• 전기학회논문지
• /
• 제56권6호
• /
• pp.1031-1034
• /
• 2007

Electric transmission lines pass through a variety of area. Foundation supporting the conductors and tower are selected properly in accordance with external load, for example dead load, wind load, snow load, construction load etc, and topography and geology condition. Typical types of foundation are as follows: pad foundation for small load and hard soil or rock in mountainous area, pile foundation for medium or large load and soft soil in plain field area. This paper introduced cylindrical foundation design & construction for large load and mountainous area. This foundation failure mode against pulling-out show splitting failure by tensile force toward circumferential direction.

• Geomechanics and Engineering
• /
• 제4권1호
• /
• pp.19-37
• /
• 2012

This paper presents the results of analytical and numerical analyses of the effects of performing a pressuremeter test or driving a pile in clay. The geometry of the problem has been simplified by the assumptions of plane strain and axial symmetry. Pressuremeter testing or installation of driven piles has been modelled as an undrained expansion of a cylindrical cavity. Stresses, pore water pressures, and deformations are found by assuming that the clay behaves like normally consolidated modified Cam clay. Closed-form solutions are obtained which allow the determination of the principal effective stresses and the strains around the cavity. The analysis which indicates that the intermediate principal stress at critical state is not equal to the mean of the other two principal stresses, except when the clay is initially isotropically consolidated, also permits finding the limit expansion and excess pore water pressures by means of the Almansi finite strain approach. Results are compared with published data which were determined using finite element and finite difference methods.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.593-601
• /
• 2023

In this paper, an analytical solution of large-strain cylindrical cavity expansion in compaction grouting problem under temperature field is given. Considering the stress increment caused by temperature, the analytical solution of cavity expansion under traditional isothermal conditions is improved by substituting the temperature stress increment into the cavity expansion analysis. Subsequently, combined with the first law of thermodynamics, the energy theory is also introduced into the cylindrical cavity expansion analysis, and the energy dissipation solution of cylindrical cavity expansion is derived. Finally, the validity and reliability of solution are proved by comparing the results of expansion pressure with those in published literatures. The results show that the dimensionless expansion pressure increases with the increase of temperature, and the thermal response increases with the increase of dilation angle. The higher the exothermic temperature of grouting slurry, the greater the plastic deformation energy of the surrounding soil, that is, the greater the influence on the surrounding soil deformation and the surrounding environment. The proposed solution not only enrich the theoretical system of cavity expansion, but also can be used as a theoretical tool for energy geotechnical engineering problems, such as CPT, nuclear waste disposal, energy pile and chemical grouting, etc.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.32-41
• /
• 2000

Sand drain as a vertical drainage is widely used in soft ground improvement Recently, sand, the principal source of sand drain, is running out. The laboratory model tests were carried out to utilize gravel as a substitute for sand. Though which the characteristics of gravel are compared to those of sand for engineering purpose. Two cylindrical containers for the model test were filled with marine clayey soil from the west coast of Korea with a column in the center, one with sand, the other with gravel. Vibrating wire type piezometers were installed at the distance of 1.0D, 1.5D and 2.0D from the center of the column. The characteristics of consolidation were studied with data obtained from the measuring instrument place on the surface of the container. The parameter study was performed on the marine clayey soil before and after the test in order to verify the effectiveness of the improvement. The clogging effect was checked at various depth in gravel column after the test. In-situ tests area was divided into two areas by material used. One is Sand Drain(SD) and Sand Compaction Pile(SCP) area, the other is Gravel Drain(GD) and Gravel Compaction Pile(GCP) area. Both areas were monitored to obtain the information on settlement, pore water pressure and bearing capacity by measuring instruments for stage loading caused by embankment. The results of measurements were analyzed. According to the test results, the settlement was found to be smaller in gravel drain than in sand drain. The increase in bearing capacity by gravel pile explains the result. The clogging effect was not found in gravel column. It is assumed that gravel is relatively acceptable as a drainage material. Gravel is considered to be a better material than sand for bearing capacity, and it is found that bearing capacity is larger when gravel is used as a gravel compaction pile than as a gravel drain.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.109-119
• /
• 1998

Recently pipe-framed greenhouses are widely constructed on domestic farm area. These greenhouses are extremely light-weighted structures and so are easily damaged under strong wind due to the lack of uplift resistance of foundation piles. This experiment was carried out by laboratory soil tank to investigate the displacement be haviors of cylindrical pile foundations according to the uplift loads. Tested soils were sampled from two different greenhouse areas. The treatment for each soil type are consisted of 3 different soil moisture conditions, 2 different soil depths, and 3 different soil compaction ratios. Each test was designed to be repeated 2 times and additional tests were carried out when needed. The results are summarized as follows : 1. When the soil moisture content are low and/or pile foundations are buried relatively shallow, ultimate uplift capacity of foundation soil was generated just after begining of uplift displacement. But under the high moisture conditions and/or deeply buried depth, ultimate up-lift capacity of foundation soil was generated before the begining of uplift displacement. 2. For the case of soil S$_1$, the ultimate uplift capacity of piles depending on moisture contents was found to be highest in optimum moisture condition and in the order of air dryed and saturated moisture contents. But for the case of soil S$_2$, the ultimate uplift capacity was found to be highest in optimum moisture condition and in the order of saturated and air dryed moisture contents. 3. Ultimate uplift capacities are varied depending on the pile foundation soil moisture conditions. Under the conditions of optimum soil moisture contents with 60cm soil depth, the ultimate uplift capacity of pile foundation in compaction ratio of 80%, 85%, and 90% for soil 51 are 76kg, 115kg, and 155kg, respectively, and for soil S$_2$are 36kg, 60kg, and 92kg, respectively. But considering that typical greenhouse uplift failure be occurred under saturnted soil moisture content which prevails during high wind storm accompanying heavy rain, pile foundation is required to be designed under the soil condition of saturated moisture content. 4. Approximated safe wind velosities estimated for soil sample S$_1$and S$_2$are 32.92m/s and 26.58m/s respectively under the optimum soil condition of 90% compaction ratio and optimum moisture content. But considering the uplift failure pattern under saturated moisture contents which are typical situations of high wind accompanying heavy rain, the safe wind velosities for soil sample S$_1$and S$_2$are not any higher than 20.33m/s and 22.69m/s respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.227-234
• /
• 2004

