• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.49-51
• /
• 2009

This paper deals with the analysis on eddy current losses for cylindrical linear oscillatory actuator (LOA) with Halbach array mover according to voltage waveform. This paper presents analytical procedures for calculation of eddy current losses using Poynting theorem. On the basis of the magnetic vector potential and a two-dimensional (2-d) cylindrical coordinate system, this paper derived analytical solutions of eddy current tosses using phase current analysis. The eddy current losses of each harmonic obtained by fast Fourier transform (FFT) analysis of phase current are compared with results obtained from finite-element method (FEM). Particularly, this paper shows that the eddy current losses of cylindrical LOA according to square voltage waveform are more significant than those according to sinusoidal voltage waveform.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.439-455
• /
• 2023

Free surface fluid oscillation in prolate spheroidal tanks has been investigated analytically in this study. This paper aims is to investigate the sloshing frequencies in spheroidal prolate tanks and compare them with conventional cylindrical and spherical containers to select the best tank geometry for use in space launch vehicles in which the volume of fuel is very high. Based on this, the analytical method (Fourier series expansion) and potential fluid theory in the spheroidal coordinate system are used to extract and analyze the governing differential equations of motion. Then, according to different aspect ratios and other parameters such as filling levels, the fluid sloshing frequencies in the spheroidal prolate tank are determined and evaluated based on various parameters. The natural frequencies obtained for a particular tank are compared with other literature and show a good agreement with these results. In addition, spheroidal prolate tank frequencies have been compared with sloshing frequencies in cylindrical and spherical containers in different modes. Results show that when the prolate spheroidal tank is nearly full and in the worst case when the tank is half full and the free fluid surface is the highest, the prolate spheroidal natural frequencies are higher than of spherical and cylindrical tanks. Therefore, the use of spheroidal tanks in heavy space launch vehicles, in addition to the optimal use of placement space, significantly reduces the destructive effects of sloshing.

• 천문학회보
• /
• 제37권1호
• /
• pp.83.1-83.1
• /
• 2012

We have developed an self-consistent PDR model to synthesize warm CO lines of Herschel/PACS observations more accurately. The PDR model solves the FUV continuum radiative transfer, gas energetics, and chemistry simultaneously. A local FUV radiation flux is calculated by using a Monte Carlo method taking anisotropic scattering into account. A new (r, ${\delta}$) coordinate system was used, where the r is the distance from the origin and the ${\delta}$ is z/$R^2$ in the cylindrical coordinate of (R,z). This is an adequate coordinate system to represent a power-law density of an envelope and a high spatial resolution near the outflow wall. The gas enegetics and chemistry are solved locally and considered $10^4K$ blackbody radiation field instead of the interstellar radiation filed. This newly developed model can be used to analyze quantitatively the effect of UV-heated outflow walls on the warm molecular lines in the embedded proto-stellar objects.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1054-1061
• /
• 2007

본 논문에서는 2D 원통형 좌표계 구조를 해석하기 위한 전자기 수치 해석 방법 중 하나인 시간영역 유한차분법(FDTD)에서 필요한 흡수경계조건으로 UPML과 Liao 흡수경계조건을 비교하였다. 일반적인 2D 직각 좌표계에서는 UPML의 성능이 Liao의 흡수경계조건보다 우수하지만, 본 논문에서 가정한 2D 원통형 좌표계에서는 Liao에 의해 제안된 고유의 흡수경계조건이 UPML과 수정된 Liao 흡수경계조건보다 우수한 것으로 나타났다. 원통형 좌표계는 축에 대해서 대칭이기 때문에 3D 구조를 2D 구조로 가정할 수 있다는 점에서 안테나를 비롯한 다양한 마이크로파 회로의 특성해석에 널리 사용될 수 있는데, 정확한 수치해석 결과를 얻기 위해서 다양한 구조에 대한 흡수경계조건들의 비교와 검증이 필요하다.

