore, the objective of this study was to investigate a simulation technology for the AM software, especially Ansys Inc. The metal 3D printing AM process, the AM process simulation software, and the AM process simulation processor were examined. Through this study, it will be helpful to understand 3D printing AM process and AM process simulation processor.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.196-207
• /
• 2019

This study was carried out to investigate the effects of C. japonica, D. morbifera, D. macropodum, I. anisatum, Q. glauca and R. indica To investigate the photosynthetic ability, chlorophyll content, chlorophyll fluorescence analysis, and physiological environmental. The photosynthetic rate, cancer respiration rate, stomatal conductance, and rate of evaporation tended to decrease as a result of drying stress in the no-water condition for 28 days. I. anisatum, Q. glauca and R. indica showed a low rate of less than 40% until 28 days of no-treatment. The total chlorophyll contents were decreased in the order of D. macropodum> D. morbifera> C. japonica> Q. glauca> M. thunbergii> R. indica> I. anisatum. Chlorophyll fluorescence analysis showed that there was no change in the qP, but after 28 days no $Fv/F_m$, $F_o$, $R_{fd}$, $NPQ_{_-LSS}$ can be a useful indicator for quantitative estimation within a short period of time with a marked reduction rate of PSII quantum yield ${\Phi}PSII$ in the rectified state by continuous light during the nominal adaptation period. In the case of I. anisatum, Q. glauca and R. indica If water management can be carried out at intervals, it may be possible to plant trees in trees and landscape trees.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2410-2413
• /
• 2005

Finite element method (FEM) has been widely used as a useful numerical method that can analyze complex engineering problems in electro-magnetics, mechanics, and others. CEMTool, which is similar to MATLAB, is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present new 3D FEM package in CEMTool environment. In contrast to the existing CEMTool 2D FEM package and MATLAB PDE (Partial Differential Equation) Toolbox, our proposed 3D FEM package can deal with complex 3D models, not a cross-section of 3D models. In the pre-processor of 3D FEM package, a new 3D mesh generating algorithm can make information on 3D Delaunay tetrahedral mesh elements for analyses of 3D FEM problems. The solver of the 3D FEM package offers three methods for solving the linear algebraic matrix equation, i.e., Gauss-Jordan elimination solver, Band solver, and Skyline solver. The post-processor visualizes the results for 3D FEM problems such as the deformed position and the stress. Consequently, with our new 3D FEM toolbox, we can analyze more diverse engineering problems which the existing CEMTool 2D FEM package or MATLAB PDE Toolbox can not solve.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1189-1192
• /
• 2009

Short channel a-Si:H TFT devices with Cu electrodes have been investigated. Short channel TFTs are defined by new plasma etch process. When the channel length becomes shorter, the TFT characteristics (threshold voltage, off current, sub threshold voltage, etc.,) are degraded. These degraded characteristics can be improved through the hydrogen plasma treatment and new gate insulator structure. Using these processes, 15.0 inch XGA LCD panel was fabricated successfully where the channel length of the TFT devices was about 2.5 micrometers.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.10
• /
• pp.1-7
• /
• 1997

This paper proposes a new real-time 2-D convolver filter architecture wihtout using any multiplier. To meet the massive amount of computations for real-time image processing, several commercial 2-D convolver chips have many multipliers occupying large VLSI area. Te proposed architecture using only one shift-and-accumulator can reduce the chip size by more than 70% of commercial 2-D convolver filter chips and can meet the real-time image processing srequirement, i.e., the standard of CCIR601. In addition, the proposed chip can be used for not only 2-D image processing but also 1-D signal processing and has bood scalability for higher speed applications. We have simulated the architecture by using VHDL models and have performed logic synthesis. We used the samsung SOG cell library (KG60K) and verified completely function and timing simulations. The implemented filter chip consists of only 3,893 gates, operates at 125 MHz and can meet the real-time image processing requirement, that is, 720*480 pixels per frame and 30 frames per second (10.4 mpixels/second).

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.6
• /
• pp.67-76
• /
• 1997

In radar signal processing, an A/D converter with sufficient dynamic range and high sampling speed is required to detect the weakest target signals in heavy clutter and ECM environments. As the sampling frequency increases, the amount of digital data transfered to the signal processing module is also increased. To overcome these massive data transfer burden, we need an A/D conversion module with an enough data transfer rate. In this paper, we proposed an implementation scheme of a new A/D conversio module that can be used in multi-mode 3-D phased array radar signal processing system, and evaluated the performance. The proposed A/D conversion module is implemented with a standard A/D converter and a 6U-standard VME bus.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.1035-1045
• /
• 2023

We propose a novel graphics processing unit (GPU) algorithm that can handle a large-scale 3D fast Fourier transform (i.e., 3D-FFT) problem whose data size is larger than the GPU's memory. A 1D FFT-based 3D-FFT computational approach is used to solve the limited device memory issue. Moreover, to reduce the communication overhead between the CPU and GPU, we propose a 3D data-transposition method that converts the target 1D vector into a contiguous memory layout and improves data transfer efficiency. The transposed data are communicated between the host and device memories efficiently through the pinned buffer and multiple streams. We apply our method to various large-scale benchmarks and compare its performance with the state-of-the-art multicore CPU FFT library (i.e., fastest Fourier transform in the West [FFTW]) and a prior GPU-based 3D-FFT algorithm. Our method achieves a higher performance (up to 2.89 times) than FFTW; it yields more performance gaps as the data size increases. The performance of the prior GPU algorithm decreases considerably in massive-scale problems, whereas our method's performance is stable.

• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.21-36
• /
• 2009

The objective of the study is to create color plan for company D based on color images of the Bloomsbury Group paintings, which is an art institute based in Bloomsbury, London, a hometown of the company, to renew the traditional brand image of the company by blending fashion and art. This study analyzed 'D's previous F/W Color planning from 2003 to 2007 through NCS to understand characteristics of company D's color planning. It considered company D's color renewal concept by looking into Bloomsbury Group's backgrounds and pieces. Based on 2008-2009 F/W color trend and the analysis result, the study suggests a color plan with reference to a case study of the company D, for which I work as a colorist. The color renewal of the company D for 2008-2009 F/W season was categorized into theme I. Bloomsbury and theme II. Charleston for planning. The following table summarizes the result of 2008-2009 F/W season color plan with focus on development of new check and print patterns. The significance of the study can be found in that it advanced beyond the color planning stage to be applied to the actual renewal. Through a renewal of an existing brand, a fashion brand can be revitalized to have distinguished competitiveness.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1991-1996
• /
• 2011

The detail design of overhead line can be dievided into a pegging plan and MD(Mounting Diagram) process. A program can perform a MD process was already developed and used in Honam High-Speed project. In this study, a pegging plan program which can perform mast distribution automatically is developed. The system is developed based on dot net framework 4.0 and Civil3D 2012 and used spread 4.0 component for grid UI. It can not be directly used a rail horizontal alignment and long-section profile together on drawing. Therefore using Civil3D, mathematical alignment and profile of rail can be accomplished. And this program has an advantage of user friendly operation because of close relationship between the two.