Sand compaction pile (SCP) method is composed of compacted sand pile inserted into the soft clay deposit by displacement method. SCP-reinforced ground is composite soil which consists of the SCP and the surrounding soft soil. When a surcharge load is applied on composite ground, time-dependent behavior occurs in the soft soil due to consolidation according to radial flow toward SCP and stress transfer also takes place between the SCP and the soft soil. This paper presents the numerical results of cylindrical composite ground that was conducted to investigate consolidation characteristics and the stress transfer mechanism of SCP-reinforced composite ground. The results show that the consolidation of soft clay has a significant effect on the stress transfer mechanism and stress concentration ratio of composite ground

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1982년도 제24회 수공학 연구발표회 논문초록집
• /
• pp.105-120
• /
• 1982

The circular cylindrical piles are extensively used in near shore structures. For the purpose of analysing stability of vertical pile, we must consider the horizontal force, the lift force, and the traverse force etc. In this paper author studied horizontal force acts on the vertical circular pile and investigated the relation between the floating body coefficients C$$ and U$$T/D.

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.69-77
• /
• 2019

본 논문에서는 테이퍼 마찰말뚝의 자유진동을 평가할 수 있는 해석모델을 제안하였다. 불균질 지반에 설치된 정적 수직하중을 받는 테이퍼 마찰말뚝의 자유진동을 지배하는 미분방정식을 유도하였다. 이 지배방정식을 Runge-Kutta 법을 이용하여 직접 수치적분하였고, 미분방정식의 고유치인 고유진동수는 Regula-Falsi 법을 이용하여 산정하였다. 원통형 말뚝의 고유진동수 계산값은 기존 문헌값과 잘 일치하였다. 수치예를 통해 말뚝의 변단면, 주면마찰력, 단부조건, 수직압축하중 및 지반의 불균질성이 고유진동수와 모드형상에 미치는 영향을 분석하였다.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.59-68
• /
• 2007

본 논문에서는 토조에 실시된 모형말뚝 재하실험과 콘관입실험을 통하여, 말뚝형태별 지지력 특성분석과 CPT지지력 상관계수를 평가하였다. 고려된 말뚝의 형태는 일반적인 현장타설말뚝에 적용되는 원통형 말뚝과 테이퍼형 말뚝이 고려되었다. 본 연구는 궁극적으로 강관주 송전탑의 기초구조물 형식개발과 설계기준 수립을 목표로 하고 있으며, 이를 위해 기초형식별 거동과 지반상태의 영향 등을 중점적으로 살펴보았다. 말뚝 토조실험을 통해 나타난 결과에 의하면, 원통형 및 테이퍼형 말뚝의 전체지지력의 차이는 크지 않았으나, 개별 지지력요소의 거동은 말뚝형태별로 상이한 것으로 나타났다. 토조실험결과와 동일한 지반조건에 대해 수행된 CPT결과를 통해 말뚝지지력과 콘지지력의 관계를 나타내는 CPT지지력 상관계수의 변화추이를 도출하였다. CPT상관계수는 원통형 및 테이퍼형 말뚝형태를 비교함으로써 나타내었으며, 선단지지력과 주면마찰력의 요소별 변화추이를 제안하였다.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.61-69
• /
• 2007

본 연구에서는 현장타설말뚝을 대상으로 지반조건 및 말뚝형태에 따른 수평지지력과 수평거동에 대하여 실험적 분석을 실시하였다. 이를 위해 가압토조실험을 수행하였으며 상대밀도와 지반응력의 변화를 고려하여 원통형과 테이퍼형 말뚝에 대해 재하시험을 수행하였다. 토조실험결과, 수직응력과 수평응력은 모두 말뚝의 수평거동 및 극한수평 지지력에 영향을 나타내는 것으로 관찰되고 있으나, 수평응력의 영향이 보다 더 크게 작용하고 있음을 알 수 있다. 상대밀도 또한 수평거동 및 지지력에 상당한 영향을 미치고 있는 것으로 나타나고 있었다. 수평거동에 대한 말뚝형태의 영향은 지반상태에 따라 다소간의 차이가 보이고 있으나, 전반적으로 지반응렬이나 상대밀도와 같은 지반특성치에 의한 영향에 비해서는 작게 나타나고 있었다. 기존 예측식을 이용한 비교분석 결과, 기존의 예측식에 의해 산정된 결과는 실측된 결과와 상당한 차이를 보이고 있었으며, 이는 지지력 산정시 수평응력의 변화량이 고려되어 있지 않았기 때문임을 알 수 있었다.