• 전기의세계
• /
• 제29권7호
• /
• pp.460-470
• /
• 1980

The design of a control unit for a playback-type industrial robot is studied. Implemented for the cylindrical-coordinate type industrial robot with 5 degrees of freedom, the control unit constructed for the study consists of (i) z-80 .mu.p-based .mu.-computer control system (ii) Teach-Box for work command, and (iii) various softwares for generating signals for servo driving unit and operating the robot as playback-type. Softwares are developed by using high level Basic Language and low level z-80 Assembly Language for ease of programming and speed of program execution. To show the effectiveness, and example is included.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1036-1043
• /
• 2003

A computer simulation method for investigating the form generation mechanism in the centerless through-feed grinding process is described. The length of the contact line and the magnitude of the grinding force between the grinding wheel and workpieces, vary with the change in the axial location of the current workpiece during grinding. Thus, a new coordinate system and a grinding force curve of previous and/or following workpieces are introduced to treat the axial motion. Experiments and computer simulations were carried out using four types of cylindrical workpiece shapes. To validate this model, simulation results are compared with the experimental results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.156-159
• /
• 2003

The analytic solution of displacements of thin cylindrical pressure vessel made by carbon fiber T700/Epoxy was obtained using equilibrium equations of orthogonal curvilinear coordinate system. Equilibrium equations with the assumed displacement field were derived from a reasonable description of the behavior of thin elastic shells using principle of virtual work. Some analyses of the theoretical solution are presented and compared with the results of hydraulic tests of the pressure vessel.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.346-352
• /
• 2010

This paper presents an intuitive interface scheme for controlling a hydraulic backhoe, which is a piece of excavating equipment consisting of a digging bucket on the end of a two-part articulated arm, and typically mounted and rotated on the back of a tractor or front loader. The passive levers/joysticks for actuator operations of a hydraulic backhoe are replaced into electric joysticks with a robotic controller, which will generate the end-effecter command trajectories of the backhoe through joystick rate control in cylindrical coordinate. The developed backhoe with the hydraulic control system showed the maxim position error of 3 cm with intuitive coordinate operations, which would be helpful for conveniently performing various excavating tasks with natural and effective ways.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.785-799
• /
• 2015

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies of hyperboloidal shells free at the top edge and clamped at the bottom edge like a hyperboloidal cooling tower by the Ritz method based upon the circular cylindrical coordinate system instead of related 3-D shell coordinates which are normal and tangent to the shell midsurface. The Legendre polynomials are used as admissible displacements. Convergence to four-digit exactitude is demonstrated. Natural frequencies from the present 3-D analysis are also compared with those of straight beams with circular cross section, complete (not truncated) conical shells, and circular cylindrical shells as special cases of hyperboloidal shells from the classical beam theory, 2-D thin shell theory, and other 3-D methods.

• 한국융합학회논문지
• /
• 제10권12호
• /
• pp.17-22
• /
• 2019

네트워크 트래픽 세션 데이터를 이용한 공격 분석 및 시각화 방법들은 세션 데이터 내의 송신지 및 수신지 IP주소 및 연결관계를 시각화하여 네트워크 이상 현상들을 감시한다. 트래픽의 송수신 방향은 이상 현상을 탐지하는데 있어서 매우 중요한 특징이지만, 단순히 송신지와 수신지 IP주소를 좌·우 또는 상·하 대칭적으로 시각화하는 것은 분석을 난해하게 만드는 요소가 된다. 또한, 시계열적인 트래픽 세션들의 시간 특성을 고려하지 않고 시각화 인터페이스를 설계할 경우에는 시간별 보안 상황 정보가 손실되는 위험을 감수해야 한다. 본 논문에서는 방사축을 이용하여 시계열 트래픽 데이터를 시각화하고 IP주소를 네트워크 부분과 호스트 부분으로 분할 및 원통좌표계에 표출시켜 효과적으로 네트워크 공격을 감시할 수 있는 시각화 인터페이스와 분석 방법을 제안하고자 한다. 제안하는 방법은 네트워크 공격을 직관적으로 인지하고 공격 활동을 시간흐름에 따라 파악할 수 있는 장점을 가진다.